AutoEnginuity OBD-II ScanTool Release Notes

AutoEnginuity OBD-II ScanTool Release Notes

(C) Copyright 2003 - 2017

AutoEnginuity would like to announce the release of Giotto scan tool software. Giotto is a first of its kind touch-based scan tool making the user-experience faster and smarter, while remaining a powerful tool.
Giotto 15.2 introduces more BMW-specific Service Functions for diesel / petrol engines / electric machine motors as well as the ADAS Service Functions (SWW / KAFAS / STML). For Nissan / Infiniti camera calibration and Freeze Frame Data (FFD) was added with a host of new Work Support functions. Finally, Chrysler / Dodge includes a dozen new service functions.

Giotto Version 15.2.0
---------------------
General
• Improved Clearing DTCs by adding a display showing which system is currently being cleared

BMW / MINI
• Improved VIN decoding for all models
• Added X5 iDrive 40e full model support
• Added Fuel Pump Control Module (EKPS) '12 - 16 Service Functions:
Activate Electric Fuel Pump Control
Reset Production Mode for Fuel Pump Control
Bleed Fuel System
• Added Electrical Machine Electronics (EME) Service Function:
Rotor Position Sensor Adjustment
• Added Headlight Driver Module (STML / STMR) Service Function:
Initialize New Headlight Driver Module and Teach-In Turn Indicator
• Added Lane Change Warning (SWW) Service Functions:
Adjustment of SWW Control Unit
Adjustment of SWW Slave
• Added Vario Transfer Case (VTG) Service Function
Transferbox Calibration
• Added DDE N47 / N57 '14 - 16 SCR and DDE Service Functions:
Diesel Particulate Filter Regeneration
Diesel Particulate Filter Register Replacement
Reset SCR Switch-Off Scenario
Reset Exhaust Emission System
Reset Fuel System
Reset Air Mass System
Reset SCR Exhaust System
Reset Tank System
Reset SCR Meter Module
Reset SCR AdBlue
Register Replacement SCR Catalytic Converter
• Added DME N20 '10 - 16 Service Functions:
Delete Adaptation Variable Camshaft Timing Control
Reset Adaptation Values and Taught Versions
Valvetronic Adjustment Limit Positions
Fuel Consumption Display Adjustment Reset Calibration To Zero
Fuel Consumption Display Adjustment Store Value Permanently
• Added DME N55 '10 - 16 Service Functions:
Delete Adaptation Variable Camshaft Timing Control
Reset Adaptation Values and Taught Versions
Valvetronic Adjustment Limit Positions
Fuel Consumption Display Adjustment Reset Calibration To Zero
Fuel Consumption Display Adjustment Store Value Permanently
Read Out Injector Quantity Consumption Values
• Added DME S55 '10 - 16 Service Functions:
Delete Adaptation Variable Camshaft Timing Control
Reset Adaptation Values and Taught Versions
Valvetronic Adjustment Limit Positions
Fuel Consumption Display Adjustment Reset Calibration To Zero
Fuel Consumption Display Adjustment Store Value Permanently
Read Out Injector Quantity Consumption Values
Teach-in Valvetronic Lift Values
• Added DME N63 '10 - 16 Service Functions:
Activation Of Electric Fuel Pump Control Electronics
Reset Mixture Adaptation
Reset VANOS Adaptation Values
Reset Adaptation Values Of Fuel System
Reset Valvetronic Lift Adaptation
Reset Adaptation Values Of The Increment Wheel
Teach-in Valvetronic Lift Values
Register Teach Acceleration Sensor

Ferrari / Maserati
• Fixed Clear All request not working on all but the system connected too
• Fixed F430 (F131E) missing SX ME7.1.1 Enhanced Powertrain not being shown

Ford-family
• Fixed Enhanced Powertrain Fuel Rail Pressure - Desired for the '05 - '07 6.8l engines
• Fixed Focus Electric '12 - '16 missing some PIDs
• Fixed Focus '12 - '16 missing Oil Life Remaining and Low Side Fuel Pressure PIDs
• Fixed Powerstroke 6.4l Fuel Rail Pressure and Fuel Rail Pressure - Desired maximum limits being too low

Hyundai / Kia
• Added HUD full system support
• Added AMP full system support
• Added I-Box full system support
• Added BCM full system support for (PS and VG chassis)
• Improved VIN decoding for all models

Jaguar
• Added XE model support

Nissan / Infiniti
• Added Freeze Frame Data (FFD) support (e.g., Ignition Counter, Odometer, etc.)
• Added All Around Camera CAN Work Support functions: Initialize Camera Image Calibration, Steering Angle Sensor Adjustment, Calibrating Camera Image (Front / Passenger / Driver / Rear)
• Added Chassis Control Work Support functions (Erase Last Driver Information, Erase Key Allotment User, Erase Personal Settings)
• Added Meter CAN Work Support function Diagnosis Series
• Added Mutli AV CAN Work Support function Steering Angle Sensor Adjustment
• Added Sonar CAN Work Support function Volume Setting
• Added Telematics CAN Work Support function TCU Activate

Toyota-family
• Fixed 15'+ Camry and Corolla EnhancedPowertrain not showing the CVT sensors

Giotto Version 15.1.0
--------------------
Audi / VW
• Added new ASAM Datasets
• Added new SRI settings and added some more information in the instructions when performing the SRI Reset for CANTP20 modules

BMW / MINI
• Added support to show DTC Details (Mileage Reading, Information Entry, and TimeStamp)
• Added Normalize Driver Door for F07 / F10 / F11

Chrysler-family
• Added more instruction notes for writing VIN on the CM84x modules
• Added instructions for setting tire size on modules that have a CAN-based BCM gateway on how to clear the ABS light if it's on after setting a new tire size
• Added DPF Regen system test for the PCM Var 17 module (i.e. Jeep Grand Cherokee 3.0L Diesel '15)
• Fixed issue pulling codes on SCI Engine B Network for Cummins (i.e., 2004)

Ferrari / Maserati
• Fixed Scaglietti 612 (F137) '05 - '07 Steering Assistance not connecting
• Fixed Scaglietti 612 (F137) '05 - '06 Airbag not showing support
• Fixed Scaglietti 612 (F137) '05 - '06 Instrument Cluster not showing support

Ford-family
• Added TPMS Sensor Training Mode for '16MY vehicles
• Added Fusion HEV '14 - '16 Electric Parking Brake Maintenance Mode
• Added Transit '15 - '16 BCM Crash Reset Status
• Added Powerstroke 6.4L DPF Regeneration
• Added Powerstroke 6.7L DPF Regeneration
• Added Powerstroke 6.7L SCR Dosing Measurement Test
• Added Powerstroke 6.7L SCR Visual Leak Test
• Finalized Explorer '16MY system coverage
• Finalized MKZ and MKC '16MY system coverage

GM-family
• Added Theft Deterrent Module for the Pontiac Wave '09 - '10

Honda / Acura
• Improved retrieving codes from SRS we attempt to pull codes from OPDS and SWS as well
• Added the following new systems:
• Wireless Charger
• Body Control Module
• High Beam Support System
• Front Wiper Module
• Rain / Light Sensor Module
• Multi-View Camera System
• Added the following System Tests:
• Crank Pattern Clear [PGMFI CAN Module] • Crank Pattern Relearn [PGMFI CAN Module]

Jaguar
• Improved support so older XJ and XK models body controllers no longer auto detect sensor list, it is loaded per Jaguar tables
• Fixed older XK Climate Control Module not connecting with ProLine VCI and ProLine VCI Plus

Mercedes Benz
• Added missing M Class (W163) AB2 DTCs from 0x80 - 0x85 series controllers
• Added Sprinter '14+ new CDI engine
• Finalized S Class (222) model support (Including General Maintenance Reset)
• Fixed Sprinters (905) '01 - '03 missing Enhanced Powertrain

Subaru
• Added '15 - '17 ABS / VDC CAN Work Support functions ABS Sequence Mode, Brake Maintenance Mode, Check Mode, and VDC Centering Mode

Toyota-family
• Added Intuitive P/A Detection / Steering Adjustment (Front Sensor, Rear Sensor, and Battery / SAS Replacement)
• Fixed decoding Corolla '14+ VINs
• Fixed Camry '10 - '11 Airbag not connecting

Giotto Version 15.0.3
---------------------
• Added Spanish support
• Fixed single-clicking the vehicle make allowing the Next button to become active

Giotto Version 15.0.2
---------------------
Audi / VW
• Included the DTC that caused the Freeze Frame in the title so that when a report is generated you are able to determine which DTC caused said freeze frame

Chrysler-family
• Included the DTC that caused the Freeze Frame in the title so that when a report is generated you are able to determine which DTC caused said freeze frame

Ford-family
• Added Powerstroke 6.7L Particulant Filter Monitor Bank 1 Mode 6 support
• Added Powerstroke 6.7L '11 - '16 Fuel Mass Observed Reset support
• Added Powerstroke 6.7L Commanded EGR A, Commanded FRP A, EGR Valve Position Desired, and EGR Cooler Bypass Valve actuations support
• Fixed Powerstroke 6.7L Variable Geometry Turbocharger actuation
• Fixed Powerstroke 6.7L EGT B1S4 not reporting

GM-family
• Included the DTC that caused the Freeze Frame in the title so that when a report is generated you are able to determine which DTC caused said freeze frame
• Fixed CKP Relearn for a Chevrolet K1500 Suburban 5.3 Liter '99

Toyota-family
• Added TVD and Active Rear Wing support for LFA and RC-F models
• Fixed Immobilizer on some Lexus not initializing

Giotto Version 15.0.0
---------------------
• Fixed status of the battery voltage disrupting the vehicle communications

Audi / VW
• Changed Passat CC model to CC

BMW / MINI
• Added support to show large ASCII data sets in live data stream (i.e., VINs ans serial numbers)
• Added Selective Catalyst Reduction full system support for new N47 and N57 DDE
• Added 328d (F30) full model coverage
• Added X4 (F26) full model coverage
• Improved vehicle model selection by now requiring the Chassis type selection to prevent overlapping production years
• Fixed X5 (F25) '13 - '15 Steering Angle Calibration on EPS reporting the operation failed even when it succeeded
• Fixed VIN pulling using Generic OBDII commands stopping the DME from talking without turning car Off and On. Now using BMW specific VIN command

Chrysler-family
• Added missing Transmission system selection for the Jeep Wrangler '14
• Added VIN programming for the CM551, CM845, and CM848 Cummins modules
• Fixed system support list for the Chrysler 300 '12 LX Body
• Fixed Actuations on the Jeep Grand Cherokee 3.0L Diesel '07 (PCM Var 04)
• Improved ECM detection for '99 - '05 Cummins vehicles

Ferrari / Maserati
• Added FF model support
• Added limited 488 GTB model support

GM-family
• Added C body code support for the 4.8 Liter LY2 (C) '09 engine selection
• Added Steering Sensor and Torque Sensor Calibration for the Saturn Vue '07 - '10, Chevrolet Equinox '07 - '09, and Pontiac Torrent '07 - '09
• Added the BPP Sensor Learn for the Command ARC BCM modules '08 - '12
• Fixed Turbo Solenoid Control on the 6.6 Liter LLY '05 engine
• Fixed model selection being out of order for the Caprice Classic
• Fixed Automatic Brake Bleed timing for the GMC Yukon '03

Honda / Acura
• Added VIN programming for CAN-based engine modules
• Added support for ABS System being auto detected

Mercedes Benz
• Added GLC Class (253) model support
• Added support to show large ASCII data sets in live data stream (i.e., VINs ans serial numbers)
• Added AAM (M Class 163) Erase Crash Memory and Windshield Rain Sensor Learn system functions
• Added C Class (205) ESP Electric Parking Brake (Apply / Release), Move to Assembly Position, TeachIn Yaw Rate, Lat and Long Sensor, Resetting Value Offset Value for SAS
• Added GLK Class (X204) '13 - '15 Rear SAM full system support
• Added GLK Class (X204) '10 - '15 Trailer Module full system support
• Added GL Class (X166) '13 - '16 Trailer Module full system support
• Added G Class (463) '10 - '16 Tire Pressure (TPC) full system support

Giotto Version 14.3.0
---------------------
Audi-family
• Added more variant match sets for ASAM dataset modules
• Changed the final entry in the SRI test from 'Perform SRI Reset' to 'Commit Changes'
• Updated Audi / VW model VIN Decoding
• Removed New Beetle as we handle those vehicles as just a Beetle
• Cleaned up sensor list for supported modules
BMW / MINI
• Added automated VIN decoding for models in EU / UK
• Added 316d F30 / F31 model '12MY - 15MY coverage
• Added Enhanced Powertrain DDE N47 Variant C0 complete system coverage
• Added Enhanced Powertrain DDE N47 Variant B0 complete system coverage
• Fixed Gearbox Control (VTG) Reset Oil Special Function operating too quickly for some models

Chrysler-family
• Cleaned up displayed sensor list for supported modules

GM-family
• Added support for the Chervolet City Express '15
• Added TR Switch A/B/C/P for Allison Transmission modules (i.e., '09 6.6 Liter LMM)
• Added Transmission ISS to 6.0 Liter LQ4 (U) '02

Honda / Acura
• Added actuations to the ABS CAN-based module
• Added Initialization of the Sensors Calibration to the ABS CAN-based module
• Added Neutral Point Calibration of All the Sensors to the ABS CAN-based module
• Added Neutral Rewrite to the Electronic Power Steering module
• Removed Civic 5 Door as we handle those vehicles as just a Civic
• Removed CRZ Hybrid as we handle those vehicles as just a CRZ

Nissan / Infiniti
• Added Lane Camera system support
• Added Navara (D23) model support
• Finalized Qashqai (14MY+) diesel EnhancedPowertrain PID support and actuations

Mercedes Benz
• Added A Class (117) model support
• Added E Class (207 / 212) Xenon Headlamp full system support
• Added E Class (207 / 212) Trunk Lid Control system Normalization of Trunk Lid support
• Added S Class (211) Trunk Lid Control system Normalization of Trunk Lid support
• Added SLK Class (171) Tire Pressure Control full system support
• Added CDI61 diesel DME support
• Added ALWR463 / ALWR906 complete support (Includes Zero Position Adjustment)
• Added mBrace full system support
• Added Enhanced Powertrain CDI6LS missing actuations
• Improved G Wagon (463) Gen I complete model support
• Fixed SLK Class (171) Instrument Cluster connectivity issues
• Fixed SL Class (230) Instrument Cluster connectivity issues

Subaru-family
• Added diesel engine support for Legacy

Toyota-family
• Added DPF Rejuvinate PM support for Enhanced Powertrain CAN diesel models
• Improved Enhanced Powertrain CAN diesel version missing sensors and actuations
• Fixed TPWS CAN missing pressure sensors on Toyota of Europe late-models

Giotto Version 14.2.1
---------------------
Ford-family
• Fixed Powerstroke 6.4l EnhancedPowertrain not showing Fuel Pressure Desired

Mercedes Benz
• Added Metris (447) ESP, ORC, SRS, TPM, and other body controllers support

Giotto Version 14.2.0
---------------------
General
• Fixed issue with the WiFi IP Address not being written out to the registry

Audi-family
• Fixed sensor communication issues on newer ASAM Dataset modules
• Fixed an issue when finished performing the Login function hitting the 'Done' button doesn't exit functional test

Chrysler-family
• Fixed issue in module configuration when writing out calculated values
• Fixed WiFi communication issues for SCI-based modules (i.e., SBEC, JTEC, ect...)
• Fixed module configuration writing for CAN-based modules

GM-family
• Added missing Fuel Pressure Control for '05 LLY Duramax
• Added Product Line entry of 'Other' for those vehicles that don't require the Product Line and it's 4/5 VIN is not listed
• Updated VIN decoding to handle Korean Light Truck VINs (i.e. Buick)
• Fixed issue with getting out of sync when pulling DTCs from CAN-based modules
• Fixed Auto Brake Bleed for the Firebird '02
• Fixed issue on some vehicles where we had some missing systems listed as supported (i.e., Chevrolet Equinox '13)
• Fixed issue with clearing the key FOBs on the 'RFA LEAR GMLAN' when trying to program Key FOBs on that module (i.e., Chevrolet Impala '11)

Ferrari / Maserati
• Improved 575M coverage

Fiat
• Added variant module support for Fiat vehicles
• Added special VIN pull from the PCM module

Honda / Acura
• Fixed the last entry being empty in the system test list under the 'Inspection mode' tab
• Fixed sensor scaling for the Short Term Bank 2 sensor for CAN-based engines
• Removed the long wait message when you are pulling codes from All Systems

Jaguar
• Added missing body controllers for New XJ / XJL, XF, and New XK8
• Added more ABS CAN PIDs for New XJ / XJL, XF, and New XK8
• Added ABS CAN actuations for New XJ / XJL, XF, and New XK8

Mazda
• Added RX8 Electronic Power Steering System Test Neutral Position Setting
• Fixed actuations not reporting the error conditions

Mercedes Benz
• Added C Class (205) and S Class (222) ESP, ORC, SRS, TPM, and other body controllers support
• Fixed BMS242 Battery System missing sensors and reporting incorrect Battery Temperature values

Toyota-family
• Added new Hybird Control DTC descriptions from latest Toyota update
• Fixed Enhanced Powertrain on late-models O2S Impedance B1S2 reporting incorrect values

Giotto Version 14.1.2
---------------------
BMW / MINI
• Added X5 '09 - '13 (E70) Electronic Parking Brake system test Set Workshop Mode and Cancel Workshop Mode
• Added X5 xDrive35d '14 - '15 missing N57 DDE engine coverage
• Added 740i '09 - '14 (F01 / F02) missing N54 DME coverage
• Added MINI '15 (F55 / F56) DME complete system coverage (Includes Battery Registration)
• Added more DTC descriptions for late-model engines

Ford-family
• Fixed NOX decimals too far to many places and clipped from 65535 to 1000 as 900 is max
• Fixed '13 - '15 Focus, CMAX, and Transit Connect Remote Function Actuator system not reporting Programmed TIC IDs

Mercedes / SMART
• Added missing '15 C Class support
• Added missing '15 CLS Class support
• Added missing ABR211 and ESP MK25 Road Test support
• Added C Class '11 - '13 ESP Reset Offset Value of Steering Angle support
• Fixed C Class '11 - '13 SRS and OCM not retrieving DTCs in certain models

Nissan / Infiniti
• Added QX80 '14 - '15 4WD full system support
• Added Delta Stroke Sensor support for CAN ABS on Titan and Armada models
• Fixed failing retrieve DTCs from the G37 '09 - '14 Convertible Roof

Giotto Version 14.1.1
---------------------
BMW / MINI
• Added 7 Series '15 missing model support
• Added Z4 '14 - ' 15 missing model support
• Added X5 / X6 '14 - '15 missing N63 TU engine support
• Fixed DME 2 N63 and DME 2 N63TU support for 5.0l models
• Fixed X3 xDrive28i '11 - '12 Battery Registration not working

Chrysler-family
• Added Jeep Cherokee '14 - '15 support
• Added Jeep Renegade '15 support
• Added Chrysler 200 entry for 2012
• Added Transmission Quicklearn for the Variant 24 PCM (i.e. Dodge Cummins '13)
• Fixed missing Wheel Speed Sensor for the CAN-based ABS Variant 5 module (i.e. Jeep Grand Cherokee '05)
• Removed ESM from the 'Anti-Lock Brake' catagory in the Vehicle Selection dialog

Ferrari / Maserati
• Added F12 model support (Includes Service Reset)
• Added LaFerrari model support (Includes Service Reset)
• Added Ghibli model support (Includes Service Reset)
• Added Quattroporte M156 model support (Includes Service Reset)
• Added 360 Modena and 575M Instrument Cluster system support
• Added Airbag TRW full sensor support
• Added 360 Modena and 550 Suspension BOGE full system support
• Added 458 Italia / California full system support:
Infotainment
Steering Wheel System
Driver and Passenger Seat Modules
• Added 458 Italia / California Suspension System missing actuations support
• Added 458 Italia / California Airbag missing sensor support
• Added 599 / Scaglietti full system support:
Adaptive Light Module
Body Computer
Climate Control System
Instrument Cluster (includes Service Reset)
Suspension Module
Driver and Passenger Door Systems
Driver and Passenger Seat Modules
Steering Wheel System
Suspension Module
TPMS
• Added 599 Enhanced Powertrain missing V12 actuations support
• Fixed 575 Skyhook and TPMS Beru support not communicating

GM-family
• Added more Key FOB Programming support (See webpage for specific model support)
• Added TPMS Learn Mode (*See webpage for specific model support)
• Added TPMS Force Write for supported Body Control Modules (See webpage for specific model support)
• Added programming support for Tire Type and Pressure Placard (See webpage for specific model support)
• Added Fuel Composition Reset for the '10 2.2 Liter Engine
• Added Engine actuations for the 4.3 Liter '03 with body code S
• Added Memory Seat Module system for the GMC Yukon / Yukon XL / Yukkon Hybrid for '09
• Added CMP Sensor for the 2.9 Liter '08 engine
• Fixed Engine Speed errors for CKP Relearn test
• Changed engine code for the 5.3 Liter LMF from 5 to 4 for '08 - '09 Light Trucks

Ford-family
• Fixed Fiesta 15MY OCM Passenger Weight Reset not working
• Fixed DTC BCodes missing some entries with last update

Honda / Acura
Added TLX and RLX Hybrid model
Added the following systems:
Anti-Lock Brakes System CAN
Blind Spot Information - Left Side
Blind Spot Information - Right Side
Electronic Parking Brake
Heated Cooled Seat Module
Integrated Driver Assist System
Precision All Wheel Steer System

Hyundai / Kia
• Added HG, LFA, JMA, and CM / DMA late-model full system support:
Assist Door Module
Body Control Module (HG, LFA, JMA, and CM / DMA)
Driver Door Module
Passenger Seat Module
Power Tailgate Module
Smart Junction Box Module
Steering Column Module
Steering Wheel Remote Control
Surround View Monitor System
• Fixed TPMS Sensor IDs not showing last digit on some controllers

Mercedes / SMART
• Added CLA model support
• Added GLA model support
• Finalized M Class (166) model support

Giotto Version 14.0.1
---------------------
General
• Added more Surface Pro 3 / 4 specific user-interface scaling support (we recommend display scaling at 250% for proper viewing)
• Fixed Surface Pro 3 / 4 not saving the last window position or font size

Chrysler-family
• Increased the max value for the Line Pressure sensors for the Dodge Cummins '11

GM-family
• Added Chevrolet Silverado '15 support
• Added Chevrolet Impala '15 engines sizes: 3.6 Liter LFR, 2.4 Liter LUK, and 2.5 Liter LKW
• Added Light Truck Transmission for '12 5.3 Liter LC9 (9)
• Improved communication issues with non-High Speed CAN modules
• Relabeled the Chevrolet Captiva as a Light Truck not as a Passenger vehicle
• Fixed DTC retrieval issue on some '13 - '15 models
• Fixed the graying out of the 'Select All Sensors' when modules only allow single sensor selection

Ford-family
• Fixed Ford SuperDuty 5.4 / 6.2l '11 - '15 system tables

Mercedes / SMART
• Finalized ORC172 and OCM172 DTC descriptions and updated to use English
• Finalized the SLK Class (R172) model coverage

Toyota-family
• Added new Hybrid Control CAN trouble codes recently added by Toyota
• Added Hybrid Control CAN SubCode support for Gen III Prius models
• Fixed Electronic Control Transmission live data support missing some PIDs and actuations
• Fixed Combination Meter CAN AT Indicator actuations
• Fixed TPMS CAN only allowing eight digit identifiers

Giotto Version 14.0
---------------------
General
• Fixed requiring Administrator mode to store Giotto settings
• Fixed USB device being the only selection possible when no J2534 devices are present

Audi / VW-family
• Added model year 2015 support

BMW / MINI
• Added model year 2015 support

Chrysler-family
• Added model year 2015 support
• Added Injector Programming for Variant 17 modules (ie 3.0 Liter Diesel)
• Fixed issues when trying to perform an ORC Initialization
• Fixed Module Configuration System Test for the TIPM Variant 8 module
• Fixed Tire Size programming for BCM Gateway vehicles (i.e. Jeep Grand Cherokee '15)
• Fixed issues where too many sensor being added would crash the software. Sensors are now correctly clipped at 2048 entries

Ferrari / Maserati
• Added complete ICM coverage for Maserati (M139) and (M145), Ferrari 599 / 612 / 458 / California models
• Added complete Parking Brake System coverage for Maserati (M139) and (M145), Ferrari 599 / 612 / 458 / California models
• Added Maserati (M138) TPMS Beru and Suspension Sach Skyhook complete system coverage
• Added Ferrari 458 / 612 / California and Maserati (M139) and (M145) complete system coverage (Requires firmware 45) :
Body Computer
Climate Control
Driver and Passenger Door Systems
Hella Headlamps Leveling
Parking Brake System
Parking System
Steering Assistance
TPMS Beru
• Added Sachs Skyhook Suspension actuations support
• Fixed E-Diff trouble code retrieval and actuation support
• Fixed Ferrari F430 Capote live data not working on some vehicles
• Fixed Maserati (M138) ABS system failing to communicate
• Fixed Airbag TRW and Instrument Cluster connections issues with Maserati (M139) 07 - 12MY (Requires firmware 45)

Ford-family
• Added model year 2015 support
• Added broadcast support for Power Balance with the new ProLine VCI WIFI hardware. As much as twice as fast while reducing the delay significantly
• Fixed Power Balance glitching for new CAN vehicles with old ProLine VCI hardware. Now more stable and faster
• Fixed Powerstroke 6.0l connection issues

GM-family
• Added model year 2015 support
• Added TP and APP Follow Test for VPW-based modules (Wireless Connector only and requires firmware 44+)
• Added CAN-based Broadcasting mode (Wireless Connector only and requires firmware 44+)
Improved Communication Speeds (Enable via Communication Configuration Fast Mode setting)
• Added VPW-based Broadcasting mode (Wireless Connector only and requires firmware 44+)
Some Improved Communication Speeds, but ability to retrieve sensors that require sensors to be broadcasted (i.e., TP and APP sensors) (Enable via Communication Configuration Fast Mode setting)
• Added ATC for the 5.3 Liter LC9 '13
• Added ISO914-2 for OBDII auto detecting for supporting the Saturn L-series models
• Added AIR Pump sensors for the 3.8 Liter L26 (2) '05 - '06 for vehicles with AIR pump
• Fixed sensors reporting 'No Data' for CAN-based modules (i.e., Balance Cylinder Injectors)
• Fixed Misfire Cylinder #1 reporting incorrectly for the 4.2 Liter LL8 '06
• Fixed EVAP Purge/Seal Actuation for the Silverado 5.3 Liter LC9 (3) '07

Honda / Acura
• Added model year 2015 support
• Added VTM-4 and SH_AWD System to all vehicle system lists
• Added new Module ID for Type E/F TPMS modules
• Fixed ABS module communication for the Honda CRV '12

Hyundai / Kia
• Added model year 2015 support
• Fixed airbag trouble description for ES9520-05 version of controller

Jaguar
• Added model year 2015 support

Land Rover
• Added model year 2015 support

Mazda
• Added model year 2015 support

Mercedes Benz
• Added model year 2015 support

Mitsubishi
• Added model year 2015 support

Nissan / Infiniti
• Added model year 2015 support

Subaru
• Added model year 2015 support

Toyota-family
• Added model year 2015 support

Giotto Version 13.3
-------------------
• Added pinch Zoom support for Windows 8 and 10 devices
• Improved Data Logging Playback by now showing a Please Wait dialog while the data is loaded into the Graphs
• Improved Windows 10 compatibility
• Improved high-DPI device support. Note: Giotto is specifically tailored to upscaling of 144DPI (150%) and 196DPI (200%) which is also used on the Surface Pro models.
• Fixed ISO connectivity issues
• Fixed pressing ESC during the Vehicle Selection causing the software to not exit nor continue to connection process

Audi / VW
• Added a message for user to select a VW Routan as a Dodge Caravan as the vehicle is a Rebadged Dodge vehicle

Chrysler-family
• Added Electronic Pedestrian Protection Module to the Chrysler Town and Country '12 - '14
• Cleaned up engine selections for vehicles that are CAN-based
• Fixed Sebring Coup and Convertible vehicle selections

Ford-family
• Added new Mode 6 translations
• Fixed Powerstroke 7.3l PCM not listing Barometric Pressure in kPa

GM-family
• Added EGR sensors and Actuations for California Emissions on the 6.6 Liter LB7 Diesel '02
• Added Fuel Tank Pressure - Volts sensor to the 4.2 Liter (S) engine
• Fixed the spelling of the Buick LeSabre model name

Honda / Acura
• Added more calibration instructions for the SWS Initialization on the SRS CAN-based modules

Hyundai / Kia
• Added diesel engine support for TCI-U2 1.4l and TCI-U2 1.6l
• Improved C'eed '13+ (JD Chassis) full system support to include diesel engines and body controllers

Toyota-family
• Fixed Tundra and Sequoia missing coverage matrix

Giotto Version 13.2.3
---------------------
• Added new FastMode for non-CAN Generic OBDII. Non-CAN data rates are no longer limited to 100ms and can go as fast as the vehicle bus can return the packet.
• Improved Battery Voltage reporting by showing the actual voltage value
• Improved Mode 6 for all non-ISO / KWP2K models
• Fixed VIN decoding when the first three bytes of VIN was padded with zeros
• Fixed Honda model names being listed under the Peugeot make
• Fixed an issue with selecting Vauxhall as the vehicle make

BMW / MINI
• Fixed N42 4 cylinder motor misfire designations not being shown in the DTC description

Chrysler-family
• Fixed SCI Network check for Proline VCI+ connector

Ford-family
• Fixed Ford of Europe Focus '11MY+ Airbag not connecting
• Fixed Ford or Europe Focus CMax '04MY+ system tables
• Fixed Ford or Europe Focus '07MY+ system tables
• Finalized Ford of Europe Fiesta '13MY+ Power Steering Control Module Steering Calibration Reset not working
• Finalized all Ford of Europe Fiesta '13MY+ coverage

GM-family
• Added Fuel Composition Reset for the 3.5 Liter LZE (K) '08 - '11
• Fixed the Particulate Filter Pressure Variance reporting value for the '12 - '13 6.6 Liter (L) engine

Mercedes Benz
• Added M Class (166) / SL Class (231) Reverse Backup Camera (RFK) full system support
• Added B Class (242 / 246) full petrol and diesel model support
• Added B Class (242 / 246) full EV model support (includes Charger, DC-DC, Power Electronics, Thermal Management, and Battery Management System)
• Added retrieving the VIN from the EIS module for non-NA models and EVs

Nissan / Infiniti
• Added Pulsar 14MY+ model support
• Added VIN decoding for EU modeand EV (Leaf and eNV200 models
• Added Electronic Parking Brake Rev 2 full system support (to include AutoActivation, BrakeOperation, BrakeRelease, ClutchSensorReset, FinishBrakePadReplacement, GSensorCalibration, StartBrakePadReplacement)

Toyota-family
• Fixed '10+ EnhancedPowertrain CAN missing Activate Eletric Water Pump, Control EGR Step Position, and Control Fuel Pump
• Fixed ECT CAN missing some PIDs

Giotto Version 13.2.2
---------------------
• Fixed the requirement that you start the software with the Run As Administrator prior to using. Now you will only be required to set this when a new activation code is entered and stored in the Registry.

Giotto Version 13.2.1
---------------------
Audi / VW
• Added more UDS-based modules addresses to the software: Actuator For Exterior Noise, Thermal Management, Battery Charger Control Module, ect.

Chrysler-family
• Fixed issue when performing systems tests on some CAN-based vehicles that cause the tests to prematurely end or not show a list of available tests under the 'System Test' and 'Module Configuration Test' tests

GM-family
• Added Transmission and SIR module for the GMC Sierra '12 body code (2)
• Added Clear TAPS for the 6.6 Liter LMM Allison transmission '09
• Added CKP relearn entry for the VPW-based 2.2 Liter (F) '06 Engine
• Fixed issue with displaying empty Freeze Frame records on VPW-based modules

Mercedes Benz
• Added M Class (166) SAM Front full system support
• Added GLK Class (X204) diesel DME system support
• M Class (166) SAM Front amera full system support
• Improved SLK Class (170) connectivety and coverage

Giotto Version 13.2
---------------------
General
• Fixed software crashing when data logging multi-PID sensors
• Fixed VIN decoding showing the model and year in red after a falied attempt and then a successful retrieval

BMW / MINI
• Added full M4 (F82) model coverage

Chrysler-family
• Added Transmission Quick Learn for the Transmission Variant 41 module
• Removed the setting of the vehicle make when decoding the model via VIN decoding
• Fixed Tire Size Programming on PowerNET-based vehicles (i.e Dodge Cummins '14)

GM-Family
• Added Clear TAPS for '07 6.6 Liter LBZ Engine
• Added Fuel Composition Reset for '09 Light Trucks
• Added 0.3 Amps - 1.0 Amps entries for the PC Solenoid actuation on a '00 4.3 Liter L35 transmission
• Added SIR and PPM for all Chevrolet Colorado models
• Added VPW-system entry for the Chevrolet Colorado SIR and PPM
• Changed the engine code for the 5.3 Liter L83 (C)
• Updated the ALDL support for the VCI / WiFi Connector

Ford-family
• Finalized all 14MY support
• Added Powerstroke 7.3l missing Digital Transmission Range Switch 1 - 4
• Improved actuation handling for initialization or reset commands by no longer requiring the user to uncheck. The software will now automatically show the results and uncheck the box
• Improved Transit Connect '14MY coverage
• Fixed Tire Pressure Monitor on newer models not displaying the last digit of the TPMS RF ID
• Fixed Powerstroke 6.0l Intake Air Temperature 2 support showing the value in C when it is only reported in F

Hyundai / Kia
• Finalized all 14MY support
• Improved data rates for EnhancedPowertrain CAN controllers by a factor of 3
• Improved data rates for Tranmission CAN controllers by a factor of 2

Mitsubishi
• Finalized all i-Miev coverage (added Meter with Reminder Reset)

Mercedes Benz
• Finalized all late-model G Wagon 463 support
• Improved data rates by a factor of 2 on the CAN Engine controllers
• Improved data rates by a factor of 2 on the CAN Transmission controllers

Nissan / Infiniti
• Added Q40 model support
• Improved HVAC for Q70 by only showing the specific subset of sensors instead of the entire list for that controller
• Improved data rates by a factor of 4 on the CAN Engine controllers
• Improved data rates by a factor of 3 on the CAN Transmission controllers
• Improved VIN decoding of the Q50 and Q60 models to discern the Hybrids
• Improved Q50 and Q60 Hybrid controller coverage
• Fixed Power Balance actuation not working for cylinders 4 - 6

Subaru
• Finalized all 14MY
• Added Auto Headlight Leveler CAN and Auto Light and Wiper CAN full system support
• Fixed connections dropping when changing systems or retrieving DTCs

Toyota-family
• Added new Combination Meter CAN DTC descriptions

Giotto Version 13.1.0
---------------------
General
• Added a warning message if the ProLine VCI hardware was connected to the computer after the software was started. The warning will relaunch the application once the hardware is connected
• Added SAAB and Generic OBDII to the list of makes
• Fixed Change Vehicle System (F7) not working in all cases
• Fixed Tab Control toolbar crashing software during software launch if it was previously turned during the software closing
• Fixed default layout of tabs and toolbars not being implemented on first installation
• Fixed file playback on second chart not using the correct scaling for third and fourth plots
• Fixed crashing during file playback
• Fixed IE11 not displaying IM Results reports
• Fixed Generic OBDII missing descriptions for diagnostic trouble codes P007A - P007F

BMW-family
• Added i3 / i3 REX and i8 full EV models support
• Added finalized M235i (F22) '14MY model coverage
• Added finalized X5 (F15) and X6 (F16) '14MY model coverage
• Added missing trouble code descriptions for late models

Chrysler-family
• Added 3.6 Liter for Dodge Caravan '11
• Added Jeep Renegade model
• Added Forward Facing Camera Module and Electric Parking Brake support
• Fixed SBEC / JTEC actuation failures when module has accepted actuation request
• Fixed actuations for the Chrysler Town & Country '02 Body Control Module
• Removed Chrysler 300C and 300M and just made a single Chrysler 300 model entry
• Added Throttle Follow Test and ETC Learn for the PCM Variant 25 module
• Added Throttle Follow Test and ETC Learn for the PCM Variant 26 module

Ferrari / Maserati
• Added Write Clutch Configuration for Gearbox Marelli Rev1 and Rev2
• Added Maserati 4200 (M138) ECM and gearbox support
• Fixed Gearbox Marelli (360 / 430) Self Learning reporting Not Supported yet would complete successfully

Ford-family
• Added Ford Powerstroke 6.7l '11 - '14 Service Functions (SCR and DPF)
• Fixed Ford Powerstroke 6.7l '11 - '14 Fuel Rail Pressure - A and Fuel Rail Pressure - Commanded reading incorrectly
• Fixed Ford Powerstroke 6.7l '11 - '14 Exhaust Gas Temperature B1S3 - Volts not showing in the list
• Fixed Ford Powerstroke 7.3l '95 - '04 MAT - V, MAT, MAP - Hz missing in the sensor list
• Fixed Ford Powerstroke 7.3l '95 - '04 ABS Wheel Speed Sensors missing in the sensor list

GM-family
• Added 3.5 Liter LX9 for '06
• Added secondary CAN address check for the Body Control Module '10 - '11
• Added Air Pump and Air Solenoid actuations for the 3.8 Liter (2) engine
• Improved HVAC Module support for '11 Light Trucks C and K body codes by breaking into two seperate modules (Manual and Automatic)
• Improved auto-detection speeds on some vehicle models
• Removed GMC Sierra 1500 Pickup, Sierra 2500 Pickup, Sierra 3500 Pickup models and added Sierra model
• Removed Chevrolet 1500 Pickup, Chevrolet 2500 Pickup, Chevrolet 3500 Pickup models and added Chevrolet Pickup model
• Renamed the Sierra HD to Sierra HD '14 as that's the only year that model is needed

Honda-family
• Added CAN-based new systems: Electric Servo Brake System and Electric Parking Brake System
• Updated the auto detection process for SWS modules

Hyundai / Kia
• Added SMART Key (SMK) full system support for 2014 models
• Added Blind Spot System full system support for 2014 models
• Added Electronic Parking Brake (EPB) full system support for Cadenza
• Added Cluster Unit (CLU) full system support for 2014 models
• Added EVAP Leakage Test and Reset Adaptive Values for the Optima 2.0L Turbo engine

Isuzu
• Fixed Engine Selection description displaying invalid characters

Land Rover
• Fixed diagnostic trouble codes not retrieving on 11bit CAN controllers on the New Ranger Rover '10 - '14
• Fixed diagnostic trouble codes crashing on HVAC controller on the Evoque '11 - '14

Mazda
• Added SWS Calibration for newer Mazda 3 and Mazda 6 models
• Improved actuation handling for initialization or reset commands by no longer requiring the user to uncheck. The software will now automatically show the results and uncheck the box
• Fixed Transmission Shift Solenoid (3 and 4) - Measured reporting the wrong values for Mazda 6 '14
• Fixed CX5 '12 - '14 Transmission Oil Pressure (1 - 4) Switch missing in the sensor list

Mercedes Benz
• Added AdBlue (SCRM) support for Sprinter '10 - '14 (906)
• Added Weight Sensing System '11 - '14 (ORC172) sensor support
• Added TPMS Write Identification Numbers for SL Class '12 - '14 (231), SLK Class '11 - '14 (R172), M Class '12 - '14 (166), and GL Class '13 - '14 (X166)
• Added Normalize Positioning Of AC Motors, Teach-in of Actuator Motors, and Breaking-in of Refrigerant Compressor for GL Class '13 - '14 (X166)
• Added Reset Offset Value of Signal Steering Angle for E Class '10 - '14 (W212), CLS Class '11 - '14 (W218), SLK Class '11 - '14 (R172)
• Fixed AirMATIC Move To Calibrated Level - Automatic not moving to the set Normal Level for GL Class '13 - '14 (X166)
• Finalized all SLK Class '11 - '14 (R172) coverage

Nissan / Infiniti
• Added warning for latest Airbag controllers to use Self-Test when DTCs are not read from the DTC Read request
• Added BCM to Quick List (TM) for TPMS controllers
• Added missing ABS system to Juke '11 - '14
• Added missing CTV-A and CVT-B sensors to AT CAN (Rev) for Nissan TSB NTB13-079b
• Fixed missing sensors from 4WD CAN (Rev3) system
• Fixed Differential Lock live data and trouble support not working on all models

Toyota-family
• Added Prius PlugIn full model support
• Added Prius Air Bleed - Usual Air Bleed sub-version support
• Added Steering Sensor Initialization for Active Front Steering system
• Fixed Vapor Pressure sensors reporting incorrect scaling on some late-models

Giotto Version 13.0.1
---------------------
General
• Fixed User Guide not loading on 64bit Windows installations
• Fixed broken link to request activation codes in the Feature Activation window
• Fixed plot 3 in Graph 8x and Graph 4x not using the correct y axis

Ferrari / Maserati
• Fixed Maserati M145 '13 - '14 SX and DX EnhancedPowertrain coverage

Ford-family
• Fixed Explorer '11 - '14 missing AWD Clutch Control Module support (both system and the Powertrain bi-directional control All Wheel Drive Clutch Control Commanded)
• Fixed ProLine VCI not retrieving Software or Vehicle ID Block information on older SCP models
• Fixed Ford Powerstroke '96 - '03 ABS system missing the left wheel speed sensor

GM-family
• Added C/K Electronic Brakes for the '13 Light Trucks
• Added Cylinder 7/8 for the '11 6.2 Liter L94 (F) (i.e., GMC Yukon Denali)
• Fixed CMP actuation for the 3.5 Liter (N) Chevrolet Impala '09
• Increased DTC pulling speed on CAN-bus vehicles when modules aren't present

Toyota-family
• Improved all Utility functions to follow the updated Toyota usage instructions
• Improved ABS Air Bleed for Prius '03 - '09 (Gen II) to follow updated process
• Improved ABS Air Bleed for Prius '10 - '14 (Gen III) to follow updated process
• Fixed ABS Air Bleed not working for Prius '10 - '14 (Gen III)
• Fixed Linear Valve Offset Calibration not working for Prius '10 - '14 (Gen III)
• Fixed VIN decoding for Prius '10 - '14 (Gen III)
• Fixed TM Control system not being sorted in the Transmission group in Vehicle Selection

Giotto Version 13.0
---------------------
General
• Added touch-friendly user-interface (larger icons and pinch zoom to name a few)
• Added graphical tool bar to replace the selection tabs
• Added new and improved smart Vehicle Selection process making it faster and touch-friendly
• Added Quick List™ support to categorize engine, transmission, brakes, safety, and TPMS systems making the Vehicle Selection process smarter and faster
• Added support for a Histogram to display correlated data relationships
• Added support in the Live Data Graph to track all the plot values at once in real-time
• Added support in the Live Data Graph to show values as text if it's a Hex- or ASCII-based sensor
• Added two more sensors per graph in the Live Data Graph
• Added support for sensor complex formulas (such as VE or Boost Pressure calculations)
• Added Vertical Marker support in the Live Data Graph to tag live data plots for later recall
• Added support in the Data Logging to write values as text if it's a Hex- or ASCII-based sensor
• Added the ability to check if there is a newer version of the software available and automates updating if necessary
• Added support in the Live Data Graph to change the background color and plot text size
• Added support to show Actuation instructions in a multi-line ToolTip making long instructions easier to read
• Improved graphics to support higher-resolution devices
• Improved VIN decoding to the fastest in the industry by only isolating make-specific VIN retrieval calls

Audi / VW
• Added model year 2014 support
• Added UDS-based Adaptations

BMW / MINI
• Added model year 2014 support

Chrysler / Dodge
• Added model year 2014 support
• Added Radio Frequency Hub for the '13 - '14 Dodge Durango
• Added actuations for the BCM on a Chrysler Sebring '01 - '06
• Added 3.8 Liter engine for the Chrysler Town and Country '10
• Updated the ABS Initalization system test with more instructions

Ferrari
• Added model year 2014 support
• Fixed Clutch Wear showing a negative number for a new / replaced clutch

Fiat
• Added model year 2014 support

Ford-family
• Added model year 2014 support

GM-family
• Added model year 2014 support
• Added Desired Fuel Rail Pressure sensor for the 3.6 Liter LLT engine '09 - '13
• Added engine entry for the Chevrolet Silverado 5.3L K Body '07
• Added engine entries for the Cadillac 6.0 Liter LS2 '06 - '07

Honda / Acura
• Added model year 2014 support

Hyundai / Kia
• Added model year 2014 support

Jaguar
• Added model year 2014 support

Land Rover
• Added model year 2014 support

Mazda
• Added model year 2014 support

Mercedes
• Added model year 2014 support
• Added AIRMATIC GL Class (X166) and SL Class (R231) Level Calibration system test
• Fixed SL Class (231 chassis) system coverage
• Fixed Sprinter (905 chassis) EWM and ESP not having all the trouble code descriptions in the library

Mitsubishi
• Added model year 2014 support

Nissan / Infiniti
• Added model year 2014 support

Subaru
• Added model year 2014 support

Toyota / Lexus / Scion
• Added model year 2014 support

ScanTool Version 12.3
---------------------
General
• Fixed OBDII ScanTool hardware requiring a reboot before the security codes will be accepted

Audi / VW
• Improved KWP2000 protocol handling of broken up response messages
• Changed the first year we detect for UDS-based modules to '03
• Fixed Actuations not starting on some UDS-based modules

BMW / MINI
• Fixed 1 Series '07 connectivity issues

Chrysler / Dodge
• Added Dodge Durango model ('10 - '11) support

Ferrari
• Added Ferrari 575 engine DX and SX coverage
• Added Ferrari 599 and 612 complete Instrument Cluster support (including SIR Reset)
• Added Ferrari 599 and 612 complete airbag support
• Added Maserati Gran Turismo and Quartroporte complete Instrument Cluster support (including SIR Reset)
• Added Maserati Gran Turismo and Quartroporte complete Airbag TRW CAN support
• Added Maserati Gran Turismo and Quartroporte complete Sachs Skyhook suspension support
• Added Maserati Gran Turismo and Quartroporte partial Gearbox Automatic support
• Fixed Ferrari 599 and 612 EnhancedPowertrain DX / SX Lambda voltages reporting incorrectly
• Fixed Ferrari 360 EnhancedPowertrain DX / SX Exhaust Camshaft Timing Angle limited to 90 degree for a maximum value

GM-family
• Added missing Air Pressure - Volts sensors for the Pontiac 3.8L '07

Mazda
• Added CX-5, Mazda 3, Mazda 6 '13 - '14 DC-DC system support
• Added Tribute '08 - '11 Configure Steering Angle Sensor system test
• Improved CX-7 '07 - '10 coverage
• Fixed CX-5, Mazda 3, Mazda 6 '13 - '14 some Active Front Steering and Battery Control Module sensor support

Mercedes
• Added Enhanced Powertrain diesel CDI D2 system coverage for the Sprinter 906 models ('12 - '14)
• Added Enhanced Powertrain diesel CDI D3 system coverage for the C / E class models
• Added missing Upper Control Panel (UCP) sensors for the Sprinter 906 / Viano 639 models
• Added missing Electric Ignition Switch (EZS) sensors for the Sprinter 906 / Viano 639 models
• Added missing Supplemental Restraint System (SRS) sensors for the Sprinter 906 / Viano 639 models
• Added missing Overhead Control Panel (OCP) sensors for the Viano 639 models
• Added S Class '11 - '13 (W221) missing diesel engine support
• Improved VIN decoding
• Improved DTC descriptions by translating more into English from German
• Fixed Electric Ignition Switch (EZS) connection issues with Sprinter 906 Viano 639 models
• Fixed Supplemental Restraint System (SRS) sensors show No Data because of failing to unlock the controller on Vito / Viano 639 models
• Fixed SLK Class '12 - '14 (R172) Vario Roof (CRCM) DTCs not have descriptions
• Fixed diesel engine decoding during connection. In case where ECU variant is unknown the base variant will be used
• Fixed E Class '10 - '14 (212) SAMF and SAMR DTCs not have descriptions

Nissan / Infiniti
• Added 14MY Juke, Qashqai, and Note full model support
• Added '11 - '14 Enhanced Powertrain Diesel CAN Work Support (Engine Adaptives, EGR Valve Programming, DPF Relative Pressure Sensor, Exhaust Fuel Injector Circuit, Air Damper Valve Programming, CC/SL Program, E/O CC/SL Program, Fuel Supply Prev, Volume Control Valve Learning)

Toyota-family
• Added missing 14MY for Toyota-of-Europe coverage
• Added AutomaticHeadlightLeveling system support

ScanTool Version 12.2.1
-----------------------
Audi / VW
• Improved switching between CANTP2.0-based and UDS-based module communication

BMW / MINI
• Removed the need to select a Start Test prior to any Heating and AC (IHKA) E8x and E9x actuation

Chrysler-family
• Added Dodge Dart '13 (NOTE: Requires Proline VCI Connector)
• Added message when actuations fail to be accepted by the module on SCI-based modules
• Fixed issue when software would hang during sensor auto detecting for CAN-based module

GM-family
• Added CKP Relearn for 5.7L '05 and 3.5L '06
• Fixed Steering Wheel Position sensor for the Chevrolet Corvette '09-'12 in the EBCM
• Fixed Enhanced Powertrain connection for '01 8.1 Liter 5-Speed vehicle

Honda / Acura
Added new DTC descriptions for Engine, Transmission and ABS Type 1/4 modules

Mercedes
• Improved late-model VIN decoding

Mitsubishi
• Fixed i-Miev crashing during system selection

ScanTool Version 12.2
-----------------------
General
• Added complete support for higher-resolution DPI devices
• Added link in Technical Support menu item for downloading TeamViewer software
• Fixed J2534 CAN not allowing a flow control message with some hardware devices
• Fixed J2534 VPW having the wrong source address
• Fixed J2534 ISO / KPW timing issues
• Fixed CAL and CVN reporting on newer CAN controllers that report multi numbers

Audi-family
• Added support for multi-byte sized responses for CAN TP2.0
• Fixed the reporting of the DTC count when pulling codes from UDS-based modules

BMW / MINI
• Added X3 xDrive35i '13 DME support
• Added X3 '11 - '13 (F25) EPS Steering Angle Initialization support
• Added MINI '07 - '14 Electric Power Steering controller EPS Learn / PSC Adjustment support
• Added E6X '11 - '13 (F10 / F11) SZL Steering Angle Calibration support
• Fixed M3 (E9x) Manual Transmission Oil Drain actuation
• Fixed M3 (E9x) not showing Rear Brake in Condition Based Service system test
• Fixed Reset Oil Life Counter for EGS6HP
• Removed the need to select a Start Test prior to any Heating and AC (IHKA) E6x actuation

Chrysler-family
• Added model entries for the Chrysler Grand Voyager for '96 - '99
• Added system module information for '12 LX Body code vehicle (i.e., Chrysler 300C)
• Added more Axle Ratios for tire size programming for CAN-based vehicles
• Added supported for ABS variant 4 version 04 actuations
• Fixed Jeep Wrangler '05 45RFE transmission module reporting sensor data

Ford-family
• Fixed Ford Fusion '10 - '12 2.0L and 2.5L engines not working
• Fixed Ford Explorer / Lincoln Aviator '06 - '09 Transmission Temp Sensor reporting incorrectly

Ferrari
• Added full 458 Italia / California engine, gearbox, suspension, airbag, instrument cluster, TPMS, and parking sensor
• Added 458 Italia / California ABS Steering Angle Calibration system function
• Added missing 360 and F430 Airbag trouble code descriptions
• Added missing 360 and F430 Suspension trouble code descriptions

GM-family
• Added Reduction Actuations and Resets for the Duramax 6.6 Liter LML Diesel '11+
• Added missing Cylinders for the Fuel Injector Balance and Cylinder Power Balance actuations for '07 6.0L Diesel engines
• Fixed the Reduction Fuel System Test for the Duramax 6.6 Liter LML Diesel '11
• Updated SRS module for the Chevrolet Silverado '12

Honda/Acura
• Added the reporting Honda DTC Code with the SAE code for IMA Motor Module (i.e. Honda Insight '00)
• Added a message displaying if the ABS / SRS module has rejected the request to clear the DTC codes
• Updated DTC descriptions for ABS Type 1 and Electronic Steering Modules

Hyundai / Kia
• Added Santa Fe 2.0L Turbo model support
• Added Active Hydraulic Booster system PID Bar / PSI sensors reporting incorrect values
• Added Improved Tucson '10 - '13MY TPMS sensor coverage
• Added Cadenza model support
• Fixed Veloster Turbo '13 Engine tables

Jaguar
• Added DTC descriptions for missing B Codes on the New XJ
• Added Rear Tailgate Module support for New XJ
• Added missing Tire Pressure Monitor sensors to Body Control Module on New XJ models
• Fixed Electronic Parking Brake Module not connecting on New XJ models

Land Rover
• Added Rear Tailgate Module support for Evoque

Mercedes
• Added C Class 13MY support
• Added M Class (166) missing DTC descriptions for several controllers
• Added M Class (166) Tire Pressure Monitor full system support
• Added M Class (166) Denormalization And Normalization Of Liftgate Control
• Added M Class (166) Teach-In Anti Pinch Protection for Sliding Roof control
• Fixed SBC Activation and Deactivation on the '04 - '05 SL not working with ProLine VCI hardware (firmware update 41 required)
• Fixed Electronic Shift Module for C Class (204) DTCs not having descriptions

Subaru
• Fixed ABS VDC not reporting codes as Detailed Code and resolved clearing on same
• Fixed 2013MY not working on some models

Toyota-family
• Added GX460 '08 - '13 model support
• Fixed Headlight Auto Leveling not connecting on certain models

ScanTool Version 12.1.1
-----------------------
GM-family
• Added Injector Programming for 6.6 Liter LML and 6.6 Liter LGH engines
• Removed the K engine code for the 6.0 Liter L76 as only the Y engine code exists

Mazda
• Added CX5 '12 - '13 Smart Start Unit full system support
• Added CX5 and Mazda3 '12 - '13 Front Body Control Module and Rear Body Control Module full system support
• Added CX5 and CX9 '12 - '13 Driver Door Module full system support
• Added CX5 '12 - '13 TPMS Reset to ABS controller

Nissan / Infiniti
• Added Nissan Leaf 13MY Brake Rev 2 CAN Stroke Sensor Zero Point Learning
• Fixed Nissan Leaf 13MY EV HEV CAN not retrieving or clearing DTCs
• Fixed Nissan Leaf 13MY Shift CAN not communicating
• Fixed Nissan Leaf 13MY Charger CAN Quick Charger actuation not toggling On and Off

Toyota-family
• Fixed Prius Plug-In not in the vehicle model listing and other models tables of coverage not correct

ScanTool Version 12.1
-----------------------
Audi / VW
• Added 10k more DTC descriptions
• Added UDS ASAM Dataset Sensors, Actuations, and System Test Support
• Added alternate retrieval of Gateway module list information on CANP2.0 Getaway modules
• Added retrieving the CAN Gateway module list if one is present when clearing DTCs to speed up clearing DTCs from all systems
• Fixed problem with reporting of modules not present when pulling DTCs from all modules for CAN TP2.0 modules
• Fixed issue with sensor names being updated when they are already provided

BMW / MINI
• Added missing 7 Series 09 - 13 (F01 F02 F03) Tire Pressure Monitor sensors
• Added missing 7 Series 09 - 12 (F01 F02 F03) with N63 Battery Registration Reset
• Fixed LCM for E38 not supporting large actuations. The actuation list is now complete

Chrysler-family
• Added Dodge Dart '13 (NOTE: System Tests not supported at this time)
• Added Current CKP, CMP, and Sync State sensors for the '01 - '03 SBEC module
• Added Current DIS Signal sensor for the '01 - '03 SBEC module
• Added Network detection for the 'Retrieve Installed Module VINs' system test
• Added PCM Variant 24 for '13 Dodge RAM vehicles
• Fixed communication issues on non-CAN Cummins vehicles
• Fixed DTC retrieval problems on SCI-based vehicles

Ford-family
• Added Powerstroke 11 - 14MY Enhanced Powertrain missing Water In Fuel sensors
• Added new Mode $06 entries for latest TID and CIDs
• Fixed Escape 13MY ABS Steering Wheel Calibration not working
• Fixed Fiesta 11 - 13MY Power Steering Control Module PDC Reset not working
• Fixed Taurus and CMAX Energi 13MY OSCM Passenger Weight Reset not working
• Fixed CMAX Energi 13MY Battery Energy Control Module Fan Speed Demanded actuation not working
• Fixed Enhanced Powertrain CAN Equivalence Ratio Lambda sensors maximum value set too low
• Fixed Powerstroke 11 - 14MY Transfer Case Control Module not communicating in some conditions and missing actuations

GM-family
• Added missing Module ID sensors for body controllers '08 - '12
• Added Power Steering Module for the Chevrolet Malibu '10 - '11
• Added Magna Steer system for the Buick passenger C body '01 - '04
• Added Cylinder 7 and 8 to the Fuel Injector Balance actuation for the Chevrolet Silverado 5.3L '10
• Added special CAN VIN pull for trucks that seem to only support responses from GM specific VIN locations
• Added missing sensors when retrieving enhanced Freeze Frame from CAN-based modules
• Added VPW-based SIR module for the Chevrolet Corvette '09 - '12
• Added VPW-based Passenger Presence module for the Chevrolet Corvette '08 - '11
• Added the pulling of the All Groups for DTCs on a Chevrolet Aveo '07 SIR module
• Resolved issue with having to select Chevrolet Classic instead of Chevrolet Malibu
• Fixed Fuel Tank Pressure sensor for the Chevrolet Impala 3.8L '03
• Fixed duplicate sensors for '97 Passenger Vehicles in Enhanced Powertrain
• Fixed ABS actuations for the Pontiac Montana '09
• Fixed EVAP Vent Solenoid for the Chevrolet S10 '01 4.3L
• Fixed Misfire Cylinder 1 reporting as Cylinder 2 for '03 - '04 3.4L Passenger vehicles
• Fixed SIR DTC retrieval for the Chevrolet Aveo '07

Honda / Acura
• Added new module ID for SRS11 module
• Added the following new CAN-based systems for MY13 coverage: SRS System, Seat Weight Sensors,
Front Camera Module, TPMS System, METER, E-Pretensioner, and ACC & CMBS/FCW System
• Added testing for CVT Transmission on vehicles that originally had the normal Automatic Transmission
• Added new Transmission address for '13 vehicle (ie Acura TSX)
• Fixed reporting DTC descriptions when pulling code from Generic Powertrain while in Enhanced Powertrain
• Removed the OPDS module from the system drop down for the '13 Honda Accord and Civic as well as for the
'12+ Honda CRV since the new SRS module installed now longer has the OPDS module installed
• Changed the SWS system name to Seat Weight Sensor
• Changed IMA system names to E-Drive per updated Honda specs

Mitsubishi
• Fixed ABS / ASC / ASTC Steering Angle Sensor Calibration and All G Sensor Calibration reporting failure even if successful

Nissan / Infiniti
• Added CVT Transmission Erase Learning Value system test support
• Added support to show the Past / Historical codes in blue to follow software design of red for current and blue for Past / Historical
• Added VSP full system support for hybrid vehicles
• Fixed Infiniti not being decoded as a make during VIN decoding
• Fixed Airbag Rev 2 ECU Part Number failing intermittently

Subaru
• Added CrossTrek model support
• Added first-generation Power Steering for '04 - '14
• Added second-generation Power Steering for '13 - '14

Toyota-family
• Added Prius PlugIn model support
• Fixed Sienna 2008 Airbag support not working

ScanTool Version 12.0.0
-----------------------
Audi / VW
• Added MY13 support
• Fixed message when exiting Basic Setting Tests that 'test completed successfully' not that the 'test was interrupted by user'
• Fixed loss of communication when switching between CANTP2.0 and UDS based modules when pulling DTCs from all systems along with Firmware 40

BMW / MINI
• Added MY13 support
• Added Driver and Passenger Seat Normalization system test for Fx0 chassis'
• Added Steering Angle Calibration system test for Fx0 chassis'
• Added Condition Based Service display and reset support for Fx0 chassis'
• Fixed Steering Angle Calibration on MINI R60 / R61
• Fixed late-model CAN vehicles not reporting live data when Generic OBDII is selected as the System selection
• Fixed late-model CAN vehicles not decoding VINs

Chrysler-family
• Added MY13 support
• Dodge Dart not supported at this time
• Fixed the max sensor range for the CAN-based Cummins:
• Fuel Pressure Sensor
• Fuel Pressure Setpoint
• Fixed communication problems for VPW-based system tests on NGC modules
• Fixed problem pulling VIN for VPW-based NGC modules
• Improved communication speed on CAN-based modules with Firmware 40

Fiat
• Added MY13 support
• Improved communication speed on CAN-based modules with Firmware 40

Ford-family
• Added MY13 support
• Added System Test support for J2534 hardware: PCM (Outputs ON / Off, KAM Reset, KOEO, KOER, CAN PowerBalance), Airbag (PassengerSeatWeightSensorReZeroFunc)

GM-family
• Added MY13 support
• Fixed Misfire Cylinder 2 reporting on '98 4.3/5.7 Liter
• Fixed Missing Enhanced Freeze Frame data due to modules taking longer to respond

Honda / Acura
• Added MY13 support
• Added Active Damper System to the Acura MDX '08
• Improved communication speed on CAN-based modules with Firmware 40
• Fixed software freezing when pulling DTCs from All systems with Bosch ABS controllers

Hyundai / Kia
• Added MY13 support

Jaguar
• Added MY13 support
• Added Impact Classification Module support

Land Rover
• Added MY13 support

Mazda
• Added MY13 support

Mercedes
• Added MY13 support
• Added SLK 11MY+ (172) Instrument Cluster (IC) support (to include Service B Reset)
• Added SLK 11MY+ (172) Air Conditioning support (AAC) (to include Normalization of Actuator Motors, MotorTeach In Motor Position, AC Compressor BreakIn)
• Fixed Parktronic (172 / 212) not reporting trouble code descrptions

Mitsubishi
• Added MY13 support
• Fixed EnhancedPowertrain showing AC controller sensor list for late-model vehicles

Nissan / Infiniti
• Added MY13 support

Subaru
• Added MY13 support

Toyota-family
• Added MY13 support

ScanTool Version 11.2.2
-----------------------
General
• Fixed MIL graphic not displaying when illuminated on the vehicle

BMW / MINI
• Added N55 DME full system support for F10 / F11
• Improved DTC library for all DDE 6.0 engines

Chrysler-family
• Added Caravan entry for '09-'12 for those Grand Caravan's that show up as Caravan
• Added Contribution Cylinder Test for the CM845 modules with more instructions on engine support
• Added Fuel Override Pressure Test for the CM845 modules with more instructions on engine support
• Fixed intermittent actuation failure for CAN-based modules

GM-family
• Added engine support for the 6.6 Liter LGH (L) '10
• Added NOx actuation commands for the 6.6 Liter LGH (L) '11
• Added Reductant actuation commands for the 6.6 Liter LGH (L) '11
• Added support for the CKP Relearn for 4.6 Liter passenger vehicles from '00 - '06
• Added SIR for passenger Y body Cadillac '04
• Fixed actuations on a Chevrolet Tahoe '07
• Fixed the Engine Code for the 4.6 Liter L37 & 4.6 Liter LD8 '05 - '07
• Fixed intermittent actuation failure for CAN-based modules
• Fixed the sensors scaling and range of the FRP Regulator Command & Desired FRP Regulator on the 6.6 Liter LBZ (D)
• Fixed the sensors scaling and range of the FRP Regulator Command & Desired FRP Regulator on the 6.6 Liter LLY (2)

Honda/Acura
• Fixed intermittent actuation failure for CAN-based modules

Toyota / Lexus / Scion
• Improved VIN decoding for select models after 2010

ScanTool Version 11.2.1
-----------------------
General
• Fixed Proline connectors not resetting when software is restarted

BMW / MINI
• Added M5 12MY (F10) model support. Support includes new TransmissionDKG, ConvertibleTopModule, CrashSafetyModule, ServotronicModule system support
• Added 6 Series and M6 12MY (F12 / F13) model support. Support includes new TransmissionDKG, ConvertibleTopModule, CrashSafetyModule, ServotronicModule systems support
• Finalized X3 12MY (F25) model support. Support includes DME N20, RearLid systems support

Chrysler-family
• Added ABS support for ABS Type 5 Variant 54 module

GM-Family
• Fixed ABS Brake Bleed for the '07 Chevrolet Corvette

ScanTool Version 11.2
-----------------------
Audi / VW
• Fixed incorrect engine DTC description reporting CAN-based models

BMW / MINI
• Added DDE 5.0 M47 / M57 diesel special function support:
Air Mass Flow Calibration
Reset Quantity Mean Value Adaptation
Reset EGR Calibration to Zero
Reset Injection Rate Reset Calibration To 100 Percent
Reset Consumption Calculation Reset To Calibration To Neutral
Request Particulate Filter Regeneration and Replace of Particulate Filter
• Added DDE 6.0 N57 and DDE 7.0 N57 / N47 diesel special function support:
Reset Hot Air Film Mass Sensor
Reset Exhaust Back Pressure Sensor before Turbocharger
Reset EGR Valve
Reset Rail Pressure Regulating Valve Adaptation
Reset Radiator Shutter Variant
Reset Electric Fuel Pump Adaptations
Reset EGR Valve Adaptations
• Added missing 318d (E90) model support
• Added X3 10 - 13 (F25) ASCM and IHKA full system support
• Added missing X6 xDrive3.0d, xDrive3.5d, and xDrive4.0d (E71) model support
• Added Replacement Battery Registration to DDE (diesel) models
• Fixed Airbag ZAE controllers (early 96 - 99MY) not retrieving trouble codes in some cases
• Fixed Retrieve DTCs 'All' selection not working
• Fixed actuations showing a completion message twice
• Fixed DDE 6.0 M57 / N57 Intake Air Temperature reporting incorrect value
• Improved Conditional Based Service displaying of service information by allowing for controllers to take longer to respond

Chrysler-family
• Added 'Key-On Engine Running' instructions for the ESIM system test for CAN-based modules
• Added 'Key-On Engine OFF' instructions for the Fan actuation for CM845 and CM848 Cummins
• Removed Contribution Test from the Cummins CM845 module '03 - '04 as the module does not actually fully support the test
• Fixed missing body codes for Dodge Charger '08 not allow selection of engine
• Changed the maximum sensor value for Cylinder Contribution test to 255 for CM845 and CM848 Cummins

GM-family
• Added engine entry for the Cadillac CTS '04 5.7 Liter
• Added missing bitmap and state sensors for '00 - '05 C/K Truck Body Modules
• Added missing bitmap and state sensors for '00 - '05 S/T Truck Body Modules
• Added missing EGR sensors for the Silverado 5.7 Liter
• Added Injector 6 for the Fuel Injector Balance command for the '06 4.2 Liter LL8 (S)
• Improved performance on CAN-based modules that don't allow you to select all sensors
• Fixed Fuel Tank Pressure scaling issue for the Silverado '07 and the Lacrosse '10
• Fixed missing freeze frame information being pulled from VPW-based engines

Honda / Acura
• Added ABS support for the Acura TL '98
• Fixed the labeling of SRS codes that are pulled as history, but were labeled as current
• Fixed not completing retrieving DTCs from Acura MDX '09

Jaguar
• Added XF 10MY+ diesel support (includes Oil Service Reset, Force Particulate Filter Regeneration, and Particulate Filter Replacement)

Nissan / Infiniti
• Added support for CAN ABS (EU Version)
• Added support for diesel CAN models (Juke, Micra, Navara, NV, Pathfinder, QashQai, XTerra)
• Added PTC Heater CAN full system support
• Improved European model coverage support

Toyota / Lexus / Scion
• Added support for reading the exact PID list from the vehicle using the newer initialization methom
• Added Toyota of Europe Auris HV model support
• Added Charging Control CAN full system support
• Added 4WD Drive CAN Reset Memory and 4WD Control Prevention Mode system tests support
• Improved actuation lists for CAN-based models. The actuation list, command names, and descriptions are set to be exact with the TechStrea
• Fixed Occupant Classification Zero Calibration not working

ScanTool Version 11.1.4
-----------------------
Ford-family
• Fixed retrieving "All" DTCs losing the protocol for the current control so live data and bidirectional controls fail to work after the DTC retrieval

ScanTool Version 11.1.2
-----------------------
General
• Added support to report SubTypes with DTC reports
• Added support for 96-DPI screens being used on newer Windows devices

Audi / VW / Seat / Skoda
• Added battery registration

Chrysler-family
• Added ABS Variant 7 system tests
• Fixed issue during the Cylinder Contribution Test were the test values where showing 'NO DATA' went in fact data had been retrieved
• Fixed Cylinder Contribution and Fuel Pressure Overide tests for the CM845 and CM848 Cummins
• Fixed issue when UDS-based modules send multiple system busy response when request DTC count

Land Rover
• Fixed Ranger Rover 05MY not connecting Generic OBDII because the software didn't try the ISO protocol

Mercedes Benz
• Fixed M Class 12MY+ (166) SRS trouble codes not reading if controller has too many codes present

ScanTool Version 11.1.1
-----------------------
General
• ProLine VCI can connect to ISO vehicles that require 7 and 15 for the initialiation. This was disabled with previous ProLine units due to potential for damage
• Fixed VIN retrieval for CAN-based models when using J2534 diagnostics hardware

Audi / VW / Seat / Skoda
• Fixed issue with performing adaptation savings on CANTP2.0-based modules

BMW / MINI
• Added X3 (F25) Vario Transfer Box (VTG) support
• Added X3 (F25) Electronic Parking Brake (EMF) Startup system test support
• Fixed communication issue with ProLine VCI and newer BMWs

Chrysler-family
• Added Chrysler transmission system to the '98 - '99 Cummins
• Added vehicle rebadged message for more information when selecting Crossfire to select same year as a Mercades SLK

Ford-family
• Fixed DC DC Converter missing sensors
• Fixed Powerstroke 6.0l Injector Pressure Control actuation not allowing 100%
• Fixed Powerstroke 6.7l Average Distance Between DPF Regenerations, Reductant Fuel Level, EGR Throttle Plate Measured, and Turbocharger Wastegate Percentage sensors

GM-family
• Added Injector 6 & 7 to the Fuel Injector Balance test for 5.0 Liter '96 - '97
• Added Transmission entry for the Saturn 2.2 Liter L61 (F) CVT '03 - '04
• Added TFP-B and TFP-C sensors to the transmission for the Saturn Aura 3.5 Liter LZ4 (N) '07
• Added Brake Pedal Position Sensor Learn in the BCM for the Chevrolet Malibu Hybrid '09
• Added MAP sensor to the Duramax 6.6L '06
• Added missing sensors for body control modules for '00 - '04 W Body Chevrolet/Buick passenger vehicles
• Added missing sensors for body control modules for '00 - '03 W Body Pontiac passenger vehicles
• Fixed ALDL communication issue
• Fixed Brake Bleed for Chevrolet Corvette '07 - '08

Hyundai / Kia
• Fixed ASP Calibration for Rio 12MY

Jaguar
• Improved XF 12MY+ sensor support for most controllers
• Fixed Parking Brake Release To Service Position for XF 10MY+ not working

Land Rover
• Added Service Interval Reset for Ranger Rover and Ranger Rover Sport '10 - '12
• Added Longitudinal Sensor Calibration and Drive Parking Brake (Unjam, Mounting, and Latching ) Position for Ranger Rover and Ranger Rover Sport '10 - '12

Mitsubishi
• Added iMIEV full model support

Nissan / Infiniti
• Added Deceleration G Sensor Calibration for Frontier late-models
• Added Active Pedal CAN full system support
• Added QX56 Air Leveler Standard Height Adjust, Clear Height INI, and Adjust Height INI system tests
• Improved vehicle selection time by several seconds

Toyota / Lexus / Scion
• Fixed connection issue with older VPW-based Toyota models (Supra, etc.)
• Added Water Pump and Oil Pump for non-Prius HV ECU CAN system

ScanTool Version 11.1
---------------------
General
• Added support to stop connection process if the Escape key is pressed

Aston Martin
• Added DB9 '11 Enhanced Powertrain support
• Added DB9 '07 - '11 Park Aid full system support

Audi / VW / Seat / Skoda
• Added 5k new DTC descriptions

BMW / MINI
• Added missing DTC descriptions for KBM and VTG systems
• Added Z4 (E85) Satellite Door Left and Right full system support
• Added Z4 (E85) IHKA full system support
• Added M5 '11 - '12 (F10) model support
• Fixed M5 '04 - '10 (E60) Battery Registration not being shown

Chrysler-family
• Added '01 - '03 Cummins Transmission (Requires ProLine VCI hardware)
• Added VIN Coding for SCI-based NGC and SBEC/JTEC Engine controllers
• Fixed issue with actuations prematurely turning off on SCI-based NGC modules
• Improved J1850 VPW module detection

Fiat
• Added Fiat NA coverage (Requires ProLine VCI hardware)

Ford-family
• Fixed DC DC Converter missing sensors
• Fixed Edge '11 - '12 ABS actuations not working
• Fixed PATS key programming for CAN-based models
• Fixed Ford of Europe Fusion tables missing from software
• Finalized all the 12MY support

GM-family
• Added ABS system support for the Chevrolet Lumina W Body '01 - '03
• Added CAN-based ABS for the Pontiac GTO '04 - '06
• Added ALDL-based SIR, PIM, and BCM systems for the Pontiac GTO '04 - '06 (Requires ProLine VCI hardware)
• Added '03 - '09 KWP-based systems for: ABS, Airbags, Engine, and Transmission (See webpage for exact coverage)
• Added '98 - '01 1.3 Liter LY8 (2) Engine module
• Added SDM Part Number Setup and Setup SDM for Common Arc / AutoLiv SIR modules (See webpage for exact vehicle coverage)
• Fixed pulling multiple DTCs for the KWP2000 Cadillac CTS '03
• Fixed issue with Crank Relearn not showing up on some engines (i.e. Chevrolet Malibu 3.1 Liter '01)
• Fixed engine and transmission communication and sensor data for the Saturn Vue 3.5 Liter L65 (4) '04 - '07
• Fixed ABS sensors for the Chevrolet Corvette '09 - '12
• Fixed missing body controllers for GMC Envoy S/T Body '03
• Fixed missing transmission for Cadillac SLS '05
• Fixed the engine code for the '08 2.2 Liter L61 (F) to be (D)
• Fixed Chevrolet Corvette '07 - '08 Fuel Pump Actuation
• Fixed Chevrolet Corvette '07 - '08 ABS Actuations

Hyundai / Kia
• Added 4WD CAN Clutch Learning Reset, Clutch Learning Read, and Clutch Learning Write system tests
• Added Azera 12MY model support
• Added warning for PODS Reset failure to instead check that the WCS system has a WCS Reset
• Added warning for Steering Angle Sensor Calibration failure to instead check that the EPS system has a ASP Calibration
• Fixed PODS Reset not working for the Accent '12 - '13

Mercedes
• Added CLS Class '11 - '12 support

Nissan / Infiniti
• Added Trouble Diagnostic Record late-model Airbag CAN systems
• Fixed the Intake Valve Timing Bank 2 missing from the 3.5L engines
• Fixed HV Battery EV Battery Temperature 1 - 4 report 40 degrees higher then the actual value

Toyota-family
• Added Headlight Auto Leveling complete system support
• Added Blind Spot Monitoring complete system support
• Added Remote Engine Starter CAN complete system support
• Added Lane Keeping Assist CAN complete system support
• Added EMPS CAN and VGRS CAN Signal Check system test support
• Added ECT CAN AT Code Reset system test support
• Added Highlander HV '11 - '12 model support
• Added Rav4 EV '98 - '03 Battery complete system support
• Added Prius C 12MY model support
• Added Prius V 12MY model support
• Added Hybrid Control CAN (CT200h and Prius C / V) Check Mode and Initialization system test support

ScanTool Version 11.0.1
-----------------------
Audi / VW
• Added support to allow the user to enter channel 000 for Basic Settings
• Added CAN-bus recovery for UDS modules when CANTP2.0 response with CAN-Bus Error

BMW / MINI
• Added hundreds of missing DTC descriptions for E36, E39, E46, E6x, E7x, E8x, E9x, and F series models
• Added E60/E61 LM2 AHL2 full system support
• Added E60/E61 Window Initialization (See Body Gateway Module - KBM)
• Added E60/E61 Switch On Compressor Break-In Protection actuation support in IHKA
• Added E8x/E9x Window Initialization System Test
• Added Heating and AC (IHKA) missing flap motor actuations for E46 models
• Added Convertible Top Module (CVM) full system support for the MINI '01 - '08
• Added Transmission ZF 6HP (EGS) full system support for the MINI '01 - '08
• Added Electrohydraulic Power Steering (EHPS) full system support for the MINI '01 - '08
• Added Automatic Heating and AC (IHKA) full system support for the MINI '01 - '08
• Added missing Instrument Cluster (KOMBI) sensor support for the MINI '01 - '08
• Fixed MK60 actuations not setting up correctly on some models with the new ProLine hardware
• Fixed MK20 actuations not setting up correctly on some models with the new ProLine hardware
• Fixed Steering Column Module (SZM) sensors not working on the E46 models

Chrysler-family
• Added automatic ECM detection for Dodge Cummins '01 - '05 for the CM551, CM845, and CM848
• Added Learn ETC System Test for the CAN-based PCM Variant 9 module. (i.e., Dodge Viper '08)
• Fixed UDS-based ABS Inlet, Outlet, and Pump actuations (i.e., Dodge Challenger '12)
• Improved communication for VPW-based NGC PCM controllers (i.e., Chrysler 300 '04)

Ford-family
• Added Lincoln MKS 12MY support

GM-family
• Added Automatic Transfer Case (ATC) module for the 3.5 Liter (T) '05
• Added the engine code for the 6.6 Liter LGH to 6.6 Liter LGH (L)
• Added 4.3 Liter LU3 (X) S/T engine support for the '03 trucks
• Added 6.0 Liter LU8 (G) CNG engine support for the '11' - '12
• Added Fuel Injector Balance for VPW-based modules
• Fixed the engine code for the 4.8 Liter L20 from (C) to (A)
• Fixed issue with failing to pull APP on some CAN-based PCM modules (i.e., Chevrolet Malibu '06)
• Fixed Fuel Pressure reporting incorrect values on the Chevrolet Corvette '08
• Fixed a communication issue when pulling trouble codes from some KWP2000-based modules

Honda / Acura
• Fixed connection issues with older ABS Modules
• Fixed connection issues with older Engine modules
• Fixed decoding error of history codes for SRS94, SRS96, and SRS99 modules

ScanTool Version 11.0
---------------------
General
• Added Windows 8 support
• Fixed tabs and Actuation tab from not allowing font and font size changes
• Fixed Freeze Frame not working on ProLine connectors on older ISO vehicles
• Changed if "Non-OBDII Only" is set as the Vehicle Initialization Type, the O2 and OnBoard Test Results tabs will be hidden until OBDII is re-enabled

Audi / VW
• Added 12MY enhanced coverage
• Fixed issue with software crashing when loading sensor groups for Audi A4 '01

BMW / MINI
• Added 12MY enhanced coverage
• Added X1 xDrive and sDrive diesel and petrol model support
• Added 128i N52 DME full system support
• Fixed CBS Oil Service Reset for 520i - 535i '04 - '07
• Finalized X5 xDrive50 controller support

Chrysler-family
• Added 12MY enhanced coverage
• Added Transmission support for the Dodge Durango '03
• Added ABS Initalize ECU system test for CAN-based vehicles
• Added UDS-based system configuration:
• Auto Door Locks
• Front License Plate Configuration
• Maximum Vehicle Speed
• Module Configuration Setup
• !!! See website for more information !!!
• Added UDS-based system tests:
• Actuator Calibration Test
• Brake Pedal Sensor Calibration
• Cool Down Test
• Door Handle Verification Test
• Immobilizer Antenna Test
• Initalize ORC
• Locate learned keys
• Tire Size Programming (BCM Powernet modules)
• !!! See website for more information !!!
• Updated Cylinder Cutout actuation descriptions for the following modules:
• CM552
• CM845
• CM848
• Fixed issue when configuring CAN-base modules certain settings were being turned off when not turned off by the user
• Fixed issue when DTCs were failing to clear on UDS-based modules

Ford-family
• Added 12MY enhanced coverage
• Improved PATs Key Programming for CAN models by adding more error condition reporting to the user
• Fixed As-Built support

GM-family
• Added 12MY enhanced coverage
• Added ESC system support for Cadillac '05 - '06
• Added the following functions to the system test tab for CAN-based modules:
• Brake Pedal Position Sensor Learn
• Brake Pressure Calibration
• Fuel Injector Balance
• Steering Position Sensor Learn
• Yaw Rate Sensor Learn Command
• Added bitmaps and state sensors to '08 engines
• Added Automatic Brake Bleed for the Chevrolet '06 W body code
• Added SDM Setup for the Common Arc SIR Module
• Added Key FOB Programming for the following CAN-based modules:
• Common Arc Omron
• RFA LEAR GMLAN
• !!! See website for more information !!!
• Fixed the decimal place of TDC Offset sensor from 2 to 3 places

Honda / Acura
• Added 12MY enhanced coverage
• Added Blind Spot Information module support
• Fixed drop out of SFT actuation commands on Non-CAN modules
• Removed the Tire Sensor ID Learn test from the TPMS module for Type B modules since those modules do not support that test

Hyundai / Kia
• Added 12MY enhanced coverage

Isuzu
• Added 12MY enhanced coverage

Jaguar
• Added 12MY enhanced coverage
• Fixed Park Aid Module (older ISO version) not retrieving trouble codes without the History option selected for Current codes
• Fixed Electronic Parking Brake Release for Service on the XJ8 and VDP 06 - 12MY

Land Rover
• Added 12MY enhanced coverage

Mazda
• Added 12MY enhanced coverage
• Added As Built support for CAN-based controllers
• Added Mazda2 '11 - '12 EPS Steering Calibration support
• Added Removable HardTop full system support

Mercedes Benz
• Added 12MY enhanced coverage
• Added S Class (W221) Service Reset (Service 229.5) support
• Added S Class (W221) Active Body Control Rodeo and Pitch system tests
• Added C Class (204), E Class (212), and GLK Class (X204) Teach-In Anti-Pinch Protection support
• Added E Class (212) ESP Teach-In Component Yaw Rate and Longitudinal Sensor B24/15 support
• Improved E Class (212) system coverage

Mitsubishi
• Added 12MY enhanced coverage

Nissan
• Added 12MY enhanced coverage
• Added missing Mode 6 descriptions for CAN-based models

Subaru
• Added 12MY enhanced coverage

Toyota-family
• Added 12MY enhanced coverage
• Fixed EMPS CAN Torque Sensor Adjustment not working on late-model vehicles

ScanTool Version 10.3.2
-----------------------
General
• Improved connectivity for EnhancedPowertrain controllers by not requiring Generic OBDII support unless it's a Toyota-family model

Chrysler-family
• Added actuations for the '01 Dodge Viper
• Fixed the Cylinder #04 Misfire Counter sensor for JTEC-based vehicles

Ford-family
• Fixed F150 ABS not having rear wheel speed sensor

GM-family
• Added TAPs sensor for the Chevrolet HHR '11 2.2 Liter transmission
• Added missing bitmapped and state sensors for engine modules '04 - '07
• Added missing passenger engines:
• '06 4.4 Liter LC3 (9)
• '06 4.4 Liter LC3 (Y)
• Added missing light truck engines:
• '04 3.4 Liter LA1 (E)
• '04 5.3 Liter LM4 (P)
• '05 4.6 Liter LH2 (A)
• '06 4.3 Liter LU3 (X)
• '06 5.3 Liter L33 (B)
• '06 6.0 Liter LQ4 (U)
• '06 6.0 Liter LQ4 (U)
• Added missing current/history misfire cylinder 7-8 sensors for the Cadillac Escalade 6.2L '09
• Added 'Not Installed' entry for Automatic Transfer Case

Honda/Acura
• Added the following PGM-FI CAN system tests:
• Cancel History
• IMT (IMRC) Test
• ECM/PCM Reset
• EGR Test
• ETCS (TAC) Test
• VCT Test
• VPS VTEC
• VTEC Test
• VTEC LOW V/T Check
• Added the following Transmission A/T CAN system tests:
• Clutch Pressure Control (Linear) Solenoid A
• Clutch Pressure Control (Linear) Solenoid B
• Clutch Pressure Control (Linear) Solenoid C
• Clutch Pressure Control (Linear) Solenoid D
• TCM/PCM Reset
• Added the Torque Sensor Learn system test to the EPS system
• Fixed issue where on Non-CAN Honda Engine modules actuations would stop working when sensors where selected

Mercedes Benz
• Added DME MED177 support for equipped '11 vehicles
• Added SLK Class (172) '11 model support
• Added Sprinter (906) Air Conditioning (AAC) full system support
• Added C Class (204) and and GLK Class (X204) Sound, Electric Seat Adjustment, and SDAR system support
• Added ML and GL Class (164), C Class (204), GLK Class (X204), and R Class (251) Air Conditioning (AAC) Normalizing of Positioning Motors and Break-In of AC Compressor support
• Added ML and GL Class (164) and R Class (251) Electronic Seat Adjustment (ESA) Normalizing of Adjustments support
• Added ML and GL Class (164) and R Class (251) Re-Initialization of AdBlue Range support
• Added C Class (204) and GLK Class (X204) Instrument Cluster Reset General Maintenance support
• Added C Class (204) and GLK Class (X204) ASSYST Plus Reset Oil Service support
• Added CLS Class (219) and E Class (211) ASSYST Plus Reset Oil Service support
• Added ML and GL Class (164) and R Class (251) ASSYST Plus Reset Oil Service support
• Fixed C Class (204) 11MY TPM and SRS controller support not having PID support
• Fixed E Class (207 / 212) '11 TPM and SRS controller support not having PID support
• Improved M Class LWR163 PID support and replaced any German trouble code descriptions with English ones

ScanTool Version 10.3.1
-----------------------
General
• Fixed actuations not changing their value while actuation is active

Audi
• Improved trouble code descriptions

Ford-family
• Added PATs Ignition Key Program and Erase, Spare Key Enable/Disable for 09MY+ models
• Improved sensor load times by 20% using the latest ProLine hardware
• Fixed PATs Ignition Key Program and Erase not creating Master Keys on CAN models (03.5MY+)
• Fixed PATs Spare Key Programming not working on CAN models (03.5MY+)
• Fixed Powerstroke 6.0L ICM Speedometer actuation not scaling correctly

GM-Family
• Added missing bitmapped and state sensors for engine modules '00-'03
• Added missing light truck engines:
• '00 6.5 Liter L57 (Y)
• '01 5.7 Liter L31 (R) Bi-Fuel PCM/AFECM
• '01 6.5 Liter L57 (Y) 4-Speed
• '01 8.1 Liter L18 (E) Alternate Fuel (AFECM)
• '02 5.7 Liter L31 (R) Bi-Fuel PCM/AFECM
• '02 6.5 Liter L65 (F) Manual Body Code-P
• '02 8.1 Liter L18 (E) Alternate Fuel (AFECM)
• '02 8.1 Liter L18 (G) 5-Speed HD 3500
• '02 4.2 Liter LL8 (S) 1-Speed
• '02 4.2 Liter LL8 (S) 2-Speed
• '02 6.0 Liter LQ4 (U) Bi-Fuel PCM/CNG
• '02 6.5 Liter L57 (Y) 4-Speed / Manual
• Added missing passenger engines:
• '01 2.2 Liter LN2 (4)
• '02 2.2 Liter LN2 (4) Alternate Fuel (AFECM)
• '03 2.2 Liter LN2 (4) Alternate Fuel (AFECM)
• Added VPW engine system test 'Throttle Follow Test - APP' and 'Throttle Follow Test - TP'
• Note: This test is provided for those modules that do not allow you to view those
sensors normally on the Live Data Grid. (i.e. they display 'No data')

Jaguar
• Added warning for XK8 and XKR '97 - '06 Automatic Climate Control and Adaptive Ride Damping System requiring a 7 / 15 bridge to connect

Mercedes Benz
• Fixed some 210 LCP and OCP subtype descriptions not being defined

Porsche
• Fixed Cornering Lights not reporting trouble code descriptions

ScanTool Version 10.3
---------------------
General
• Fixed Freeze Frame extended PID sets not being reported on CAN models

Audi/VW/Seat/Skoda
• Added Seat Enhanced model support
• Added more information for KWP1281, KWP2K, and CANTP2.0 modules
• Improved European model support

BMW / MINI
• Added 118d '08 - '11 DDE support
• Added 135i and 335i '11 N55 DME support
• Added X6 '11 VTG system support
• Added MINI '10 - '11 RDC support
• Added MINI '07 - '11 DME Resetting Adaptation Values, Resetting VANOS Values, and Taught Values support
• Added M3, M5, and M6 Twin Clutch Gearbox (DKG) system tests:
Gearbox Adaptation
Reset Torque Characteristic Curves
Teach Clutch Slipping Point
Teach In Valve Characteristic Curves
• Added X3 '07 - '11 ABS DSC Pump Motor system test support
• Added X3 '04 - '11 Adaptive Directional Headlights (AHL) system support
• Added X3 '04 - '11 Universal Charging And Hands Free (ULF) system support
• Added X3 '04 - '11 Servotronic system support (SVT)
• Added X3 '04 - '11 Seat Occupancy Passenger (SBBF) system support
• Finalized all F01/F02/F10/F11/F12 model support
• Fixed DDE60 N47 Exhaust Gas Differential Pressure not being scaled correctly
• Fixed 525i 530i '04 DME being set as N54 instead of M54
• Fixed DKG actuations not working

Chrysler-family
• Fixed an issue were at times failed to retrieve DTCs from UDS based systems
• Fixed the A/C High Side Pressure max range to 511 PSI for the Dodge Cummins '07
• Fixed Cylinder #4 Misfire sensor reporting incorrectly for '00 - '05 JTEC modules

GM-family
• Added support for Injector Coding for the 6.6 Liter LMM engine
• Added transmission support for 3.4L '06 - '08
• Added missing bitmapped and state sensors for various '96 - '99 systems
• Added 5.3 Liter (T) engine/transmission for the Cadilac Escalade '04
• Added the following KWP2000 engine support for '07 - '09 (Pontiac G3 / Chevrolet Optra):
• 1.6 Liter L91 (6)
• 1.8 Liter LDA (B)
• 1.8 Liter L79 (3)
• 2.0 Liter L34 (Z)
• Fixed reporting sensors for the Saturn 3.0L L81 (R) Engine sensors from '00 - '03: Clutch Switch and EGR Sensor - Volts
• Fixed issuse where deselecting an actuation would not cause the actuation to stop right away
• Fixed APP 2 - Volts sensor for the 4.2 Liter '03 - '06
• Fixed Fuel Pressure Control Actuation for the Duramax Engine Modules
• Fixed issue when decoding VINs that at times the 4th product line gets set for Light Truck vehicles
• Fixed actuations for the Buick Lucerne '06
• Fixed DTC descriptions not printing because the '&' was used (replaced with 'and')

Honda / Acura
• Added a message for the user when connecting to older SRS modules on possible module communication issues and how to recover the communication
• Added the SH-AWD System
• Fixed issue for adding all sensors when module serial number is not found in the Honda database

Jaguar
• Added XK '07 - '11 and XF '08 - '11 ABS actuations
• Added XK '07 - '11 and XF '08 - '11 system tests:
Service Reset
Battery Replacement
Parking Brake Release To Service Position
Driver Door Glass Window Calibration
Passenger Door Glass Window Calibration
Fuel Prime (Petrol / Diesel)
Clear Adaptation (Petrol)
Purge Valve Self-Test (Petrol)
Air Conditioning System Adaptation (Diesel)
Particulant Filter Reset (Diesel)
Particulant Filter Fuel Related Component Replacement (Diesel)
• Finalized XF diesel ECM support

Land Rover
• Added missing LR2 TD4 diesel particulate filter voltage sensors
• Added missing LR2 07 - 11MY Instrument Cluster Control Panel support (including Service Interval Reset)
• Added missing LR2 07 - 11MY Rear Differential Control Module support
• Added missing Freelander 02 - 04MY TD4 Diesel system support (including Reset Adaptations)
• Added missing Freelander 02 - 04MY Airbag system support
• Added missing Freelander 02 - 04MY ABS system support (including Calibrate Steering Sensor)

Mercedes Benz
• Added Sprinter (906) 08 - 11MY missing trouble code descriptions for various controllers
• Added Sprinter (906) 08 - 11MY any missing ESP sensors and added the Calibration of Component B24/15 function
• Added Sprinter (906) 08 - 11MY Headlamp Range Adjustment (LWR) system support
• Added Sprinter (906) 08 - 11MY Door Module Front Drive (TSG) system support
• Added Sprinter (906) 08 - 11MY Service Reset support

Mitsubishi
• Added Animal, Pajero, Shogun, Triton, L200, and Warrior model support

Nissan / Infiniti
• Fixed diesel version of EnhancedPowertrain sensor Crank Position - TDC and Intake Air Volume being scaled incorrectly

Toyota-family
• Fixed ABS CAN Air Bleed not working for first year of certain models

ScanTool Version 10.2
---------------------
General
• Fixed Record not showing a dialog box due to Windows 7 64bit issue

Chrysler-family
• Added OCM System Verification Test for CAN-based variant 3 modules
• Fixed issue where the Actual Sync Value doesn't display when performing the Set Sync Test
• Fixed missing transmission system for the Chrysler Concord 3.5L '03

Ferrari / Maserati
• Added support for ABS, airbags, suspension, TPMS, DME SX / DX, and gearbox

Ford-family
• Added KOER system test for the 11MY+
• BMS Reset system test support
• Fixed Passenger System Reset not working for Lincoln MKX and Ford Edge 11MY+

GM-family
• Fixed engine speed sensor on the Pontiac Firebird '98 5.7L

Honda / Acura
• Added the selection of vehicles transmission type: Manual/Automatic
• Added Freeze Frame Support for the following systems:
• Active Control Mount System
• Anti-Lock Brakes Type 1
• Electric Vacuum Pump System
• IMA CAN Battery
• IMA CAN Motor
• Transmission
• Transmission CVT CAN
• Added Module Reset Test for Body Control Modules
• Added System Tests:
• Body Control Modules
• Reset Test
• Active Control Module
• ACM Reset
• Honda ABS (Type 1 & 4)
• Pulse Test
• Wheel Speed Pulse Counter Reset
• Calibrates all sensors
• Brake Pressure Sensor
• Calibrate Lateral Sensors
• Calibrate Longitudinal Sensors
• Calibrate All Sensors
• PGM-FI
• EGR Test
• IMT (IMRC) Test
• VTEC LOW V/T Check
• Fixed communication issues with CAN-based IMA Battery and IMA Motor

Hyundai / Kia
• Improved Sonata NF Chassis ABS Steering Angle Calibration failing because of car timing out

Mercedes
• Fixed early C and ML class models with the ASR system reporting wheel speeds incorrectly

Nissan / Infiniti
• Added Display CVTF Deterioration Date support
• Added Reset Auto Back Door Status
• Fixed Fan Duty Cycle only operating at 10%.

Subaru
• Added all missing Air Conditioning CAN system support
• Added all missing Electronic Parking Brake CAN system support (including the calibartion and setting functions)

Toyota-family
• Added PM1 Gateway CAN and Telematics full system support
• Fixed Gen 1 Airbag SRS not reporting Historical codes

ScanTool Version 10.1
---------------------
General
• Added support to show firmware and hardware ID without having to be connected to the vehicle
• Fixed issue where you couldn't pull Mode 6 data from the Enhanced Powertrain System for
• Honda/Acura
• Audi/VW
• Chrysler-family
• Fixed data logging failing to start because a slash character was used in the vehicle name
• Fixed Freeze Frame not working on older ISO vehicles

Audi / VW / Seat / Skoda
• Added 3k new trouble code descriptions
• Fixed trouble code description lookups only using engine tables for all controllers

GM-family
• Added Actuation Tests for Preset TAPS and Reset TAPS from '01 - '11
• Added the following ABS Commands '05 - '11:
• Brake Pressure Sensor Calibration
• Yaw Rate Sensor Calibration
• Steering Angle Sensor Centering
• Added more new trouble code descriptions
• Added Cooling Fan Actuation for the '06 Impala
• Fixed an issue where actuations would time out (i.e. Engine Speed, EVAP Vent Solenoid, etc.)
• Fixed issue where the symptom description for CAN DTCs were not output
• Fixed the engine type label for the Buick Enclave 3.6 Liter '11 from (V) to (D)

Chrysler-family
• Added MSCAN Network Support
• Added the follow tests for VPW-based HVAC Modules '02+ (i.e. Dodge Cummins, Dakota, Durango, Ram)
• A/C Cool Down Tests
• Actuator Circuit Test
• HVAC Door Recalibration
• Improved CAN-based Mode 6 descriptions

Ford-family
• Finalized all 11MY coverage
• Added Misfire Monitor Neutral Profile Correction support for the new ECOBoost and 5.0L engines
• Added TCM CAN Reset Transmission Adaptive Tables, Halt Transmission Adaptive Learning
, Resume Transmission Adaptive
• Added PCM CAN Clear Transmission Adaptive Tables, Stop Use of Transmission Adaptive Learning, Halt and Resume Transmission Adaptive Learning
• Fixed Mode 6 issue not translating the TID 0x51 and 0x52
• Fixed Powerstroke 6.0L missing the EGR Valve Position Actual sensor
Hyundai / Kia
• Finalized all 11MY coverage
• Added Power Sliding Door LH and RH full system coverage
• Added Active Hydraulic Boost PTS Calibration and Pressure Sensor Calibration system tests
• Added WCS / PODs Reset system tests
• Added AHLS System Initialization and Leveling Initialization system tests
• Added AT Reset Auto TA Values system tests
• Improved user-interface to include warning about half-year model selection for Optima models

Mercedes
• Finalized all 11MY coverage

Nissan / Infiniti
• Finalized all 11MY coverage (to include complete LEAF and M35 Hybrid model coverage)
• Added AT CAN Conform CVTF Deteriation Date system test support
• Added GTR '09 - '11 AT Clutch Gear Learning, Show Oil Temp History, High Temp Oil Warning History system tests support
• Added missing GTR '09 - '11 Air Suspension sensors
• Added Convertible Roof full system support (G37, 370Z, and Murano)
• Improved CAN system communication recovery when active sessions timeout
• Fixed Adaptive Lighting Levelizer and Steering Calibration test not working with the ProLine connectors

Subaru
• Finalized all 11MY coverage
• Added all missing TPMS system support (previously missing some sensors and trouble code descriptions)
• Added Airbag system supporting Historic codes
• Added full ABS VDC system support (to include ABS VDC Set Mode Steering Angle Sensor / Lateral and Longitudinal G Sensor Zero Point)
• Added missing Integrated Unit Module sensors
• Improved error handling for actuations
• Fixed EnhancedPowertrain
Fuel Level Resistance incorrect scaling
Toyota-family
• Improved recovering the connection when switching tabs faster then the vehicle can setup a new connection
• Fixed Tundra '07 - '12 TPWS support not showing temperature and pressure sensors

ScanTool Version 10.0.3
-----------------------
Ford-family
• Finalized 11MY support (KAM Reset, PDC Reset, and Transmission Adaptive Learning)
• Fixed Econoline '08 - '09 gas ECM not having correct PID tables

Honda / Acura
• Fixed CAN-based module actuations
• Fixed the reporting of 'Equivalence Ratio' sensor for CAN-based Enhanced Powertrain

ScanTool Version 10.0.2
-----------------------
Audi / VW
• Fixed UDS-based controllers report Unknown Trouble Code description instead of the description

BMW / MINI
• Added Vario Transfer Gearbox (VTG) DCAN Reset Oil function support
• Improved X5 4.8L '11 body controllers support

Chrysler-family
• Added Misfire Cylinders for '99 JTEC-based modules
• Removed duplicate engine listings for the Chrysler Sebring '09*
• Fixed the Tire Sensor IDs being displayed backwards for the UDS-based TPM system*
• Fixed communication issues on vehicles using the NGC module (i.e., Chrysler Sebring '05)

Ford-family
• Added '12 Mode 6 descriptions and scaling

GM-family
• Fixed VIN Decoding table error which caused some models to not decode correctly even though the table was correct

Honda / Acura
• Added in the 'TPM Sensor ID Force Write' test the displaying of the current Tire IDs and also after writing has finished we pull the sensor Tire ID and display it to the user to verify successfull write

Nissan / Infiniti
• Improved connection times improved as much as 3x faster when selecting a controller
• Fixed AT CAN variants reporting zeros instead of live data values

Toyota-family
• Added more descriptions to the EnhancedPowertrain actuations
• Improved recovering the connection if an actuation was sent and the bus was offline for too long

ScanTool Version 10.0.1
-----------------------
General
• Added German and Spanish language version support
• Fixed updating without running the uninstall crashing the software on launch

BMW / MINI
• Added Vario Transfer Gearbox (VTG) Reset Oil function support
• Added X5 E70 IHKA support
• Added R56/R57/R60 Steering Angle Adjustment and DSC Sensor and Unit Calibration system tests
• Moved Battery Replacement Registration for E65/E66 to Power Management (PM) so as to follow uses BMW's function location
• Fixed Vario Transfer Gearbox (VTG) not connecting on the X3 xDrive 3.0l 10MY
• Fixed X5 3.0i '05 and '06 lacking LEV-based powertrain
• Fixed X5 E53 IHKA actuations

Ford-family
• Fixed Powerstroke 6.0L 2005 ECM actuation table not showing Injector Disable
• Fixed F150 '03 data stream tables not matching the correct controller coverage

Honda
• Fixed issue where sensors were being added twice for older models

Toyota-family
• Fixed Prius Gen 1 Subcode retrieval when code is over 256
• Fixed Mode 6 for CAN-based models having some TIDs scaled twice

ScanTool Version 10.0
----------------------
General
• Added battery voltage display to the bottom of the status bar
• Added J2534 hardware support
• Added Mode A trouble code support
• Improved the main button selection to include Connect, Disconnect, and Change System.

Audi / VW
• Added 11MY support
• Added over 15,000 more DTC descriptions for all of the UDS-based controllers
• Added over 3,000 SAE DTC descriptions
• Improved communication timing

BMW / MINI
• Added 11MY support (Limited F chassis support, full coverage coming shortly)
• Added '08 - '10 DDE 7.0 full system support for 135d, 335d, 535d, and X5 diesel.
• Added '08 - '10 120d and 123d model support
• Added '06 - '10 320d model support
• Added '04 - '10 530d model support
• Added over 1,000 more DTC descriptions for dozen of controllers (including SMGs)
• Added Steering Column Module (SZL) E60 and E63 Steering Angle Calibration support
• Added Transmission Oil Deterioration Collective resetting for TransmissionEGS6HP and TransmissionEGS6HPTU
• Added Transmission 6HP / 6HPTU / GM6 (EGS) Reset Oil Life Counter support
• Added Longitudinal Sensor Calibration, Steering Sensor calibration, and Pump Motor support for DSC 60PP and DSC Premium controllers
• Improved compatibility between BMW DS3 controllers and OBD-II functionality
• Fixed 645i '04 - '07 Satellite B Pillar not reading or clearing trouble codes

Chrysler-family
• Added 11MY support
• Added the Transmission Quick Learn on PCM controller transmissions - PCM Variant 8
• Added Fuel Pressure Override Test for the '04 - '05 Cummins
• Added 1000 more DTC descriptions
• Added CAN system test which performs a network test on possible installed modules and if found returns the installed modules variant version
• Added a 3.8 Liter Engine entry for the Chrysler Town and Country '09
• Added CAN-based System Configuration:
• Auto Door Locks
• Beltminder
• Current VIN Programming
• DRL Setup Configuration
• Module Configuration Setup
• Added CAN-based System Tests:
• CAM and Crank Relearn
• EATX Quick Learn
• Engine On Odometer
• Initialize ORC
• Learn ETC
• New Engine Installed
• Retrieve Installed Module VINs
• Tire Size Programming (manually enter tire information)
• !!! See website for more information !!!
• Improved actuations stability while viewing live sensors
• Improved 'Learn ETC' system test by adding instructions
• Fixed the max range value for vehicle speed for the Dodge Durango '00 engine
• Fixed issue when pulling DTCs on Non-Engine / Non-Transmission modules as SAE based codes for CAN modules
• Fixed the voltage ranges for the Chrysler Cross-Fire '04 sensors to read as 5v
• Changed the sensor name of the HPCR Fuel Pressure Output to
HPCR Fuel Pressure Duty Cycle Output
• Moved the Contribution Cylinder Test under OnBoard Tests for the '04 - '05 Cummins

Ford-family
• Added 11MY support
• Added support for Powerstroke 6.4L Power Balance to disable injectors while operating
• Added Tire Size Programming for Powerstroke 6.4L models
• Added '10+ full system support for:
• FuelFireHeaterCAN
• CruiseControlModuleCAN
• HeadsUpDisplayCAN
• InteriorLightingControlModuleCAN
• RemoteFunctionActuatorCAN
• SteeringEffortControlModuleCAN
• Added actuation support Enhanced Powertrain CAN for Ford of Europe models
• Added Fire Suppression System Module full system support
• Added new VGT sensors for latest Powerstroke 6.0L calibration
• Added Passenger System Reset support
• Improved Ford of Europe Transit and Transit Connect support
• Improved Injector Correction Factor support by eliminating the need to input the displacement
• Fixed Taurus 10MY+ IPC sensor list missing some PIDs
• Fixed Ford of Europe Galaxy / Mondeo / SMax 07MY+ ABS controllers not reporting trouble codes if more than ten exist

GM-family
• Added 11MY support
• Added 5000 DTC descriptions for Global-A vehicles
• Added descriptions for DTC Symptom codes for GMLAN based modules
• Added Idle Relearn actuation to the engine systems '01 - '11
• Added Chassis and Body support for the Pontiac Montana '08
• Added SDM Setup and Part Number Programming for the following modules (See website for vehicle coverage):
• Common Arc
• Epsilon
• Added the actuations for the IPC for Chevrolet Light Truck '05 C & K
• Added missing Cylinder #5 for the injector kill actuation on the '04 - '05 Diesels
• Added missing cylinders for the 5.7L '97 Cylinder Injector Balance Test
• Added missing engines for the Chevy Aveo 1.4 Liter LDT and 1.6 Liter LXV '09 - '10
• Added missing engines for the Pontiac Vibe 1.8 Liter LAY and 2.4 Liter LAX '09 - '10
• Added more instructions when running the vehicles CKP Relearn test
• Improved actuations stability while viewing live sensors
• Improved Mode 6 scaling and units descriptions
• Improved all flow rate-based sensors to a precision of 3 decimal places
• Added VIN model decoding for Light Truck '00 - '11
• Except for GMC and Chevrolet Light Trucks '00 - '09
• Fixed the Fuel Gauge actuation sweep for the Chevy Uplander '05
• Fixed the invalid Transmission TFP switch State for the Chevy Malibu '06
• Fixed the TCC Solenoid actuation for the Chevy Silverado 6.6L '07
• Fixed the seat belt buckle PIDs reporting incorrectly on a Chevy Cobalt '09
• Fixed Vehicle Theft Deterrent system selection for the Chevy Malibu '01
• Fixed issue with some CKP tests reporting the test failed, because it couldn't find the engine speed sensor

Honda / Acura
• Added 11MY support
• Added support to retrieve diagnostics trouble codes from All systems
• Added the VTC System Test
• Added the following system test for KWP2000-based systems:
• Air Conditioning Module
• Self Diagnostics
• Central Panel Module
• Self Diagnostics
• Driver Door ECU System Tests
• Reset of Driver Side Window Position
• Reset of Assistant Side Window Position
• Reset of Left Rear Side Window Position
• Reset of Right Rear Side Window Position
• Hands Free Telephone Module
• Passcode Clear
• Immobilizer Module
• Keyless Entry Registration
• Diagnosis of Keyless Entry function
• METER Module:
• Self Diagnostics
• Engine Oil Replacement
• ATF Replacement
• Mission Replacement
• Power Window Module System Tests
• Diagnosis of Keyless Entry function
• Reset of Driver Side Window Position
• Reset of Assistant Side Window Position
• Reset of Left Rear Side Window Position
• Reset of Right Rear Side Window Position
• Smart Entry ECU
• Self Diagnostics
• Diagnosis of Keyless Entry function
• Improved Mode 6 scaling and units descriptions

Hyundai / Kia
• Added 11MY support
• Added Optima HEV and Sonata HEV '11 model support
• Added Soul 10MY+ diesel engine support
• Added Cee'd '09 - '11 petrol and diesel model support
• Added Carens '02 - '11 petrol and diesel model support
• Added Venga '09 - '11 petrol and diesel model support
• Added missing Genesis '10 Adaptive Front Lighting System support
• Added SMART Key full system support
• Added missing TPMS CAN sensor IDs
• Fixed ESC CAN G Lateral Sensor issue only show negative values

Jaguar
• Added 11MY support
• Fixed ICMII CAN Odometer sensor reporting wrong values

Land Rover
• Added 11MY support
• Added Service Interval Reset (SII) for 05.5+ models
• Added Steering Wheel Angle Calibration for 05.5+ models
• Added Enhanced Powertrain CAN full actuation support for 05.5+ models
• Added Enhanced Powertrain CAN Reset Adaptation support for 05.5+ models
• Added Ride Level Control Module CAN full actuation support for 05.5+ models
• Added new B Code trouble code descriptions

Mazda
• Added 11MY support
• Added Mazda of Europe / Japan model support (01MY+)
• Added Blind Spot Module (Left and Right) CAN 14229 full actuation support
• Added Instrument Cluster CAN 14229 full actuation support
• Added Transmission Control CAN 14229 full actuation support
• Added ABS CAN 14229 full actuation support and Yaw Raw, Brake Pressure, and Lateral Sensor Initialization (10MY+)
• Added RCM CAN 14229 Passenger Seat Rezero (Will not code new controllers) (10MY+)
• Added KAM Reset for the CAN 14229-based ECMs

Mercedes
• Added 11MY support
• Added support to retrieve and clear diagnostic trouble codes from All systems
• Added complete B Class model support
• Added Wheel ID Registration for GL Class (164) and S Class (221)
• Added SBC 1 Deactivation and Activation
• Added CLS Class (216) and S Class (221) Electronic Seat Control full system support
• Added CLS Class (216) and S Class (221) Dynamic Seat Control full system support
• Added missing Electronic Height Control (EHNR211) support RClass 164 models
• Added DME, EGS, SRS, and ASR support for E Class pre-DAS3 (<98MY)
• Fixed missing ESP MK25 support for '03 W163 models
• Fixed early EGS controllers not connecting because vehicle responds with multiple delays

Mitsubishi
• Added 11MY support
• Fixed '10 and '11 Mode 6 data not being translated

Nissan / Infiniti
• Added 11MY support (LEAF support coming soon)
• Added GTR Enhanced Powertrain full system support
• Added Side Radar Left, Side Radar Right, and ODS full system support
• Added Steering Angle and G Sensor Calibration support for CAN ABS controllers
• Added missing IPDM sensors
• Fixed ADP CAN actuations working with ProLine hardware

Porsche
• Added 11MY support (Panomara and Cayenne coming soon)
• Added PSM CAN actuations
• Added GT2 and GT3 10MY DME full support
• Added Porsche 996 Cup Car MS31 DME full system support (Requires Cup Car cable sold separately)
• Added Porsche 997 Cup Car MS31 DME trouble code support only (Requires Cup Car cable sold separately)
• Fixed connectivity issues with Porsche Cayenne '03 - '04 body controllers

Toyota-family
• Added 11MY support
• Added Toyota of Europe model support (01MY+)
• Added missing RX450h and Prius 10MY Hybrid Controller, Transmission, and Power Source Control full system support (Vehicle requires latest calibration from Toyota)
• Added TPWS CAN Tire Registration support (Requires firmware 32)
• Added VIN programming support
• Added new 10MY Back Door Motor CAN PID set
• Improved TPWS Tire Registration instructions
• Fixed Main Body CAN actuations not working for some late models
• Fixed Mode 6 not scaled and translated for pre-08MY vehicles that are CAN-based

ScanTool Version 9.1.1
----------------------
• Fixed activation code issues with the ScanTool 9.1 update

ScanTool Version 9.1
----------------------
Audi/VW
• Added an entry in the actuation tab to point the user to the Test OnBoard System tab for Actuation support
• Added more Output Test descriptions
• Fixed software crashes when requesting Clear All codes from '08 - Tire Control Display (RKA+) - CAN' system

BMW / MINI
• Added X5 '10 Parking Distance Controller (PDC) full system support
• Added X5 '10 Rear Heater and AC Controller (FKA) full system support

Chrysler-family
• Added TPMS ID Registration support for CAN-based vehicles via the Wireless Control Module
• Fixed body code selection for the Dodge Caravan '02

Ford-family
• Added Vehicle Dynamics Module CAN Pneumatic Test, Accurate Trim Test, and Ride Height Calibration function support
• Added Semi Automatic Ride Control and Rear Air Suspension Pneumatic Test support
• Fixed Barometric Pressure and MAF scaling for Powerstroke 60L '03 - '04

GM-family
• Added TPMS ID Registration support via CAN-Based Remote Control Door Lock Receiver '05+
• Added the Transfer Case for the Chevy Trailblazer '06
• Added engine support for the Pontiac Bonivalle '05
• Added missing engine code for the Chevy Silverado '02 2.2 Liter (H)
• Added 1.5k DTC descriptions
• Fixed engine communication for CAN-based communication
• Fixed engine code for the Chevy Traverse '09
• Fixed sensor names not displaying on a Chevy Avalanche '04
• Fixed displaying of the TPMS ID on CAN-based RCDLR
• Fixed Fuel Rail Pressure sensor units for the Chevy 2500 '08 6.6 Liter
• Fixed missing state/bitmap sensors for '05 Buick LeSabre
• Fixed issue with some CKP tests reporting the test failed, because it couldn't find the engine speed sensor

• Updated the DTC message when first entering the system on what codes are pulled
• Changed retrieving history codes by default on ATC modules. This controller now requires the History box checked to get these codes now

Honda-family
• Added TPMS ID Registration support
• Added ABS for the Honda Accord Hybrid '07
• Added missing ELD sensor for the Honda Civic '04
• Fixed issues where we would mis-identify the vehicles installed TPMS modules

Isuzu
• Added engine actuations for the following vehicles:
• '00 Amigo 3.2 Liter
• '02-'04 Axiom 3.5 Liter
• Fixed O2S2 not reporting on a Axiom '02

Land Rover
• Added Engine Type selections for Petrol and Diesel to make the model selection more intuitive

Mercedes
• Added SBC 1 (SL Class '03) Deactivation and Activation
• Added TPMS trouble code retrieval for GL Class '10
• Added R170 RFL (Radio Frequency Locking) system support
• Added CDI5 actuations Resetting the Lambda Values and Initialization Diesel Particulant Filter

Mazda
• Added Active Front Lighting and Blind Spot Monitoring Left and Right full systems support

Porsche
• Improved TOP DME live data support to allow for a full 8 sensors (Requires firmware 31 or later)

Toyota-family
• Added TPMS ID Registration support

ScanTool Version 9.0.4
----------------------
General
• Fixed issue with Windows Vista and Windows 7 installations not showing sensor names

ScanTool Version 9.0.3
----------------------
General
• Fixed installation using the Desktop as the directory for the AutoEnginuity.log. It now uses the installation directory of the software

Mercedes
• Added SLK Class (R170)
Climate Control Module (TAU), Multifunction Control Module (CCM), and Vario Roof (VR170) full system support
• Added SL Class (R230)
Electric Seat Adjustment (ESA-FL) and (ESA-FR) full system support
• Improved connectivety to AB controllers on early model vehicles

Porsche
• Improved TOP DME live data support to allow for one more sensor per request

ScanTool Version 9.0.2
----------------------
BMW / MINI
• Added X5 and X6 M model support
• Added Gear Selector Switch E70 full system support

Chrysler-family
• Fixed reporting a P0000 when a Chrysler Code didn't read '0x00'
• Added Dodge Ram 1500 4.7L '03 transmission system support

GM-family
• Fixed Silverado Hybrid not showing Enhanced Powertrain
• Fixed ABS Automatic Brake Bleed for the Chevy Express Van 4.8L '06

Honda-family
• Added Acura ZDX model support
• Added Honda Accord Crosstour model support

Jaguar
• Fixed CAN controllers not connecting with ScanTool OBD-II 7C hardware version

ScanTool Version 9.0.1
----------------------
General
• Added support for ISO INITs on pin 7 and 15 using the Initialization Type "KWP ECM Forced Init"

BMW / MINI
• Fixed Z4 3.0is N52
Clocking Injector and Fan actuations failing

• Fixed 7 Series CBS Engine Oil reset failing under certain conditions
Chrysler-family
• Fixed AE Enhanced connectors not being allowed to connect to Chrysler vehicles

GM-family
• Added Global-A '10MY actuations
• Removed the Daytime Running Lights actuation from the GMC Envoy XL '05 due to the module
not supporting the command correctly.

Toyota / Lexus / Scion
• Fixed OCC Zero Point Calibration failing with ProLine hardware

ScanTool Version 9.0
----------------------
User-Interface
• Changed the default location for the logging file from the root of the C drive to the application directory
• Improved Playback support by allow the Graph controls to load the entire data log file in a single load cycle
• Improved button graphics to be higer-resolution and larger
• Fixed the Meter controls from reporting non-zero values when the control had the Off selection
• Fixed the GM- and Honda-family Mode 6 reporting when the the high-bit of the Component ID was set preventing it from getting decoded

Audi / VW
• Added 10MY coverage
• Added the handling of multiple busy responses when attempting to pull DTCs on CAN TP2.0 modules (Requires firmware 29)

BMW / MINI
• Added 10MY coverage (Missing F01 support at this time)
• Added all missing JBE (Junction Box Module) sensors
• Added all missing FRM (Footwell Module) sensors
• Added all missing CVM and CTM (Convertible Top Module) sensors
• Added complete MJoystick (MJOY) system support
• Added complete Active Backrest Width (ALBFA and ALBBF) system support

Chrysler-family
• Added 10MY coverage
• Added the Diesel Stationary Desoot system test
• Added the Power Top Module system to the '07-'08 Chrysler Sebring Convertible
• Added the Slow Speed sensors to the Enhanced Powertrain Module
• Fixed the Brake Bleed system test for CAN-based ABS modules
• Fixed Pinion Factor programming for VPW-based ABS modules
• For CAN-based modules the Variant ID of the connected module is now displayed on the status bar
• Updated Dodge Sprinter Engine DTC Descriptions

Ford-family
• Added 10MY coverage
• Added Power Balance graphing support for CAN-based (04 - 10MY) gas and diesel vehicles
• Fixed late model actuations not working from the Diagnostics Trouble Codes tab. Now all tabs can perform any actuations.

GM-family
• Added 10MY coverage
• Added the Saturn L100 model support
• Added the Chevrolet Cruze model support
• Added Transmission selection for the '96 & '99 Hummer H1 vehicle
• Added a test to verify module is present before performing DTC retrieval
• Added Fan High/Low Speed actuation for the Chevrolet Malibu '05
• Added Global-A vehicle coverage:
• Buick Allure
• Buick LaCrosse
• Cadillac SRX
• Chevrolet Camaro
• Chevrolet Equinox
• GMC Terrain
• Missing following vehicle coverage at this time:
• Global-A
• Actuations
• Mobile Telephone Control Module (Hardware Doesn't Support Network)
• Multi-Axis Acceleration Sensor Module (Hardware Doesn't Support Network)
• Suspension Control Module (Hardware Doesn't Support Network)
• Steering Angle Sensor Module (Hardware Doesn't Support Network)
• Aveo 2010
• 1.4 Liter LDT
• 1.6 Liter LXV
• Vibe 2010
• 1.8 Liter LAY
• 2.4 Liter LAX
• Fixed the CKP test for the GMC Sierra 4.3 Liter '99
• Resolved issue with History DTC retrieval for the CAN-based Passenger Presence Module
• Resolved issue with DTC retrieval for the Chevrolet 2500 '05 Automatic Transfer Case

Honda / Acura
• Added 10MY coverage
• Fixed connecting to the IMA Motor module on Honda Insight '01 - '06
• Fixed error message handling of failed actuations on CAN-based modules
• Fixed communication issues with the Acura TL 2004 engine module
• Fixed the ATF Temperature sensor reading for the Honda Odyssey '03
• Missing following '10 ABS coverage at this time:
• Acura MDX
• Acura ZDX
• Honda Fit

Hyundai / Kia
• Added 10MY coverage
• Added missing BCM for Sedona 07MY+ (VQ)
• Added missing TPMS for Sedona 07MY+ (VQ)
• Added all missing TPMS systems for 09MY
• Improved support for Optima (MG Chassis) 06.5MY

Jaguar
• Added 10MY coverage

Land Rover
• Added 10MY coverage

Mercedes
• Added 10MY coverage
• Added full CDI6 Bin5 diesel engine support
• Added missing CDI5 diesel engine trouble descriptions
• Fixed ME2.0 DME actuations not working

Mitsubishi
• Added 10MY coverage

Nissan / Infiniti
• Added 10MY coverage

Porsche
• Added 10MY coverage

Subaru
• Added 10MY coverage

Toyota / Lexus / Scion
• Added 10MY coverage (Missing 10MY Pruis hybrid controllers support)
• Added all remaining CAN Gateway systems (Left Seat AC CAN and
Right Seat AC CAN)
ScanTool Version 8.4
----------------------
Audi / VW
• Improved speed in retrieving DTCs from KWP2000-based modules
• Fixed an issue connecting to the TPMS module on an Audi S4 '08

BMW / MINI
• Added DKG Twin Clutch Gearbox full system support (excludes adaptation and teachin functions)
• Added GWS Gear Selector Switch E9X full system support
• Added Electronic Height Control (EHC) full system support
• Added IHKA E60, E61, E63, and E64 full system support
• Added all missing CTM (Convertible Top Module) sensors
• Added all missing RDC (Tire Pressure Control) sensors
• Added all missing FRM (Footwell Module Control) sensors
• Added all missing DSC (Dynamic Stability Control) sensors
• Added full support for missing R56/R57 series controllers (CVM and ULF)
• Added full support for missing 7 series controllers (IBOC, KHI, NVK, NVE, and PM)
• Added all missing DSC (Dynamic Stability Control) sensors
• Added 520d 525d '98 - '07 DDE M57 full system support
• Added 135d 335d 535d '04 - '07 DDE full system support
• Added 760i DME full system support
• Fixed 316i '99 - '00 DME live data issues

Chrysler-family
• Added transmission entry for the Dodge Dakota '08 - '09
• Add Sebring Convertible model selection CAN-based coverage
• Added missing Dodge Grand Caravan '09 support
• Updated VIN Decoding for the Dodge Grand Caravan '09
• Changed the maximum value range for the Vehicle Speed to around 150 ~ 250 (depending upon the system)

Ford-family
• Added Mondeo '01 - '06 Injector Control Module full system support
• Fixed Puma ABS connection issues
• Improved Escort, Focus, Fiesta, Ka, Puma, and Mondeo model support by now only listing support bi-directional controls instead of the entire list

GM-family
• Added GMC '04 engine entry for the 6.6L LLY engine
• Added Buck Enclave '08 support for the 3.6L engine
• Added engine and transmission for the Cadillac CTS-V '04-'05
• Added the 3.9L engine entry for the Uplander '08
• Added missing bitmap and state sensors for the Chevrolet Suburban 8.1L '06
• Added the Air Pump option for the Buick LaCross '08 which includes the sensors and actuations
• Added the Generator-L bitmap sensor for the Corvette '00
• Improved speed on detecting using CAN when trying to access those types of systems
• Fixed Buick Enclave not being set as a Light Truck
• Fixed an issue where body systems were unavailable for Saturn ION '07 due to a table error
• Changed retrieving ATC Module DTCs History codes to being pulled by default due to customer requests (factory requiring the specific selection)
• Changed retrieving Body or Chassis systems History codes to being pulled by default due to customer requests (Does not include CAN-based modules)

Land Rover
• Added DDE 4.0 (BMW-based diesel Range Rovers '01 - '04) full system support

Mercedes
• Added A Class (168) KI (Instrument Cluster) full system support
• Added C Class (204) TSSR 204 Panoramic Roof full system support
• Fixed A Class (168) Airbag connection issues
• Fixed CDI2 connection issues with early ML Class

Opel / Vauxhall
• Added the start of implementation with at the very least engine DTC Read/Clear '01-'08
• Removed the Signum model and placed it with the Vectra-C since they are the same and updated the Vectra-C to include the Signum model

ScanTool Version 8.3.1
----------------------
Audi / VW
• Updated the VIN Decoding for Audi A4 '09
• Increased module initialization speed for CAN vehicles when pulling DTCs and viewing sensor data
• Added more ASAM Data set information for Airbags, All-Wheel Drive, and Transmission modules
which include:
• Adaptations
• Basic Settings
• Output Tests

BMW / MINI
• Fixed 5 Series '04 - '07 SZL system not reading or clearing codes
• Fixed 328xi missing system entries

Chrysler-family
• Fixed an issue when performing a tire size reprogramming when we where displaying the next selected entry, not the entry that the user selected.

Ford-family
• Fixed PATs programming for some CAN models

GM-family
• Fixed an issue where we missed a History code on the PPS module

Land Rover
• Added MCAN full system support for LR2 models (Requires the ProLine hardware):
Driver Door Module
Driver Seat Module
HVAC
Passenger Door Module
Passenger Seat Module
Steering Angle Sensor Module

Mercedes
• Added CLK Class (208) Door Control Modules full system support
• Added E Class (210) Electronic Seat and Door Control Modules full system support
• Added E Class (210) missing SAM210 actuation support
• Fixed E Class (210) KIL connectivity issues

ScanTool Version 8.3
----------------------
• Improved VIN decoding by trying both physical and functional addressing methods for CAN-based vehicles

Audi / VW
• Improved CAN DTC retrieval
• Added the ability to move on to the next step in the Basic Settings functions when the test has completed
• Added UDS module support: (i.e. '09+ Audi A4/S4)
• UDS Supported Features:
• Adaptation - (On supported ASAM Datasets)
• Basic Settings - (On supported ASAM Datasets)
• Clear DTCs
• Long Coding
• Read DTCs - (Limited DTC Descriptions at this time)
• Freeze Frame
• Fixed a communication issue with KWP2000-based Airbag modules
• Fixed module serial number retrieval for CAN TP2.0 which could cause connection issues for some modules

BMW / MINI
• Added MINI DME R50/R51/R53 complete reset adaptation support (CVT, idle, Misfire, mixture, knock control, lambda, etc.)
• Added ABS MKIV actuation support
• Fixed 5 Series E6X models B Pillar Satellite Right and Left trouble codes from not clearing
• Fixed E46 IHKA trouble code reporting for more then a single trouble code
• Fixed CBS resetting for '06 3 Series

Chrysler
• Added the available '06 Tire Size list to the Tire Size programming support
• Added the ability to select the CM551 ECM or a JTEC ECM for a '98 Cummins
• Added missing systems for the Dodge Viper ('06 - '09):
• Gateway ECU
• Occupant Restraint Controller
• Heating and Air Conditioning System
• Master Audio Unit - Radio
• Fixed an issue for VPW-based Airbag controllers where unsupported DTC address spaces weren't being
initialized when the module was installed causing us to report those codes present

Ferrari
• Added non-OBDII P Code tables and VIN decoding

Ford-family
• Added Power Balance support for most V6 models (Requires ProLine hardware)
• Added Fusion Hybrid Transmission CAN 14229 full system support
• Added Transit Connect model support

GM-family
• Added Chevy Impala '06 Engine Actuations
• Added bits and states to the '05 4.2L LL8 (S) engine
• Added KWP2000 1.6L L91 engine support (i.e., Chevy Aveo)
• Added Pontiac G8 '09 body and chassis systems
• Added Brake Bleed procedure for the 4WAL system
• Added missing 3-2 Downshift Solenoid sensor from the '04 Chevy Trailblazer Transmission system
• Added Manual Transmission selection for the '07 Saturn ION 2.2 Liter L61 (F) vehicle
• Resolved an issue where the system selection names for ABS didn't match the actual ABS system selected
• Fixed the Max O2 sensor voltage value for the '97 Buick

Jaguar
• Added MCAN full system support for XK and XF models (Requires the ProLine hardware):
Aux./Central Junction Box
Driver Door Module
Driver Seat Module
Folding Top Control Module
HVAC
Integrated Control Panel
Keyless Vehicle Module
Park Aid Module
Passenger Door Module
Passenger Seat Module

NAV / CEL / Audio / SAT Module

Side Object Detection Control Module (Left and Right)

Tire Pressure Module

• Added Keyless Transponder Module system support
• Added Denso VID Block Contents reporting support
• Added XJR '98 - '03 and XJL '96 - '03 RCM ISO system support (Requires the ProLine hardware)
• Added XJ8 '08 - '09 and XF Driver Climate Seat Module CAN system support
• Added XF '08 - '09 Gear Shift Module system support
• Added more trouble code descriptions for the XF model
• Added History trouble code support for all CAN-based models because the overwhelming number of trouble codes reported normally (Requires the ProLine hardware)
• Added VDP, XJ8, and XJ8L full bi-directional control support (ABS, ATC, DDM, DSM, EPB, PAM, PDM, PSM, REM, etc.)
• Added VDP, XJ8, and XJ8L Parking Brake Release to Service Position support
• Added XF and XK8 / XKR 07+ Driver and Passenger Door Module full bi-directional control support
• Improved ProLine hardware support (to include completing all System Tests)
• Improved sensor auto detection times by as much as 2x
• Fixed issue where SType and XType Generation 1 and 2 active commands should have been culled out from each other's lists and weren't
• Improved trouble code retrieval for SCP-based body controllers by requiring a History setting to get any codes.
Due to confusion with the JLR IDS not support any trouble code reporting for these controllers,
we now offer this support under the History setting to further distinguish that these are not current codes

Land Rover
• Added ProLine hardware support (Requires firmware 26+)
• Added Front Lighting Control Module CAN full system support
• Added MCAN full system support for Range Rover and LR3 models (Requires the ProLine hardware):
Audio Control Module
Body Control Module
HVAC
Park Aid Module
Remote Driver Utility Module
Tire Pressure Module

• Improved sensor auto detection times by as much as 2x
• Improved trouble code reporting by using new reporting model that shows No Response as well as trouble codes and no codes (Requires the ProLine hardware)

Mercedes
• Added Sprinter 906 '07' - '09 full system support (DME, EGS, EWM, SRS, SAM, ESP, RDK, etc.)
• Added missing LCP 208 and PSE 210 actuations
• Added missing UCP 164 actuations
• Added CLK Class 209 RDK (TPMS) system support
• Added C Class 204 OCP full actuation support
• Improved CLK Class 208 controller connectivity for non-CAN systems
• Improved trouble code reporting for a controller that responds longer then 1 second after the request (i.e., excessive trouble codes)
• Improved trouble code status type reporting to match Mercedes factory tool exactly (Stored, Event Stored, Current Stored, etc.)
• Fixed CLK Class 209 trouble code table not reporting descriptions
• Fixed CLK Class 209 Door Control Modules not connecting
• Fixed C Class 204 Steering Column Module and Door Control Modules not retrieving trouble codes or operating actuations

Nissan / Infiniti
• Fixed DDL2 BCM not showing PIDs for certain models

Porsche
• Added Cayenne DME SDI41'08+ full system support
• Added Cayenne DME DFI '08+ full system support
• Added 911 Turbo DME TOP '09+ full system support
• Added PDK Tiptronic CAN (Type II) full system support
• Added missing Cayenne Turbo DME ME71 actuations
• Added Targa Roof CAN full system support
• Added missing POSIP CAN Triggering Event sensors

• Added missing PASM CAN status bit sensors

• Added 987 and 997 Instrument Cluster Reset OnBoard Values system function support
• Fixed Tiptronic communications stability for all Cayenne models
• Fixed user-interface forcing a maximum of 8 PIDs for all controllers after selecting a DPID DME (ME78)

Subaru
• Added complete support for bi-directional controls for '99 - '09 vehicles (to include D-Check and non-D-Check commands)
• Added Air Conditioning CAN and Electronic Parking Brake CAN trouble code support for '09+ models
• Added TPMS full system support

Toyota-family
• Added PreCollisiion2 CAN full system support
• Added Linear Valve Offset Calibration for ABS CAN controllers
• Improved Body controller actuation for Door Locks by breaking them into a Lock and Unlock request to make it easier to use
• Fixed Rear Left, Rear Right, Passenger, and Driver Door CAN actuations not working

ScanTool Version 8.2.1
----------------------
General
• Improved Mode 6 retrieval for J1850PWM controllers (Requries firmware Version 26)

AE ProLine Firmware (Version 26)
• Improved J1850PWM communication
• Fixed Audi/VW communication issues on ISO-based modules

Audi / VW
• Added ABS, Airbag, Engine, and Transmission sensor descriptions for the '09 VW Jetta 2.0L diesel
• Improved ISO based-module communication support (Requries firmware Version 26)
• Fixed an issue where we failed to pull the VIN for VW
• Must select the Volkswagen Make before attempting to get the VIN

BMW / MINI
• Added more trouble code descriptions for late model BMW body controllers
• Added full FKA (Rear Heater and AC) sensor and bi-directional system support
• Added missing SZM (Switching Center Console) sensor and bi-directional system support for E60 models
• Added missing SMFA and SMFB (Seat Module Driver / Passenger) sensor support
• Added missing 530xi 06MY model support
• Improved Conditional Based Service Displaying in case of a failure to report from one controller; now that won't prevent the others from showing their results

• Improved VIN decoding for 10MY vehicles
• Fixed X5 '07 4.8l model not connecting to any system
• Fixed clearing trouble codes on the ZAE airbag when using the ProLine hardware

Chrysler-family
• Added a message after clearing codes that cycling the ignition key may be required to complete the process
• Fixed an issue where wheel speed sensors where missing for VPW-based ABS modules
• Fixed the Odometer reading in the Electronic Overhead Module for a '09 Dodge Ram

Ford-family
• Added Powerstroke 6.0L support for '08 - '09 Econoline models
• Added beta of Power Balance for V8 gas models and Powerstroke 6.0L (Requires ProLine hardware)
• Fixed Mode 6 support with ProLine hardware (Requires firmware Version 26)
• Fixed CAN ABS Tire Programming

GM-family
• Added a message to alert the user that Non-Powertrain modules can have their lights turned on for history codes and that you might need to check the History checkbox before pulling codes
• Resolved an issue where CAN communication gets out of sync when trying to initalize communication
• Resolved an issue where we were failing to perform a trouble code clear for Airbags

Hyundai / Kia
• Added Borrego '09 model support

Jaguar
• Added beta ProLine support (Some System Tests are not yet supported)
• Added VDP and XJ8 '96 - '03 RCM support (Requires ProLine hardware)
• Improved trouble code reporting by using new reporting model that shows No Response as well as trouble codes and no codes (Requires ProLine hardware)
• Improved System Test error handling by reporting more of the error conditions to the user

Mercedes
• Added a missing OCP 220 controller variant for early CL and S Class models

• Added a missing UCP 215 controller variant for early CL and S Class models

• Added missing Fan Operation, EGR Positioner, and Throttle Valve Actuator sensors support for CDI3 and CDI4 engine controllers
• Improved bi-directional control support by adding a error message for when the controller is in the incorrect diagnostics state to operate the request
• Removed warning if the connection or communication was not successful. Although helpful to the user, it disrupted the software's ability to recover the communications
• Fixed ML Class (163) EGS only reporting a single trouble code; added support for multiple trouble code retrieval
• Fixed CDI3, CDI4, and CDI5 controllers not pulling all the trouble code SubType information
• Fixed Sprinter 905 ABS/ESP trouble code list missing the ESP-specific entires
• Fixed ABS/ESP Pressure Sensor not reading correctly

Mitsubishi
• Improved CAN controller bi-directional support by adding large requests (i.e., Meter CAN)
• Improved all CAN controller trouble code clearing by restarting a controller
that has gone offline
Nissan / Infiniti
• Added missing FX50 to model support list

Porsche
• Added 10MY VIN decoding support

Toyota / Lexus / Scion
• Added missing Hardtop sensor support
• Added missing TPWS support to '06 Prius

ScanTool Version 8.2
----------------------
General
• Added a Please Wait message when we are setting up the DPID sensors
• Fixed retrieving CVN information from some GM models that exceeded the SAE alotted array size

Audi / VW
• Added 2k more trouble code descriptions
• Added error handling for baud rate issues (requires ProLine firmware 24)
• Added a message for users that wish to Clear/Retrieve DTCs from all system to inform them that it will take between 15-30 depending upon installed systems
• Improved module sensor information (sensor naming and coding information) for non-Powertrain Systems
• Fixed a bug when loading in AIF files where sensors were missing from sensor groups

BMW / MINI
• Added more trouble code descriptions for MINI DME and late model BMW controllers
• Added full Integrate Chassis Module DCAN system support
• Added SSH full sensor support
• Added full Satellite Door Module (SSBA and SSFA) system support
for E65 7 Series models
• Added full Lateral Moment Distribution (QVMH) system support for X6 iDrive E71 models

Chrysler-family
• Added EVIC for the '04 Jeep Grand Cherokee
• Added the following JTEC/SBEC tests:
• EGR System Test
• Purge Vapors Test
• Generate Full Field Test
• Leak Detect Pump Test
• EVAP System Monitor Service Test
• Torque Converter Clutch Test (JTEC Only)
• Gov & 3-4 Shift Valve Test (JTEC Only)
• Added an ABS system specific to 2 Wheel systems for CCD modules
• Fixed the actuation names in Cabin Compartment Node on CAN vehicles

Ford-family
• Added Powerstroke 6.4L ECM CAN and TCM CAN bi-directional controls
• Added MCAN GEM, DSM, and EATC bi-directional controls
• Added ECM CAN Diesel Particulate Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector & HP Pump Adaptive Tables support
• Added TCM CAN Reset KAM support
• Added Ford of Europe Galaxy and Mondeo body controllers that use the CAN 14229 protocols
• Added Tire Size Reprogramming, PATs Key Programming, and Injector Coding support for the ProLine hardware (ABS non-CAN Air Bleed is NOT ported at this time.)
• Fixed Freeze Support showing decimal values instead U and C Code DTC that Caused Freeze Frame when the faulting DTC was a U or C code

GM-family
• Added Saturn KWP module support (i.e., SL2 Engine)

• Added the Crank Position Sensor Status PID to the '01 Cadillac Seville
• Added Cylinder 5-6 to the '07 4.2L Chevy Trailbazer engine
• Added missing '09 body and chassis systems for models. This completes body and chassis coverage for these model years.
• Added a warning message that notifies users that selecting sensors could cause actuations to fail prematurely
• Fixed BCM issues sensor communication issues on a '06 Malibu

Honda-family
• Updated SRS94, SRS96, SRS99 diagnostic trouble code descriptions

Mazda
• Added full bi-directional control support for PCM CAN, 4x4 CAN, ABS CAN, and ABS ISO
• Added Failure Type reporting byte support for CAN 14229 controller DTCs
• Added support for retrieving and clearing trouble codes from All systems and not just Current
• Added Restraint Control Module Passenger Seat Weight Sensor ReZero support
• Added Self-Test support for Restraint Control Module and General Electronics Module
• Fixed Freeze Support showing decimal values instead U and C Code DTC that Caused Freeze Frame when the faulting DTC was a U or C code

Mercedes
• Added a missing LCP 209 CAN controller variant

• Added missing diesel CDI2 and CDI3 variant trouble codes descriptions

• Improved diesel powertrain connectivity by delaying the connection to allow for slower controllers to respond later

Toyota / Lexus / Scion
• Added Prius HV ECU and HV ECU CAN controllers Information Data # reporting
• Added full 09MY Main Body CAN system support
• Added full 09MY Driver Door Motor CAN, Passenger Door Motor CAN, Rear Right Door Motor CAN, Rear Left Door Motor CAN system support
• Improved ProLine hardware CAN PID data rates
• Improved ProLine hardware reading trouble codes and PID data from the Power Source Control, SMART, and AC System
• Fixed HV ECU and HV ECU CAN PID reporting with the ProLine hardware

ScanTool Version 8.1
----------------------
Audi / VW
• Increased module sensor information (sensor naming and coding information) for non-Powertrain Systems

Honda / Acura
• Added City model support
• Added '09 ABS support for the following vehicles:
• Acura TL
• Honda City
• Honda Element
• Honda Fit
• Honda S2000

Chrysler / Dodge
• Improved VIN retrieval by allowing all possible protocols to be tested
• Added Transmission Oil Temperature sensor to the '08 Chrysler 300 ECM
• Added '08 Dodge Challenger model support
• Added CCD-based system support for Biased Networks - (Requires ProLine Connector):
• ABS
• Airbags
• Body Controller
• Central Timer Module
• Instrument Cluster
• Transmission
NOTE: Check website for specific vehicles support
• Fixed the actuation test for Injector Kill test where cylinder 5 was labeled twice for the '00 -'05 Cummins
• Removed Chrysler SCI connector support

Ford-family
• Added ProLine hardware support (Except ABS Bleed, PATs, and Injector Coding; those will quickly follow)
• Added full MCAN controller support for ProLine hardware adding 23 new controllers for '05 - '09 (Requires ProLine hardware)
• Added full Electric Parking Brake and Battery Control Module support for Escape or Mariner Hybrid models
• Added CAN bi-directional support for ABS CAN, Ctrl4x4 CAN, ECM CAN, ICM CAN, and some TCM CAN etc.
• Added EVAP Test for CAN-engine model vehicles
• Improved bi-directional support by only showing the exact supported command lists for selected models

GM-family
• Improved VIN retrieval by allowing all possible protocols to be tested
• Added support for the Pontiac 3.8L L67 engine with a product line of 'H'
• Resolved text outputs for DPID sensors on the Generic OBDII connector
• Resolved ABS communication issues with a '04 Buick Century
• Fixed the Engine Code on Engine Type '97 6.5L L56 (F) to read '97 6.5L L56 (S)

Mazda
• Added ProLine hardware support (Execept Self Test and Passenger Rezero; those will quickly follow)
• Added full MCAN controller support for ProLine hardware adding 8 new controllers for '05 - '09 (Requires ProLine hardware)
• Added full Electric Parking Brake and Battery Control Module support for Tribute Hybrid models

Nissan / Infiniti
• Fixed '05 Titan and 350Z not showing enhanced systems

ScanTool Version 8.0.1
----------------------
BMW / MINI
• Added Battery Replacement Registration for N62-engine series models
• Added E38 735i model support

Chrysler-family
• Fixed actuations for Body Control Module and Front Control Module on '02 Dodge Grand Caravan models

Ford-family
• Improved Fuel Offset Table sensors support by expanding the reporting range

GM-family
• Added '09 Transmission support (Check website for detailed vehicle support. Terrain and Captive not implemented at this time)
• Added CKP Tests for '09-based vehicles (Check website for detailed vehicle support)
• Added '96 - '98 Product Line 'X' for the 3.4 Liter Light Truck Engine
• Fixed ABS communication on '03 Chevrolet S10 models

Honda / Acura
• Added translated trouble codes descriptions for SRS96 & SRS99-based modules
• Fixed the display format for the Tire Pressure Sensor ID; originally displayed the ID backwards

Hyundai / Kia
• Added Genesis Sedan 09 model support
• Added missing SRSES95910Rev53, SRSES95920Rev02 and SRSES95920Rev05 Crash Information
• Added missing Tiburon '05 - '06 Airbag support
• Added missing Sonata '99 - '05 Automatic Transmission support
• Added missing Sonata '06 - '06 BCM support
• Added missing Accent '03 - '04 ECM support
• Added missing Azera '06 - '09 BCM support
• Added full Powertail Gate system support
• Improved ProLine hardware support for EnhancedTransaxialES95485CAN and EnhancedPowertrainBoschCOM110CAN controllers by filtering non-supported sensor on a vehicle
• Improved ProLine hardware support for older ISO controllers

Opel
• Added 100 new trouble code descriptions

Porsche
• Fixed retrieving and clearing codes from older Airbag controllers with OBDII hardware

Toyota-family
• Added EACM CAN full system support
• Improved ProLine hardware support for older Phase3 controllers

SpeedTracer Version 5.0
-----------------------
• Added Porsche models to the Vehicle Profile list
• Added more BMW models to the Vehicle Profile list
• Added ProLine hardware support
• Improved MPG support by increasing maximum range to 75 MPG for higher-mileage vehicles
• Fixed DataLogging not storing the XML header required to view with a browser software

ScanTool Version 8.0
--------------------
General
• Added Windows 7 operating system support for ProLine hardware
• Added programming API for developers
(available online or on installation CD-ROM)

Audi / VW
• Added 2009 coverage
• Relabeled the Enhanced Powertrain system to Engine

BMW / MINI
• Added 2009 coverage (excluding F01 7 Series)
• Added Transmission SMG IV full system support
• Added HUD full system support
• Added more trouble code descriptions
• Improved DME ME9 MS60 bi-directional and added reset adaptations

Chrysler / Dodge
• Added 2009 coverage
• Added 1k new DTC descriptions
• Added ABS for the '06 Jeep Liberty 3.7L
• Resolved loss of communication after clearing DTCs on NGC-based modules

GM
• Added 2009 coverage (except transmission coverage)
• Added missing cylinders for '97 Tahoe
• Added GMC Terrain model support
• Added Saturn Astra model support
• Added 'Empty Fuel Tank' test
• Fixed transmission actuations for the '03 GMC Envoy
• Fixed Fuel Pump Relay actuation for the '07 Tahoe
• Fixed a missing transmission selection for the '04 GMC 6.0L Sierra 2500
• Fixed sensor communication issues for ICP and HVAC modules

Honda / Acura
• Added 2009 coverage

Hyundai / Kia
• Added 2009 coverage
• Added ProLine hardware support
• Added EPS ES95820 Rev02 CAN sensor support
• Added TPMS ES95800 Rev01-Rev04 full system support
• Added ABS ES95660 Rev38 full system support
• Added AT GS14 full system support
• Added SRS ES95920 Rev24 sensor support
• Added PODS Reset for SRS ES95920 Rev24 and ES95210 Rev88 systems

Isuzu
• Added 2009 coverage

Jaguar
• Added 2009 coverage

Land Rover
• Added 2009 coverage

Mercedes-Benz
• Added 2009 coverage
• Fixed ME2.0 Exhaust Temperature after TWC reporting to large of values

Mitsubishi
• Added 2009 coverage
• Added full Shift Lever CAN system support
• Added Steering Angle Initialization and Operation Test function support for ACD CAN systems
• Added Service Reminder PID support for '04+ models that use Meter 8408
• Added 09MY TPMS CAN support
• Improved ACD CAN system support by completing the PID list
• Fixed TPMS CAN system not reporting the first trouble code
• Fixed TPMS CAN system Tire Pressure Sensor ID Check function only showing the first ID

Nissan / Infiniti
• Added 2009 coverage
• Added ProLine hardware support
• Added DDL1 systems support for '00 - '09 models (Sentra and Versa AT controllers)
• Added full system list for all '05+ models to speed up connections instead of determining controller coverage
• Added BCM CAN 8 new trouble code definitions
• Added full EPS CAN system support
• Added full PSB CAN system support
• Added full ACC CAN system support
• Added full USM CAN system support
• Added missing ABS CAN live data support

Porsche
• Added 2009 coverage

Subaru
• Added 2009 coverage

Toyota / Lexus
• Added 2009 coverage
• Added ProLine hardware support
• Added TPMS, Air Suspension, and Air Conditioning systems support for the ProLine hardware

09/16/2009 7.4.1 Release:
-------------------------
BMW / MINI
• Added Base Module (GM) trouble code and bi-directional control support for MINI (R50/R51/R53)
• Added DSP system support for MINI (R55/R56/R57), E39 5 Series, and E53 X5
• Added full DME MS60 system support
• Improved EHC system support by completing the bi-directional list

GM
• Added missing sensor 'HO2S B2S2' for the '03 4.3L (X) engine support
• Fixed an issue with the Oil Reset for the '06 Trailblazer and '05 Envoy XL
• Fixed live data communication issues for single-wire CAN body controllers
• Fixed engine trouble code retrieval not working for some models with the 7.4 initial release

Mercedes Benz
• Fixed ASR controllers connection issues

09/04/2009 7.4 Release:
-----------------------
Audi / VW
• Added the module ID to the sensor name on the system list
• Added ADC Channel support for KWP1281 modules
• Added SRI function for KWP2000 modules
• Added auto baud rate detecting support to speed up initial system communication
• Added more internal module support
• Removed the ability to select all sensors as this feature is not supported by Audi systems
• Fixed reading group 0 sensors for diesel vehicles

BMW / MINI
• Added full MINI (R55/R56/R57) support
• Added full X6 xDrive 3.0i and BMW X6 xDrive 5.0i (E71) support
• Added 120d and 123d '05 - '08 (E8X) support
• Added 318i E46 DME N46 full system model support
• Added full EGS GM6 system support
• Added full ANT system support
• Added full AMP and AMPH system support
• Added full BO system support
• Added full EDCSHL, EDCSHR, EDCSVL, EDCSVR systems support
• Added full TMFA, TMBF, TMFAH, TMBFH systems support
• Added full ULF system support
• Added full VDM system support
• Added full VTG system support
• Added full TCU system support for the older E46 / E53 / E83 models
• Added more LSZ2 system trouble code descriptions
• Improved 316i DME N40/N42 sensor support
• Improved 1 Series body controller support to include Electronic Power Steering and SDARS
• Fixed M57 DDE 4.0 Rate of Main Injection and Capacity Voltage 1 and 2 sensors not reporting correctly

Chrysler / Dodge
• Added VPW-based OCM System Test
• Fixed an issue where Cylinders 7 & 8 didn't show for the Manual Injector Kill Test on SBEC/JTEC Controllers
• Fixed communication issues for Sprinter using the ProLine connector (Requires firmware version 17+)
• Removed duplicate DTC sensors for the Front Control Module VPW system

GM
• Added ABS Automated Bleed Routine (Requires ProLine Connector)
• Added text-based responses for VPW-based DPID sensors
• Added bitmaps and states for enhanced powertrain '96 - '97
• Added missing cylinders for the Cylinder Power Balance command for the '04 3.5L Colorado
• Added missing SRS support for the Chevy Malibu '04 -'05
• Added missing engine support for the '07 Sierra 25
• Improved the wrong connector message for when pulling DTCs to show the exact hardware required
• Fixed Fuel Pressure sensor read out for the 5.3L '07 Chevy Tahoe

Honda / Acura
• Added support to retrieve DTCs in case the transmission or engine controller serial number is not supported
• Added 500 more B and U DTC descriptions
• Improved Mode 6 descriptions '96 - '09
• Fixed an issue with failing to display VTM-4 DTC descriptions
• Fixed transmission engine coolant temperature sensor
• Fixed SRS DTC issues for '01 Honda Civic
• Fixed issue that if the code wasn't stored as a pending and as a history it would fail to report

Jaguar
• Added XType DuraTorq diesel Intake Air Temperature sensors support
• Added SType 2.7L diesel '05 - '08 full model support
• Improved trouble code retrieval on CAN controllers by allowing for out-of-order multi-packet responses
• Improved XType DuraTorq diesel Injection Coding Factor support by allowing more universal support for engines
• Improved all CAN systems support by adding the "No Data" response support when a controller NACKs the request
• Improved all CAN systems support by filtering sensors not supported by model

Mercedes Benz
• Added DME ME 97 full bi-directional control support
• Added EGS53 full system support
• Added C, CLK, E (missing 210), G, GL, GLK, ML, R, S, SL, and SLK Class full door and trunk system support
• Added Power Window Normalization support for Door Control Modules (DCMXXX) and on the LCP163 for 163 models
• Added DME CDI2 and CDI5 (diesel) full system support (to include Reset Quantity Mean Value Adaptation Data and others)
• Added UVS230C (Vario Roof) Denormalization functions for windows and remote trunk lid
• Added DME ME28 Reset Mixture Adaptation support
• Added SAMV164 bi-directional control support
• Added LCP163 full system support (to include Power Window Denormalization)
• Added missing Multimedia systems such as Satellite Radio, Universal Telephone, Navigation, etc.
• Added RDK211 Test of Signal Transmission system test support
• Added missing ABC Move Towards Calibrated Level system test
• Added ABC230 system to include Rodeo, Pitch and Move Towards Calibrated Level support
• Improved trouble code clearing for older systems by attempting the request after a delay in case of failure
• Improved DME CDI4 (diesel) full system support by including Reset Quantity Mean Value Adaptation Data and others)
• Improved ML Class ETS controller support to include a variation not documented
• Fixed RVC209 pre-CAN controllers connection issues

Subaru
• Fixed an issue accessing the Enhanced Powertrain system with the AE Enhanced hardware

Toyota / Lexus
• Added full diesel CAN EFI support
• Improved ProLine hardware support for PIDs and Actuations
• Fixed EFI CAN Water Pump actuation not working correctly on some Prius models

07/06/2009 7.3.2 Release:
-------------------------
Ford
• Added Powerstroke 6.4L missing EGR temperature and Short Term Fuel Trim PIDs
• Added PAM and 4x4 systems support to Powerstroke 6.4L

BMW / MINI
• Added '07 - '08 X3 full model support (requires ProLine hardware)
• Added Tire Pressure Monitor (RDC) for E39, E46, and E83 full system support
• Added Vario Transfer Gearbox (VGT) full system support
• Added ABS DSC 8 DCAN full system support (requires ProLine hardware)
• Added ABS DSC 8 Steering Angle Match support (requires ProLine hardware)
• Added ABS ASC 5, ASC57, and DSC 5.7 full bi-directional support (requires ProLine hardware)
• Added some MINI R56 model support (requires ProLine hardware)
• Added Replacement Battery Registration for V80 and D80 DME controllers
• Added ZKE 5.2 mirror bi-directional controls support
• Fixed MINI R50/R51/R53 IHKA, Cruise, and Immobilizer systems not retrieving trouble codes with ProLine hardware
• Improved trouble code descriptions for various DS3 and DCAN controllers

Jaguar
• Added missing SType '02 - '08 diesel support

Mazda
• Improved trouble code retrieval by showing "No Trouble Codes Retrieved" when ECM fails to respond as a consequence of having no codes stored

Mercedes Benz
• Improved connectivity to CAN controllers when generic OBDII is enabled. In case a diagnostic session level needed to be changed, the software now waits to allow the vehicle to timeout and allow the new session

06/24/2009 7.3.1 Release:
-------------------------
BMW / MINI
• Added IHKA E53 Transport and Sleep Mode support
• Added IHKA E38 full bi-directional control support (ProLine hardware only)
• Added LSZ full bi-directional control support (ProLine hardware only)
• Added Sliding Tilt Roof full bi-directional control support
• Added URS2 support to E36 models
• Added some missing Electronic Height Control state sensors
• Added oxygen sensor V sensor and clock fuel injector bi-directional control support to DME 5.2 M62
• Added oxygen sensor V sensor support to DME 5.2.1 M62
• Fixed IHKA E39 various sensor reporting issues

Jaguar
• Fixed Engine Coolant and Fuel Rail Temperature PIDs from having wrong calculated offset

Mercedes
• Added '00 - '07 Sprinter (Generation 1) model support
ABS full system support
Airbag full system support
Audio full system support
Central Locking full system support
EGS full system support
ESP full system support
EWM full system support
DME CR2 and CR3 full system support
HVAC full system support
Immobilizer full system support
KI full system support

05/11/2009 7.3 Release:
-----------------------
Audi / VW
• Added Q5 Model
• Added more Test descriptions

Aston Martin
• Added DB9 '05 - '06 enhanced engine support
• Added V8 Vantage '05 - '07 enhanced engine support

BMW / MINI -- (All updates are for ProLine hardware only)
• Added X5 E70 '07 - '08 powertrain and chassis model support
• Added DME MS V80 full bi-directional control support for '08MY vehicles
• Added DME MS D80 Reset Adaptation Values and Resetting LSV Values support
• Added E46 330i ZHP (Performance Package) full MS45 M54 support
• Added MS45 M54 missing mixture adaptation and oxygen sensor PIDs
• Added ABS MK20 Pressure Sensor and Transverse Acceleration Sensor Matching support
• Added ABS DSC 60PP full system support
• Added MS52 M44 all missing PIDs (Throttle sensors and Mass Air sensor) support
• Added Electronic Height Control full bi-directional control support
• Added Z3 1.9L full model support
• Added DME S54 and S62 EDK bi-directional support
• Added R50/R52/R53 MINI CVT transmission full bi-directional control support
• Added E9x Convertible Top Module system support
• Fixed CBS Reset of Engine Oil not completing successfully
• Fixed CBS Display function not working for 08MY DCAN vehicles
• Fixed DME MS52TU temperature PIDs not being scaled correctly
• Fixed R50/R52/R53 MINI CVT transmission systems from not initializing
• Fixed MS411 M52 Injection Signal to support high-resolution scaling to the second decimal place

Chrysler / Dodge
• Updated DTC descriptions for the following VPW-based Modules:
Anti-Lock Brakes
Body Control Module
Front Control Module
• Added VPW-based FCM Module coverage for the following vehicles:
'03 - '06 CS Body
'02 - '05 DR Body
'01 - '07 RS Body
• Added OCC support for the '06 and '07 Dodge Caravan and Grand Caravan
• Added a message for when users select the CrossFire
Chassis and Engine vehicle coverage is available if you purchased the
Mercedes Expansion by selecting Mercedes SLK Class with the same model year
NOTE: Body controllers are not available
• Fixed the displaying wrong units for VPW-based Transmission volume sensors

GM
• Added Bitmap and State sensor support for ABS and Automatic Transfer Case systems
• Fixed DTC retrieval issue for Transfer Case system
• Improved DTC retrieval speed when using the ProLine connector on VPW-based modules

Mercedes
• Added full 204 model body controllers support (TSLM, OCM, ORC, EIS, ZGW, DISP, IC, RBTMFX, PTS, HLMXT, CTCR, OCP [ROOF], [MRM] SCCM, HVAC, SAMF, and HU)
• Added UVS209 full bi-directional system support and resolved the connection issues
• Added EIS210 full system support
• Added OCP210 full system support
• Added SAMF210 full system support
• Added DME 2.8 Reset Sensor Adaptation support
• Added DME 9.7 Adaptations:
Reset Adaptation Values
Reset Cold Start Adaptation Values
Activate Fuel Pump
Learn Throttle Valve Stop
Teach-In Ethanol Portion
Reset Ethanol Teach-In Processes
• Added DME CDI3 full system support (to include Reset Quantity Mean Value Adaptation Data)
• Fixed EGS52 Reset Adaptations not working when one of the two banks didn't require a reset command
• Fixed PSE210 trouble code descriptions showing Unknown Trouble Code

Toyota / Lexus
• Added Reset Memory support to the EnhancedPowertrain non-CAN EFI system

05/11/2009 7.2.1 Release:
-------------------------
General
• Fixed Savable Configuration with enhanced expansions that required engine information to complete a connection
• Fixed the issue with error messages when failed to connect to a vehicle using the ProLine connector

Audi / VW
• Added 7k new DTC descriptions
• Added Bentley models support
• Updated VIN decoding for VW/Audi the following models won't decode fully because they use the same chassis codes,
decoded model is designated with [:
• [Passat], Passat CC
• [Jetta], GTI, Golf
• [A8], A8L, S8
• [A6], RS6, S6, Allroad, 100
• [A5], S5
• [A4], RS4, S4
• [A3], S3

BMW / MINI -- (All updates are for ProLine hardware only)
• Improved BMW data rates 4x by with ProLine hardware. Now response times are no longer fixed at 4Hz but can update with the speed of the vehicle's controller
• Added DCAN '08 enhanced support
• Added more DTC descriptions
• Added AIC/RLS missing Wipe Time and Thumb Wheel PID support
• Added EKP missing fuel pump speed PID support
• Added FZD full PID support
• Added LCMIII full bi-directional control support
• Added ABS DSC 5.7 full bi-directional control support
• Added ABS DSC Premium full PID, bi-directional control, and system test (Longitudinal and Lateral Adjustment) support
• Added Sliding Tilting Roof full support to MINI models
• Added MINI R50/R52/R53 IKE full bi-directional support
• Fixed MINI R50/R52/R53 IKE non-communication issues

Chrysler / Dodge
• Fixed issue with CAN Cummins where Cylinders 2-4-6 did not report during contribution test.
• Fixed the units on the sensor Real Time Clock sensor to read as Seconds instead of Minutes.
• Fixed DTC retrieval for VPW-based modules

GM
• Improved pulling current Non-Powertrain codes. We pull MIL lit and Non-MIL related code by default now
• Added bitmapped and state sensors for CAN-based Transmission modules
• Fixed an issue where for CAN vehicles bitmap sensors weren't reporting correctly
• Added support for multi-ECM responses in Generic OBDII for the ProLine connector
• Fixed Savable Configurations to support new enhanced expansions and fixed cars that required specific engine selections
• Changed the reporting of the DTC status to what the car reported it as not what the user requested to view

Honda / Acura
• Fixed an issue with clearing SRS codes getting stuck if the car is pending the clear request too long

Mercedes
• Added ASR Generation 1 system support
• Added ABC Rodeo, Roll, and Pitch functions
• Added AAC230 (KLA203) missing actuations and flap motor PIDs
• Improved ME28 actuations stability
• Fixed EGS failing to INIT on '96 - '00 E Class and CLK Class models
• Fixed ABC controller reporting only the first trouble code when multiple SubTypes are present

Porsche -- (All updates are for ProLine hardware only)
• Added 05-08 Cayenne Body DTC retrieval support

Subaru
• Added ABS support for Outback '05 - '08
• Added Outback VIN model decoding
• Fixed EnhancedPowertrain and EnhancedAutomaticTransmission not initializing during trouble code retrieval

04/15/2009 7.2 Release:
-------------------------
General
• Changed the warning message when unable to connect to reflect that the auto detection of the protocol failed instead of showing that the connection can't be established
• Fixed Freeze Frame number not being entered into the trouble code reports
• Fixed Freeze Frame reporting duplicates in the trouble code reports

Audi / VW
• Added Audi/VW Enhanced coverage:
Adaptation
Basic Settings
Coding II/Login (7-digit PIN/SKC not supported)
Freeze Frames
Login
Module Recoding
Long Coding
Soft Coding
Module Information
Module Sensor Mapping
Network Test
Output Tests - Automatic
Output Tests - Specific
Sensor Readings
SRI Reset

• Supported Features (CAN Vehicles):
Gateway List
Optical Bus Diagnostics - 3dB Attenuation/Standard
Transport Active/Deactivate Mode

BMW / MINI
• Added enhanced 3 Series (E90/E91/E92/E93) '06 - '07 full model support (Requires ProLine Connector)
• Added enhanced 5 Series (E60/E61) '04 - '07 full model support (Requires ProLine Connector)
• Added enhanced 6 Series (E63/E64) '04 - '07 full model support (Requires ProLine Connector)
• Added enhanced 7 Series (E65/E66) '02 - '07 full model support (Requires ProLine Connector)
• Added enhanced Z4 M Series (E85/E66) '06 - '07 MS70 S54 engine support
• Added Conditional Based Service (CBS) for E6X and E9X models
• Finalized VIN decoding for models to include determining the engine series
• Fixed 330Xi and 330Xd tables being swapped

Chrysler
• Improved NGC module-based actuations
• Added Linear EGR Solenoid actuation for NGC-based modules
• Added the following NGC tests:
Purge Vapor Tests
NVLD Force Monitor Test
Injector Kill Test
• Fixed an issue where clearing all DTCs for CAN-based vehicles was not being performed for all systems

Ford
• Added more Ford, Lincoln, and Mercury 04MY+ model support to setting the correct controller address when using PATs functions

GM
• Added Single-Wire CAN based modules (Requires ProLine Connector)
• Added bitmapped and state sensors for VPW-based Transmission modules
• Added CAN CKP Test support adding support for 33 more engines
• Added Glow Plug Control module support
• Added Injector Flow Rate Reprogramming for '06 Duramax 6.6 Liter
• Also added test to copy Injector codes from ECM to GPCM
• Also added test to copy Injector codes from GPCM to ECM
• Fixed an issue where barometric pressure reported incorrectly on a GMC Yukon '02
• Resolved the issue where the '08 tables, we showed the incorrect engine for the Chevrolet
Corvette 6.0L LS3 Engine

Honda / Acura
• Fixed communication issues with CAN based vehicles (Requires firmware version 30 update)
• Improved ABS Type 2 & 3 communication

Jaguar
• Added XF VIN decoding and Mode 6 support

Mercedes
• Added enhanced C Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced CL Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced CLK Class '97 - '08 full model support (Requires ProLine Connector)
• Added enhanced CLS Class '04 - '08 full model support (Requires ProLine Connector)
• Added enhanced E Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced G Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced GL Class '06 - '08 full model support (Requires ProLine Connector)
• Added enhanced GLK Class '08 full model support (Requires ProLine Connector)
• Added enhanced ML Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced R Class '06 - '08 full model support (Requires ProLine Connector)
• Added enhanced S Class '98 - '08 full model support (Requires the ProLine Connector)
• Added enhanced SL Class '98 - '08 full model support (Requires ProLine Connector)
• Added enhanced SLK Class '97 - '08 full model support (Requires ProLine Connector)

Nissan / Infiniti
• Add enhanced G37 support
• Changed O2 sensors maximum range from 2.55V to 1.25V

Porsche
• Added enhanced 993 (911) '95 - '97 ' full model support (Requires ProLine Connector)
• Added full live data and bi-directional support for 60+ controllers (Requires ProLine Connector)
• Adding system coverage for:
ABS 5
RollOver Protection
Tiptronic2
Park Assist
PTM
Tiptronic / PDK
Tiptronic Cayman
• Added new Cxxx trouble code entries
• Removed the need for 16pin adaptor with new ProLine Hardware (all except 911 993 models)
• Fixed PSM codes not reporting correctly

Toyota / Lexus
• Added new Phase4 ECM controllers Mode 6 descriptions
• Improved Mode 6 support for CAN models that reported packets larger then 64 bytes
• Fixed EnhancedPowertrainCAN Fuel Cut actuations not working

02/19/2009 7.1 Release:
-------------------------
Aston Martin
• Added '03 DB7 Vantage full model year support
• Added '07 - '08 DB9 enhanced powertrain coverage
• Added '03 - '06 Vanquish full systems coverage
• Added 'full Mode 6 support for DB7, DB9, and Vanquish models

Chrysler / Dodge
• Improved communication for AE Enhanced Rev 2 connectors on NGC-based models
• Added missing transmission entry for the '04 Dodge Interpid.
• Added the ability for the user to manually enter the Pinion Factor for VPW-based modules
• Added more 'EATX / JTEC Transmission Parameters' group sensors for '01-'05 JTEC engine controllerS
• Added Cylinder Contribution sensors for the '04 - '05 Cummins
• Fixed incorrectly showing the transmission system for the '01 - '02 Jeep Grand Cherokee 4.0 Liter
• Fixed an issue with the Cylinder Cutoff actuation for the '05 Cummins
• Fixed VPW-based Transmission modules where sensors were reporting Metric units instead of English

Ford
• Improved Powerstroke 7.3L ABS support by only showing the bi-directional controls used for this model
• Added all some missing IPATS sensors for the EnhancedPowertrain CAN system
• Fixed Powerstroke 7.3L ECM crashing during sensor retrieval
• Fixed F150 '01 - '03 Enhanced Powertrain missing IMRC Status sensor support

GM
• Improved Communication for GM CAN sensor retrieval
• Added VSES for Chassis '00 - '05 Passenger product line H, Buick and Pontiac
• Added VSES for '03 - '04 Cadillac D CTS
• Added Chassis controller support for '05 - '07 Cadillac STS product line D
• Added missing transmission for the 5.7 Liter L31 product line K Chevy 2500 '00
• Added missing Hummer H1 support from '04 and '06
• Added Workhorse support for Engine and Transmission for '06-'08
• Added Workhorse W20Series support
• Added Fuel Pump Control Module support
• Fixed issue where sensors in Power Steering Module on CAN vehicles did not report
• Fixed missing cylinders 7-8 sensors for the '96 G2500 VAN
• Fixed Rear Integration Module for '00 - '02 Passenger Vehicles with product line K
• Fixed issue with retrieving trouble codes on '06 CAN based Durmax Powertrain modules (requires AE Firmware 28)
• Fixed missing offsets '03 Instrument Cluster for Product Line T (requires firmware 29 update)

Honda / Acura
• Added missing System Test descriptions and operations instructions
• Added Civic 5 Door ABS specific support '06 - '08
• Added Crank Pattern Clear/Learn Test for CAN Specific Vehicles
• Added Tire Pressure Module System
• Added Accord '08+ based SRS module addressing
• Changed the ABS Sensor Calibration Test into a single test called 'Calibrates All Sensors'
• Fixed issue with Enhanced Powertrain sensors reporting incorrect data for '98 Accord
• Fixed issue with double sensors being shown for the '99 Honda Civic Enhanced Powertrain
• Fixed addressing issue for '05 Honda Accord Hybrid's which resulted in missing Enhanced Powertrain support
• Fixed sensor communication issues for IMA Motor Control System

Subaru
• Added Airbag full system support
• Added Occupant Detection System full system support
• Added Intergrated Unit Module full system support
• Fixed ABS controllers reporting garbage characters when no Status is reported with the trouble code

Toyota / Lexus
• Added missing ABS CAN PID support
• Improved Active Front Steering, DriverSeat, PassengerSeat, SlidingRoof, TPWS, Meter, Mirror Right, Mirror Left, Tilt and Telescope, BackDoor sensor support by implementing PID tables to remove sensors that are not supported by the current controller
• Improved all body controller data rates by handling the SystemBusy responses quicker
• Fixed TPWS ID 5 sensors not working
• Fixed trouble code retrieval from single CAN responses losing the last byte in the response
• Fixed ABS Steering Angle Sensor not reporting negative degrees

01/19/2009 7.0.2 Release:
-------------------------
• Fixed Emissions Reports not displaying the DTCs
• Added support for the AE Enhanced and ProLine hardware to support full CAN 6x Mode

12/29/2008 7.0.1 Release:
-------------------------
• Added '09 VIN decoding support for all makes
• Fixed SpeedTracer Help file not launching when F1 pressed
• Fixed SpeedTracer default settings not being installed

GM
• Added full Acadia model support
• Fixed VPW-based modules reporting Immature Codes with Current codes when using the AE Enhanced connector
• Fixed DTC retrieval for CAN-based modules reporting a single trouble code

Ford
• Improved Ford Crown Victoria '01 - '04 ECM PID list
• Fixed Ford Explorer upstream O2 sensor range reporting -32V - 32V to 0V - 1V

Jaguar
• Added Jaguar XK8 and XKR CATs full system coverage
• Added Jaguar XK8 and XKR Climate Control full system coverage
• Added Jaguar SType CATs full system coverage

Honda/Acura
• Fixed Honda connection issue with AT and CVT controllers

Land Rover
• Added Land Rover Freelander P1472 - P1475 codes

Mazda
• Added MazdaSpeed 3 and 6 VIN model decoding support
11/07/2008 7.0 Release:
-------------------------
• Added 153 new diesel sensors added with the SAE J1979 May 2007 update
• Added new EMD, HD OBD, WWH OBD, and OBD BR support added with the SAE J1979 May 2007 update
• Added NOx MID support added with the SAE J1979 May 2007 update
• Added VVT MID support added with the SAE J1979 May 2007 update
• Changed all Oxygen Sensor MID labels to Exhaust Gas Sensor as required with the SAE J1979 May 2007 update

Chrysler/Dodge
• Added full '08 MY support
• Added '96 - '99 Chrysler Neon support
• Added the Manual Injector Kill test for JTEC and SBEC controllers
• Added the ECU Reset system test for CAN-based modules
• Added Set Sync Signal system test for JTEC modules
• Improved the following systems for VPW
Amplifier
Body Control Module
Central Timer Module
Instrument Cluster
Occupant Classification Module
• Fixed an issue where in CAN systems they weren't reporting in KM when metric units where selected

Ford
• Added full '08 MY support

GM
• Added full '08 MY support
• Added the missing ECT and Actual EGR sensor for the '97 Cadillac Powertrain system
• Added Fuel Composition Learn Statu for the Ethanol vehicles
• Added the PSCM for Chevrolet and Pontiac product line A for '05 and '06
• Finalized the bitmaps sensor for the FAN, EVAP and AC sensors, '96 - '08
• Fixed an issue where only 6 cylinders and not all 8 reported for the '04 H2

Honda/Acura
• Added full '08 MY support
• Added Active Damper System full system support
• Added ATTS full system support
• Added ACC & CMBS System full system support
• Added Hydraulic Booster System full system support
• Added support for Freeze frame data for the Electric Vacuum Pump system
• Added a message when selecting a Honda Passport for the user to select it as an Isuzu Rodeo instead

Hyundai/Kia
• Added full '08 MY support
• Added Front Crash Information Status support
• Added Electric Power Steering CAN full system support including Calibration and Type Recognition (North America)
• Added Air Conditioning full system support
• Added Weight Control System trouble code support

Isuzu
• Added full '08 MY support

Jaguar
• Added full '08 MY support

Nissan/Infiniti
• Added full '08 MY support

Mazda
• Added full '08 MY support

Mitsubishi
• Added full '08 MY support

Porsche
• Added full '08 MY support

Subaru
• Added full '08 MY support

Toyota/Lexus
• Added full '08 MY support
• Improved OCC System sensor support to include new '08 sensors

10/13/2008 6.2.2 Release:
-------------------------
General
• Fixed Data Logging playback not playing XML logs

10/03/2008 6.2.1 Release:
-------------------------
General
• Improved the German translated versions
• Improved the Hungarian translated versions

AE Enhanced Firmware Updater
• Fixed issue with Chrysler communication that causes no sensor data to be retrieved on older SCI-based vehicles

Audi/VW
• Added Passat models VIN decoding support

Chrysler/Dodge
• Added Dodge Nitro model VIN decoding support
• Fixed an issue for clearing DTCs on older Cummins and SCI based vehicles

Hyundai/Kia
• Improved VIN decoding of engine series for all models
• Fixed ABS controller PIDs

Mazda
• Improved MazdaSpeed3 and MazdaSpeed6 sensor support

Toyota/Lexus
• Added ECT CAN Reset Memory system test
• Added VIN decoding for the '08 models
• Improved OCC System sensor support to include new 08 sensors
• Fixed OCC system sensor auto detection by removing unsupported sensors from the sensor list
• Fixed VGRS system sensor auto detection by removing unsupported sensors from the sensor list
• Fixed HV ECU system sensor support not working on the Highlander HV models

09/05/2008 6.2.0 Release:
-------------------------
General
• Added Save Configuration support for enhanced Honda
• Added Hungarian 6.X language support
• Improved SpeedTracer to version 4.1 which includes more vehicle examples, new graphics, and improved connectivety
• Fixed graphing issue where the live data was lost during the Print or Save message box

BMW/MINI
• Added E46 330d and 330xd, E39 530d, E38 730d, and E53 X5 3.0d full model support

Chrysler/Dodge
• Added full Anti-Lock Brakes EBC2 Module support
• Added Chrysler Captiva and Sport model support
• Added Chrysler HHR Panel model support
• Added '07 VIN decoding for the Dodge Durango and Nitro models
• Added ABS Brake bleed for the Mk25e module
• Improved coverage for Anti-Lock Brakes by adding mission actuations
• Improved coverage for Transmission Control Module by adding missing actuations
• Improved coverage for Transmission Control Module by adding System Tests Torque Converter Clutch Break-In, Speed Proportional Steering Test, Brake Tourque Test, Pump Test, and Pinion Factor Programming - Tire Size Programming
• Improved VPW-based controllers coverage Engine, Transmission, Airbag, and ABS systems by finalizing the coverage
• Added 517 new CAN-based system System Test support. Too include:
• NAFTA Diesel vehicle System Test Support: Activation of AC Anti-Slugging, Diesel Particulate Filter Initialization, Diesel Particulate Filter Learning, Fuel Mean Value Adaptation Routine, IMA Injector Programming, IMA Rapid Calibration, Instantaneous DPF Regeneration Routine, Manual DPF regeneration Routine, NOx Calalyst Learning Routine, NOx Catalyst Initialization
• 5.9 Liter CAN Cummins (CM849) vehicle System Test Support: 20 % Biodiesel Water In Fuel Kit, Cylinder Performance Test, Fuel Pressure Override Test, Generator Full Field Mode, Governor 3-4 Shift Valve Test, Idle Speed Set Point, Idle Up Enable, Injector Kill Test, Reset Duty Cycle Accumulators, Reset Trip Information Accumulators, Reset Aftertreatment Trip Info Accumulators, Reset NOx Adsorber Counts Accumulators, Throttle Valve Auto Zero, Throttle Valve Span, and Torque Converter Clutch Test
• 6.7 Liter Cummins (CM2100) System Test Support: 20 % Biodiesel Water In Fuel Kit, Accelerator Interlock Enable, Cylinder Performance Test, Exhaust Brake Enable, Fuel Pressure Override Test, Fuel System Run-Up Test, Generator Full Field Mode, High Pressure Fuel SystemTest, Idle Shutdown Enable, Idle Speed Set Point, Injector Kill Test, Injector Quantity Adjustment Routine, Mobile DeSoot - No Min Req'd Filter, Mobile PTO Enable, Mprop Fuel System Test, PTO and Idle Up, Remote Throttle Enable, Reset Accumulators, Reset Duty Cycle Accumulators, Reset Trip Information Accumulators, Reset Aftertreatment Trip Info Accumulators, Reset NOx Adsorber Counts Accumulators, Reset Regen Filter Timers, Reset Two-Stage Dump Valve Accumulators, and Switched Max Operating Speed Enable
• Moved Set Idle speed for SBEC/JTEC modules from Actuations to the System Test

Ford
• Added Ford of Europe complete diesel sensor support
• Added Ford of Europe Injector Control Module full system support
• Added Ford of Europe BCMii full system support
• Added Ford of Europe 1.8L and 2.0L TDCi model Injection Correction Factor coding support
• Added CAN Tire Size Programming for the 6.0L Powerstroke diesel
• Added IC CAN Module Configuration for select models (more coming)
• Improved Ford of Europe Focus, Mondeo, and Galaxy (petrol and diesel) model support
• Improved Ford of Europe S-Max, Ka, and Transit petrol model support
• Improved PATs Erase Program and security access support by reporting more error conditions

GM
• Added ABS dual-wire CAN full system support
• Added Body Controller dual-wire CAN full system support
• Added Electronic Brake Controller dual-wire CAN full system support
• Added Electronic Suspension Controller dual-wire CAN full system support
• Added Power Steering Controller dual-wire CAN full system support
• Added Trailer Brake Controller dual-wire CAN full system support
• Added Vehicle Stability Controller dual-wire CAN full system support
• Added support to re-direct vehicle selection for Toyota rebadged vehicles to the enhanced Toyota expansion
• Added GMC Typhoon model support
• Added missing EVAP, Air Conditioning, and fan state bit data for '96 - '01 models
• Added H3 Hummer '06 and '07 model support
• Added Impala '07 LS engine support
• Added Clear Taps System Test for Transmission

Honda/Acura
• Improved trouble code retrieval for CAN-based controllers

Isuzu
• Added full ABS system support for the Amigo
• Fixed actuation support for the Amigo

Jaguar
• Added diesel 2.0L TDCi full engine support for S-Type and X-Type models
• Added 2.0L TDCi model Injection Correction Factor coding support
• Added missing FETM (Audio Control Module) bi-directional controls

Nissan/Infiniti
• Added Enhanced Powertrain CAN bi-directional controls and Work Support support
• Added 4WD CAN full system support
• Added Air Levelizing DDL2 full system support
• Added Automatic Transmission CAN full system support
• Added RAS and HICAS CAN full system support
• Added BCM CAN variation 5, 7, and 8 full system support (including module configuration settings)
• Added Meter MA CAN full system support
• Added Adaptive Light CAN full system support (including Steering Angle and Leveling Alignment support)
• Added HVAC2 CAN full system support
• Added HVEC CAN full system support
• Added Lane Camera (LDW) CAN full system support
• Added Precrash Seatbelt CAN full system support
• Added Rearview Camera DDL2 full system support
• Added TPMS CAN full system support
• Added Rogue model support
• Added EX 35 model support
• Improved Automatic Transmission sensor support to include new bit states for later models
• Fixed some BCM controllers not updating live data because address variations between controllers

Mazda
• Added Premacy model full system support

Toyota/Lexus
• Added Avensis and Auris full model support

07/03/2008 6.1.0 Release:
-------------------------
• Improved datalogging playback by allowing the user to select the sensors from a data log to playback
• Improved Mode 6 update rates for both OBDII Interface and the AE Enhanced Interface by removing unnecessary sync requests
• Added German language support to the 6.0 series
• Added new DTC Model:
Added clear All, Current, None selections to allow customizing of which controllers to clear from
Added enhanced Freeze Frame support for Ford and Mazda CAN ECMs
Improved Freeze Frame naming conventions to allow for certain makes to label as necessary. Such as GM to label some as Failure Records
Now supports reporting Freeze Frame progress on DTC screen
Now shows each controllers progress after completion. Whether there is trouble codes, no trouble codes, or no response from the controller
Non-OBDII-Only no longer retrieves generic trouble codes
• Fixed installation not updating the color scheme to the newest
• Fixed Mode 6 reporting for CAN models where the vehicle manufacturer would not clear out previous data from subsequent responses and this data was displayed as repeating Mode 6 entries
• Fixed datalogging playback issue where illegal characters in the sensor names prevented the file from parsing correctly or not at all

BMW / MINI
• Added Cooper '07 Convertible R50/R52 enhanced system support
• Added more VIN decoding for the new models
• Added SMG II system tests: Teach In Clutch Slipping, Teach In Clutch Characteristic Curve, Teach Clutch Values, and Longitudinal Acceleration Sensor Offset
• Improved DME M44 system support by adding actuations and resolving various sensors
• Improved trouble code reporting by removing the SAE designations (for example FC50 will no longer report as P1050 but simply as FC50)
• Fixed ABS DSC 8 connection issues which caused some controllers to require multiple attempts to clearing trouble codes or report live data

Chrysler
• Added Tire Size programming (CAN models)
• Added more body and chassis actuations
• Fixed the engine module settings for the '07 Chrysler Town and Country
• Fixed the engine module settings for the '07 Dodge Caravan and Grand Caravan

Ford
• Added enhanced CAN freeze frame support
• Added Tire Size configuration support for Powerstroke 7.3L '99 - '03 models
• Added network test for non-CAN controllers
• Changed STFT CAN sensor to range from -25 to 35 instead of displaying as stochiometric 0 - 2.0%
• Changed all RPM sensor ranges to 8000 or less
• Changed all MAF sensor ranges to 655.35
• Fixed missing Mode 6 translation for TID 4c and 31
• Fixed Keyless Entry Code not showing values in Meter or Graph tabs
• Fixed STFT and LTFT from not being list in some case

GM
• Added '06 Chevy Uplander ABS System
• Added '06 - '07 7.0 Liter LS7 engine
• Improved model selection by adding support for transfer case outside of the transmission field
• Fixed issue with missing sensors for BCM controllers
• Fixed the Left Rear and Right Front wheel speed sensor in ABS being flipped for '98 - '00 Oldsmobile
• Fixed issue with missing sensors for BCM controllers
• Fixed the air pump relay command for the '01 Trailblazer
• Fixed an issue where the Camaro was miss-IDed as a light truck
• Fixed Fuel Pressure Actuation for the 2006+ Duramax trucks
• Fixed missing sensors for certain BCM controllers

Honda
• Added CAN system bi-directional controls
• Added ABS Type 4 system tests and actuations
• Added a check to verify that the selected ABS module requires using the body/chassis cable before displaying the reminder
• Added OPDS and SWS Initalizations
• Fixed issue with the IMA system for the '04 Civic Hybrid

Hyundai/Kia
• Added 4WD system support
• Added EnhancedTransaxialMELCO bi-directional control support
• Added Misfire and Fuel Trim PIDs to Bosch COM 1.1.0 ECM
• Added EVAP Leak Test Bosch COM 1.1.0 ECM
• Added EVAP Leak Test Siemens 655 Rev 17 18 and 19 ECMs
• Added EVAP Leak Test Siemens 670 CAN ECM
• Added Throttle Position PIDs to Bosch COM 1.1.0 and Siemens 670 ECMs
• Added warning messages to failed bi-directional controls
• Added Sportage '05 - '07 ABS HTC Brake Bleed support
• Added Steering Angle Alignment and Variant Coding support for ABS ES95660Rev32 controllers
• Added Spectra 07 2.0L model support
• Fixed Sportage 2.7L airbag not communicating

Isuzu
• Release enhanced for '96 - '07 including engine, ABS, TCM, and airbags
• Added another 2k trouble code descriptions

Jaguar
• Added Active Dampening Ride Control system support
• Added more body trouble code descriptions for Ford-based models
• Improved trouble code reporting by showing all trouble codes, instead of removing the duplicates
• Fixed XK8 and XKR '97 - '06 Downstream O2 Bank 1 and 2 Voltages scaling issue
• Fixed SType '05+ Park Aid Module trouble code retrieval failing to retrieve single trouble codes

Land Rover
• Added TCM Adaption Reset support to Ford-based models
• Added more body trouble code descriptions for Ford-based models
• Added support for No Data text response to be displayed when the vehicle responds with a valid response that data is unavailable as opposed to reporting a zero value
• Improved trouble code reporting by showing all trouble codes, instead of removing the duplicates
• Improved trouble code retrieval from RCM CAN controllers by retrying in case of System Busy response. Vehicles that have a crash condition can delay their response outside of the normal time frame. Longer timing is sometimes required to resolve retrieving the trouble codes

Mazda
• Added full support for all Protege '00 - '03 transmission sensors
• Added enhanced CAN freeze frame support
• Added Throttle Position - Volts, Battery Voltage, Shift Solenoid 3, and EGR Steo Motor Status 1-4 sensors on Ford-based SCP ECMs
• Fixed Barometric Pressure - HZ reporting incorrectly on Ford-based SCP ECMs
• Fixed STFT and LTFT from not being list in some case
• Fixed missing Mode 6 translation for TID 4c and 31

Mitsubishi
• Added full VIN decoding for all models
• Added new CAN Mode 6 support
• Added Enhanced support 96-07
System Tests:
ECU Information (ALL CAN)
EVAP Leak Test (MFI CAN)
EVAP Leak Monitor (MFI E200, E400, E500, E600, E1400, E1600 Series)
Gas Emissions Test Mode and Sensitivy Check (ABS CAN)
Zero Calibration (some OCM CANs)
Service Interval Reset (Meter CAN)
Tire Pressure Sensor ID Check (TPMS CAN (Front Only))
Lateral G Sensor Calibration and Air Bleed (ACD CAN)

Nissan
• Added more ABS trouble code descriptions
• Improved Airbag Self-Diagnosis to now show the trouble code description Freeze Frame

Porsche
• Improved trouble code retrieval on late model Cayenne models

SMART
• Added VIN decoding

Subaru
• Fixed Rear O2 Voltage scaling
• Fixed Historic trouble codes being displayed with Current codes

Toyota
• Improved EVAP bi-directional controls instructions

04/12/2008 6.0.2 Release:
-------------------------
• Added support to prevent the use of the "Non-OBD-II Only" Vehicle Initialization Type without a Vehicle Protocol selection.

BMW
• Changed scaling on DME S54 / S62 for Multiplicative and Additive Adaptations to allow for negative values
• Added ABS Bleed support for E46 M3 '03+
• Added Steering Angle Adjust, Lateral Acceleration, and Pressure Adjust support for E46 M3 03+
• Fixed 528i '00 ABS controller module determination

Chrysler
• Added ABS Mk25e DTC descriptions
• Improved VIN decoding to support Wrangler '06 model
• Fixed the unit conversions from mmHg to inHg

Ford
• Fixed Taurus and Taurus X coverage tables being swapped
• Fixed retrieving trouble codes on Lincolns not completing or crashing the software
• Added missing Mercury Cougar '98 enhanced powertrain support

GM
• Improved error handling for the CKP Relearn Test by decoding the error conditions for the user
• Fixed CAN trouble code retrieval from Generic Powertrain when receiving multi-address responses, when using the AE Enhanced connector
• Fixed some product lines not being displayed for '96-'97 light truck vehicles
• Fixed Fuel Level sensor reporting and lack transmission system support for the '97 Chevrolet Lumina
• Fixed H2 Hummer '04 model lacking enhanced systems support
• Fixed an issue where enhanced powertrain was not available for a '06 Saturn ION Level 2
• Fixed the Current Misfire #1 and #2 for '01 GMC Jimmy
• Fixed Purge EVAP Solenoid actuation for '03 GMC 2500

Honda
• Improved SRS '06 system communication stability
• Added CAN actuations for Engine, Transmission AT/CVT, and IMA Motor Type D
• Added the SRS '03 trouble code support to the DTC tab
• Fixed CAN trouble code retrieval from Generic Powertrain when receiving multi-address responses, when using the AE Enhanced connector
• Fixed CAN Powertrain MAP sensor unit not reporting in kPa/PSI

Hyundai / Kia
• Added Tiburon '98 - '02 TCM support

Nissan
• Fixed trouble code failing to clear if the preceding controller failed to initialize

Toyota
• Fixed IAC Duty bi-directional control sending the command at 1/10th the requested value

03/20/2008 6.0.1 Release:
-------------------------
• Added a text limit to the activation entry fields to prevent too many characters per field
• Added Spanish version support
• Added support PDA Dual mode activation without being connected
• Fixed XML file playback not working with some files

BMW
• Improved EGS GS20 trouble code description coverage
• Added status byte support for EGS8.32, EGS8.34, EGS8.60.2, EGS8.60.3, and EGS8.60.4 transmissions
• Added X5 3.0i DME MS45 SULEV engine series support for '05 models

Chrysler
• Improved speed retrieving trouble codes on VPW-based Body/Chassis systems
• Added the English units '03-'05 for the following sensors to read in PSI
HPCR Fuel Pressure
HPCR Fuel Pressure Setpoint
• Fixed actuation issues for the Jeep Liberty Diesel
• Fixed Min and Max values on some sensors for Jeep Liberty Diesel models
• Removed the test to list only actuation support for specific vehicles. This test
caused some actuations to not show up on vehicles when they where in fact supported

Ford
• Improved Non-CAN and CAN auto detecting sensor times by as much as 2x times
• Added Keyless Entry reporting support for RAP, GEM, REM, CEM, DDM, and PDM
• Added Air Bleed variation for '01 - '03 Explorer models
• Fixed Powerstroke 6.4L '08 coverage being not available
• Fixed system tests not showing for all Lincoln and Mercury model vehicles

GM
• Improved the speed of system availability test
• Added Buick Terraza and Pontiac Torrent model support
• Fixed H1 Hummer incorrectly showing a warning message that sensors are not supported
• Fixed '05-'07 Saturn system options Truck/SVU vehicles
• Fixed missing '4 Speed' transmission for the '99 GMC Serria

Honda
• Fixed Body Electronic-based actuations not working
• Improved retrieving trouble codes for the following systems:
ABS Type 1, 2, & 4
VSA Type 2
Engine
Automatic Transmission
CVT Transmission

Infiniti
• Added EX35 model support

Isuzu
• Added Isuzu i290 & i370 model support

Jaguar
• Fixed Supplimental Restraint Module for XKR '97+ not being present in supported module list
• Fixed XKR '01 ABS Right Rear Wheel Speed sensor incorrectly updating when Right Front was operated

Mazda
• Improved CAN auto detecting sensor times by as much as 2x times

Scion
• Added xD model support

Subaru
• Fixed connection support with some Subaru models. Requires AE Enhanced Firmware 24 to resolve

03/3/2008 6.0 Release:
-------------------------
• Improved hi-resolution graphing support with such features as:
+ Virtual buffer that can store hours of data
+ Full pan/zoom support
+ Full 32-bit color support with 16.7 million color and anti-aliased plots
+ Visual trigger support to show when a data reading has exceeded the range allowed
+ Live data mouse-over support to report plot values
+ Plot color-coded legend and units
+ Print graphs while including shop and vehicle information
+ Saves screen captures in BMP, JPG, GIF, and PNG

• Improved user-interface responsiveness by eliminating any pending vehicle requests when a tab and is changed. Now when changing from a Live Data tab to the DTC, Test OnBoard, or OnBoard Test Results the delay will be reduced

• Improved connection times by testing faster protocols first. Saves 7 to 10 seconds on a new model vehicle's connection time, while only introducing a few milliseconds to the slower protocol vehicles

• Improved trouble code retrieval by only pulling generic OBD-II trouble codes when working on a powertrain system. This allows for trouble code retrieval with "Current" selection and non-powertrain systems to retrieve almost instantly

• Improved access to technical support logging by adding a button to the Technical Support window to View Log from within the ScanTool software

• Improved new enhanced activation support that uses hexadecimal numbers to allow for easier entry. Also, the activation code process has been streamlined to a single screen on the software

• Improved documentation by adding hypertext links to the ScanTool User Guide to allow for quicker navigation of the document

• Improved WBO2 sensor setup time on the O2 tab by preventing the Mode 5 data stream from being retrieved, as they don't support this

• Added full support for the '07 model year on all enhanced options (except BMW models). To include GM CAN, Nissan CAN, and Toyota CAN systems support

• Added support to show "No Data" in cases where the vehicle positively responded that it lacks support for the request
• Added hi-resolution Vista icons
• Added new connection animation
• Added printing support for playback data streams
• Added support for data logging initial filenames that follow the naming conventions of MAKE-MODEL-YEAR-mmm-dd-yyyy
• Added new Initialization Type "CAN Force Physical Addressing" to force the CAN 11Bit physical addressing for some vehicles that do not correctly support functional addressing ('08 Nissan and '08 Subaru)
• Added a wait cursor to show the time required when clearing trouble codes
• Fixed data logging issue where Excel defaults to numerical values in the first column and clips the time entry
• Fixed VINs not being retrieved from KWP2000 vehicles that would allow the transmission controller to report NACK while the ECM subsequently reports the VIN (i.e., BMW M6 and 6 Series)
• Fixed Mercedes KWP2000 connection issues where the controller ID is 0x01

BMW
• Improved data throughput on DME controllers by pre-sorting the sensor list into data groups
• Improved bi-directional control support by reporting the error code reported from the
controller should the request fail
• Improved Engine MS45 M54 controllers sensor coverage
• Added EGS model auto detection no longer requiring the user to select the correct model
• Added ABS DSC8 full systems support (excluding Steering Angle Calibration)
• Added X53 '04 - '06 X5 4.4L and 4.8L full systems support
• Added X83 '04 - '06 X3 2.5L and 3.0L full systems support
• Added 320i '02 - '05 full systems support
• Added URS and AIC Rain Sensor systems support to supported MINI models
• Added Electronic Height Control sensor support to supported X5 models
• Added support to deactivate actuations on DME ME8 controllers that were missing this support
• Added DME 5.2.1 M62 status byte support
• Added ABS MK60 and DSC8 status byte support
• Fixed ASC / DSC III Brake Pedal Pressure and Wheel Speed Sensors incorrectly scaled
• Fixed ABS MK60 failing to clear trouble codes
• Fixed 325i '03 DME not connecting because of incorrect DME tables

Chrysler
• Improved body and chassis trouble code retrieval by moving from the sensor list to the DTC tab
• Improved bi-directional control support by reporting the error code from the controller should the request fail
• Improved the speed of VPW-based Body/Chassis sensor auto detecting
• Added full CAN actuation support
• Added ABS CAN Brake Bleeding support
• Added ABS support for '05 Dodge Cummins
• Added ABS actuations support for VPW-based versions
• Added ABS Bleed Brakes for VPW Modules EBC325 and MK20e
• Added 3.0L engine support for the '01 Dodge Stratus
• Added '96 - '98 Dodge Neon 2.0L model support
• Added NGC-based system test: Module Reset
• Fixed NGC-based actuations not completing in some cases
• Fixed '03 Cummins communication issues with AE Enhanced Firmware V.23

Ford
• Added Ford of Europe Focus CMAX model support
• Added Electronic Controlled Power Steering CAN full system support for '07+ models
• Added Steering Angle and Yaw Rate and Acceleration Sensor reset for IVD equipped '03 Explorer and Lincoln LS models
• Added support to remove all system tests not supported by the Powerstroke diesels making correct selection easier

GM
• Added CAN powertrain systems support (requires new AE Enhanced to support this feature). (Body and chassis systems are coming with a single-wire CAN hardware solution later this year.)
• Added missing Envoy XL system entries
• Added for the 2002 Rendezvous 3.4L: Engine Oil Pressure Switch and Engine Oil Level Switch
• Fixed fuel trim precision to 2 decimal places
• Fixed for the '97 & '98 Oldsmobile key fob status sensor
• Fixed issue with some vehicles which have 'All' as the only transmission types when there are in fact transmissions available
• Changed GM module information sensors by moving them to the Vehicle Information dialog

Honda
• Improved SRS system detection support
• Added complete system support for:
+ ABS Type 4
+ ABS Type 3 (Ridgeline and MDX models)
+ IMA Motor
+ IMA Battery
+ Drive By Wire
+ Electric Vacuum Pump System
+ SWS
+ OPDS
+ Multiplex Integrated Control Unit
+ Relay Module
+ Rear Junction Unit
+ Multiplex Integrated Control Unit DR
+ Multiplex Integrated Control Unit AS
+ Power Window Module
+ Power Tail Gate
+ Power Slide Door Left ECU
+ Power Slide Door Right ECU
+ Driver Door ECU
+ Meter Module
+ Center Panel Module
+ Combination Switch Module
+ Center Panel Module
+ Auto Light ECU
+ Adaptive Front Lighting System ECU
+ Smart Entry ECU
+ Telematics ECU
+ Hands Free Telephone Module
+ Memory Seat Control Module
+ Immobilizer Module
+ Center Panel Module
+ Honda Information Platform ECU
+ VTM-4
+ SH-AWD
• Added support to display a warning if the Honda Body and Chassis cable is necessary for proper operation
• Fixed issue with engine actuations not working with 5.4.1 release

Hyundai/Kia
• Added '96 - '00 Elantra ABS and airbag full systems support
• Added '99 - '00 Elantra transaxial full system support
• Added EVAP Leak Test support for Siemens 670 Rev 8 ECMs
• Fixed '01 Sonata 2.5L V6 ECM not connecting

Jaguar
• Added '95 - '97 UK version of the XJR systems support
• Added '08 U Code additions
• Fixed SType '00 - '02 Restraint Control Module code retrieval failing with Current only selection SType
• Fixed SType '02 Mode 6 information not being translated

Land Rover
• Added LR2 model full systems support
• Added Restraint Occupancy Sensor Control module full support
• Added Status Byte support when reporting trouble codes for late models
• Added '08 U Code additions

Mazda
• Improved ABS sensor support to include Yaw Rate, Steering Angle, and Lateral Acceleration sensors
• Improved Restraint Control Module sensor support to include all fault state sensors
• Added Restraint Control Module support for RX8 '03 - '07 models
• Added Occupancy Supplemental Module support for all supporting '07 - '08 models
• Added ABS IVD Initialization (Lateral Acceleration and Yaw Rate Reset)
• Added ABS CAN IVD Initialization
• Added Restraint Control Module CAN Passenger Weight ReZero
• Added GEM CAN full system support
• Added Mazda CX9, Mazda2, Speed3, and Speed6 model support
• Added network test for CAN-based systems
• Fixed MPV '03 enhanced powertrain using the wrong protocol to communicate

Nissan
• Added CAN powertrain and CAN automatic transmission full systems support
• Added support to show a wait cursor while retrieving the systems supported by vehicle

Porsche
• Added generic OBD-II sensor support within enhanced powertrain systems

Subaru
• Fixed enhanced powertrain systems not enumerating on certain models

Toyota
• Added Airbag SRS CAN full system support
• Added OCC Generation 2 full system support
• Added ABS CAN system actuations support
• Added ABS CAN system tests Signal Check, Reset Memory, Inspection Mode, and Test Mode support
• Added EFI, Airbag SRS, and ECT CAN system tests Check Mode support
• Added EFI CAN Reset Memory system test support
• Added support to remove sensors from the supported list based on the vehicle engine configuration. E.g. Misfire Cylinder 5 sensor on a four-cylinder vehicle
• Fixed OCC Sensitivity Check system test not exiting if a different tab was selected
11/31/2007 5.4.1 Release:
-------------------------
General
• Fixed playback on the graphing screens where second plot uses the range of the first plot

GM
• Added the subwoofer actuation for the '02 Seville
• Added '04 GMC Canyon LT 3.5 Liter L52 to include the 5th Cylinder and added two Transmission 4WD
• Added Cruise Control PIDs for '01 Duramax
• Improved Hummer support to help decode the engine, also added entries specifically for Hummers
6.5 Liter L65 (Z) - Medium Truck data stream
6.5 Liter L65 (F) - Medium Truck data stream
• Fixed the minimum and maximum ranges for the 3x, 18x, 24x crank shaft sensor

Honda
• Added EAT support based on vehicles module ID
• Fixed Generic Powertrain not being present if Enhanced support is activated

Nissan
• Fixed BCM not connecting or failing to communicate once connected
11/14/2007 5.4 Release:
-------------------------
General
• Improved Clear trouble code request warning when the vehicle refused or was busy
• Improved Vehicle Selection window to show the required GM VIN characters when selecting engine and product lines
• Added a warning message to alert that using Non-OBD-II Only with Generic Powertrain is not possible
• Fixed Cubic Inches to Liter conversions

Audi/VW
• Added Mode 6 decoding for '04+ models

BMW/MINI
• Added support for M52 clearing individual adaptations types instead of only clearing all
• Fixed naming conventions for M52 Adaption sensors to correctly follow BMW naming

Chrysler
• Added support for Dodge Neon '96 - '98
• Improved error handling for system tests
• Fixed '06 Caravan with multiple engine type entries
• Fixed retrieving and clearing transmission trouble codes
• Fixed Battery Voltage and Water in the Fuel sensor readings on the CM551 Cummins module '99-'02

Ford
• Added PATs programming to support master key coding
• Improved the PATs programming to show any alert if security access is denied
• Improved ABS CAN system support on Explorer models with AdvanTrac
• Fixed typographical errors in PATs programming instructions
• Fixed Coolant Temperature sensor reporting C for F unit of measure

GM
• Added Holden vehicle support
• Added TDC Offset for the 6.5 Liter L56 (S) '96 Truck
• Added a check to see if the currently selected actuation might collide with the currently selected actuations. If it might then a message is prompted to inform the user that the previous actuations may be affected by this selection
• Added transmission bits and states for the '04 Chevy Impala
• Improved error handling for system tests
• Fixed Air Pump relay actuation for '01 Yukon
• Fixed Purge Solenoid for a GMC Yukon 5.3 Liter '00
• Fixed improper engine code for engine string 3.5 Liter LX9 from L to 8
• Fixed missing transmission type for the '02 Chevy Blazer: '4 Speed'
• Fixed minor BCM support issues for some passenger vehicles
• Fixed scaling issues for the Spark sensor on the 3.1 Liter and 3.8 Liter Impala engines

Jaguar
• Added X300 '96 and '97 model year support
• Added XJ12 '95 and '96 TCM system support
• Added SType '99 - '02 PTEC PATs key status sensor support
• Fixed SType '03 and later ABS sensor list showing 22 possible parameters not 42

Honda
• Added Honda CAN support
• Added transmission type selection to allow for the specific transmission support system
• Added ABS Type 1 Actuations:
Front Left Apply and Damper Solenoid Valves
Front Left Solenoid Valves
Front Left TCS Solenoid Valves
Front Left VSA Solenoid and Rear Right IN Valves
Front Right Apply and Damper Solenoid Valves
Front Right Solenoid Valves
Front Right TCS Solenoid Valves
Front Right VSA Solenoid and Rear Left IN Valves
Rear Left Solenoid Valves
Rear Left VSA Solenoid and Front Right IN Valves
Rear Right Solenoid Valves
Rear Right VSA Solenoid and Front Left IN Valves
Sub Throttle Valve
Air Bleeding For Repair - (ABS, TCS, VSA)
• Improved the speed of determining ABS system support
• Improved VIN decoding
• Improved error handling for system tests
• Changed system DTCs to the DTC Tab for Engine, Transmission, ABS Type 1, and ABS Type 2
• Fixed some auto detecting issues for SRS03 and SRS06 systems
• Fixed engine and transmission detection issues on some vehicle (ie. Honda Element 2004)

Hyundia/Kia
• Added Elantra and Sonata '05 - '06 2.0L engine and transmission full system support
• Fixed Optima 2.5L support incorrectly using 2.7L ECM series

Mazda
• Added KAM Reset for supporting non-CAN models
• Improved ABS support for '98+ non-CAN controllers by including all valve sensors
• Improved DTC retrieval for '98 non-CAN controllers

Subaru
• Added a test to verify that the latest firmware is being used with enhanced Subaru support

Toyota
• Added HV ECU and HV Battery for '01 - '03 Prius full system support
• Fixed EMPS Steering Angle Velocity showing an incorrect value if the reporting value was a negative

Porsche
• Added enhanced trouble code support 911 ('99-'07), Boxster ('97-'07), Cayman ('06-'07), Carrera GT ('005-'06), Cayenne ('03-'06)
• Added VIN decoding support ('03+ models are equipped with this support)

09/14/2007 5.3 Release:
-------------------------
General
• Added support to watch for hardware being disconnected or loss of power
• Added Audi/VW VIN decoding support
• Improved serial number retrieval support so as to avoid the 0-XX IDs being reported by some customers
• Fixed connection issues with some late model Audi/VW and Mercedes vehicles
• Fixed data rates suffering because KWP2000 vehicle's transmission controller responds with a NACK

BMW
• Added Convertible Top Module (CVM2) sensor support
• Added IHKA E53 sensor and bi-directional control support
• Added IHKA E39 bi-directional control support
• Added RollOver Sensor 2 (URS) sensor support
• Fixed MK60 ABS controllers not enumerating properly with some Dell laptops
• Fixed ZKE power window bi-directional control support

Chrysler
• Added Dodge Charger 2.7L '06 engine support
• Added the following sensors for the '96 JTEC sensor list:
Throttle Position Minimal
Governor Pressure Actual
Governor Pressure Target
Present Gear
Overdrive Off Lamp
Overdrive Switch
Throttle Position
Output Shaft Speed
Governor Pressure Duty Cycle
• Added the following sensors for the '97-'00 JTEC sensor list:
3-4 Shift Solenoid
Governor Pressure Actual
Governor Pressure Target
Governor Pressure - Volts
Governor Pressure Duty Cycle
Present Gear
Output Shaft Speed
Overdrive Off Lamp
Overdrive Switch
Throttle Position
• Added the following sensors for the '99-'00 JTEC sensor list:
Desired TC Clutch
Transmission Temperature
Transmission Temperature - Volts
• Added engine VIN code decoding
• Added Transmission support for '02 300M
• Added PSI Units for the '05 Cummins HPRC sensors
• Improved Cummins '06 engine sensor pulling. This removes the appearance that there is no communication with the vehicle when large blocks of sensors are selected. However this also will slow down thru-put on single sensor selections
• Improved DTC retrieval from SBEC and JTEC controllers
• Fixed '02 - '05 Cummins communication issues. (Enhanced Connector firmware version 19 upgrade required.)
• Fixed typo for the '05 Cummins 5.9L diesel engine entry
• Fixed issue with retrieving DTCs could cause sensor data communication issues
• Fixed missing fault sensors for '01 ABS Mk20E controllers
• Fixed no engine data for a '02 Durango

Ford
• Added engine VIN decoding to improve the automated vehicle selection process
• Added Remote Transmitter Programming instructions to the System Test lists
• Added late model IVD Initialization for ABS CAN controllers
• Added Occupancy Sensor Module system support
• Added ReZero Passenger Side Calibration for Airbag controllers
• Added Ford of Europe models (Fiesta, Focus, Galaxy, Ka, Maverick, Mondeo, Transit) support through '06
• Improved Air Suspension bi-directional controls by showing the operational instructions

GM
• Added '99 & '00 5.7 Liter L31 (R) Alternative engine support and active commands
• Added ABS for Product Line (Y) from '98 - '00
• Fixed communication issues for body and chassis systems
• Fixed missing transmission support for Buick LeSabre '00 3.8L L36
• Fixed missing TDC Learn support for '96 GMC Suburban 6.5L diesel (Engine F)
• Improved retrieving Freeze Frame information a little faster
• Fixed the Engine Speed bi-directional control for the '05 Chevy Suburban 5.3L
• Fixed the missing Automatic Transfer Case sensors for the '00 Chevy Blazer 4.3L L35 (W)

Hyundai/Kia
• Added complete ABS ES95620-03, ES95660-08, ES95660-13, ES95660-16, ES95660-17, ES95660-18, ES95660-19, ES95660-23, ES95660-32 system coverage. This completes the ABS coverage through model year '06
• Added EnhancedTransaxialL4MY04 actuation command support
• Added Delphi 14 ECM and TCM support
• Added Bosch CAN ECM and TCM support
• Added History DTC retrieval for supporting ABS and Airbag controllers
• Fixed early SRS controllers trouble code retrieval with multiple codes not properly retrieving with some Dell laptops

Honda
• Added Honda HRV model support
• Added Acura EL model support
• Added the following systems up to '06:
Anti-Lock Brakes System Type 1
Anti-Lock Brakes System Type 2
Anti-Lock Brakes System Type 3
Supplemental Restraint System '96 [Special Cable Required] Supplemental Restraint System '03
Supplemental Restraint System '06
Occupant Position Detection System
SWS
• Fixed double sensors reporting for PGMFI module '96 - '99

Jaguar
• Added '97 - '07 VDP and VDP Supercharger systems support
• Fixed S-Type '05 - '07 ATC initializing the controller locking out button inputs on the vehicle
• Fixed S-Type '05 - '07 ABS failing to retrieve DTCs when multiples are set
• Fixed XK8 and XKR BPM DTC retrieval

Mazda
• Added '06 Miata MX5 system support
• Added '06 MazdaSpeed system support
• Improved ABS CAN sensor support to include new '06 sensors
• Improved TPMS CAN sensor support to include new '06 sensors
• Improved all sensor auto detection times by as much as 2x
• Improved retrieving ABS trouble codes for early models
• Fixed select Restraint Control Module DTC retrieval not returning codes

Nissan
• Added Headlamp Leveling system DTC support
• Added Steering Angle Alignment function support
• Added ABS Steering Angle sensor support
• Fixed Powertrain controllers failing to enumerated with some Dell laptops

Porsche
• Added GT2 and GT3 model support
• Fixed 911 models WB O2 support not listing amongst the supported sensors

Subaru
• Added complete enhanced Engine and Automatic Transmission for model years '99 - '07
• Added enhanced ABS for model years '05 - '07
• Added Idle RPM and Ignition Timing Retard modification support

Toyota
• Added enhanced ABS CAN sensor support
• Improved bi-directional commands to filter out non-supported commands for from vehicles that support
A4 read memory output command
• Fixed EVAP bi-directional command not continuously running when left On
• Fixed ABS communication timing issues which resulted in some customers reporting incorrect data

07/20/2007 5.2.1 Release:
-------------------------
General
• Added more Vehicle Profiles to SpeedTracer
• Fixed data logging not playing back when buffer size is smaller then the buffer size or larger
• Improved graphing by adding support for a tab with two graphs

Ford
• Added missing '96 Ford Escort enhanced support

GM
• Added a check to make sure we don't walk out of the payload when pulling CAN DTCs, also added the
support for the multi-frame DTCs that are broken between two frames
• Added Oldsmobile Product Line (N) Body/Chassis for '04
• Removed the Odometer PID from the body support of the '99 Sonoma, DPID issues incorrectly setting up
• Fixed missing (R) series transmissions from light trucks '96 - '99

Honda
• Added a message to verify that the AutoEnginuity Enhanced Interface is used with the Honda expansion
• Fixed trouble code retrieval and clearing when not using AE Enhanced Interface and using Generic systems

Hyundai/Kia
• Added missing '96 - 02 Sportage 2.0L enhanced support
05/08/2007 5.2 Release:
-------------------------
General
• Added Dodge Sprinter to the supported vehicle list
• Added Porsche Cayman and Volkswagen Polo to the supported vehicle list
• Added warning for all controllers that require a special adaptor cable to be inlined to be checked when a connection was failed to be established
• Improved the data logging file parsing by increasing the size of the internal buffers so large sensor lists can be processed
• Improved the Spanish and German User Guide for the 5.x release
• Improved the Pocket PCs BlueTooth support of enhanced interfaces (BMW, Land Rover, and Jaguar) that were long response protocols and didn't work with previous versions
• Fixed AE Enhanced connector not being tested for after the first pass through the ports
• Fixed compatibility issue with USB hardware not working with a PC Wireless product
• Fix Pocket PC debugging logging file not being created (//My Documents//AutoEnginuity ScanTool.log)
• Fix Pocket PC BlueTooth connection failing to connect after a Disconnect then Connect attempt
• Fix Pocket PC clipping the VIN on the right-hand side of the display

BMW
• Added DME S54/S62 Electrical Fan Speed 50% and 90%
• Added MS42.1 and MS41.1 smooth running PIDs support
• Added MK60 ABS Bleed support (E46 non-M cars)
• Fixed MK60 bi-directional controls bug with Inlet Values
• Fixed DME MS42.1 DTC retrieval showing a false 00 FC code
• Fixed LCMIII trouble code clearing not working
• Fixed X5 4.6iS DME connection issues

Chrysler
• Added 2000 Chrysler Voyager and Grand Voyager to the list
• Added Transmission Quick Learn for NGC based transmissions
• Added Governor Pressure for JTEC vehicles
• Added the ME2.8 Engine Module support (Crossfire '04-'06)
• Added the EDC16C2 Engine Module support, Other systems all ready supported for (Jeep Liberty Diesel '05-'06)
• Added the CR2 and CR3 Engine Support (Sprinter '04-'06)
• Added the SIM-70 Engine controller for the Neon and PT Cruiser 1.6 Liter engine ('01-'05)
• Added 2.7L entry for the '01 Dodge Intrepid
• Added SBEC/JTEC System Tests:
Erase All DTC Fault Codes
Reset All Adaptive Memory Fuel Cells
Reset All Non-Volatile Memory
Reset CAM and Crank Misalignment
Reset CAM, Crank, and Sync Status Record
Reset Duty Cycle Monitor
Reset Engine Running Time Record
Reset Fuel Shut-off Record
Reset Intake Airflow Control Stepper Motor Position
Reset Trip Information
Set Minimum Throttle Position to Maximum

For NGC modules added reporting of:
Part Number
Reflash Program Counter
• Added warning message if system is CCD to warn that it is not supported at this time
• Changed showing of all the actuations available on a SBEC or JTEC module. Now only available actuations based on the engine size are shown
• Improved sensor auto detection speed by culling sensors known not supported on models
• Improved correct protocol selection algorithms
• Fixed freeze frame sensor for Fuel Level having decimal place
• Fixed generic powertrain from operating with enhanced option enabled
• Fixed AE Enhanced communications failure with some NGC controllers (Requires firmware 5 update)
• Fixed NGC-based actuations Set Idle speed, Actuate Fuel Injector, and Fuel Pump Relay not working

Ford
• Added Powerstroke '08 enhacned coverage support
• Added all missing PATS key programming for '96 - '06 (works with all variations now)
• Fixed Crown Victoria '98 and '99 having the incorrect ABS controllers in the system supported list
• Improved High and Low Speed Fan Control on vehicles that report Not Supported yet will still work

Jaguar
• Added all enhanced systems sensor, trouble code, and actuation support for SType, XJ, XK, and XType '95-'07
• Added System Tests:
Brake Sensor Setup
Display Last Alarm Activations (SLM and GEM)
Display Fuel Adaptation Tables
Fuel Adaptation Monitor
Electronic Parking Brake Release To Service
Front And/Or Rear Light Calibration (ADHLS and HCM)
Reset TCM Adaptations
Yaw and Lateral Accelerometer Calibration
Reset ABS Configurations
System Self Test (SType Only GEM, REM, DDM, PDM)
EVAP Leak Test
• Added all '07 DTC descriptions
• Improved Mode 6 support

GM
• Added 2004 Pontiac Bonneville Product Line H engine support
• Added the EVAP Vent Solenoid Bitmap for 2003 LT 4.3 and 4.8 Liter
• Added 5 bitmaps for '00 (K) LT Body Control Module, no missing sensors
• Added ABS Systems for (C) - '98 -'00 and '02 -'05, (K) - '98 -'99, (W) Oldsmobile - '98 -'02 and '04, (W) Chevrolet - '00, (G) - '01 -'03 Passenger
• Added 3.5 Liter for the Uplander
• Added 'ATC' addition to the transmission types that are associated with Automatic Transfer Case
• Fixed HeartBeat being enabled from affecting some GM controllers
• Fixed door lock actuation for '99-'02 J Body BCM controller
• Fixed issue with missing transmission on some vehicles (e.g. Chrysler '99 Blazer)
• Fixed the EVAP Vent control for all Yukon 5.3L
• Fixed the Body actuation list for Light truck's from '96 -'06

Mazda
• Fixed 626 '02 enhanced coverage missing from the vehicle selection list
05/08/2007 5.1 Release:
-------------------------

General
• Added support to show the hardware ID in case of mismatched hardware errors so the customer can determine which is connected currently to correct the mismatch
• Fixed the issue when no enhanced interface is created the system combo box does not contain any systems
• Fixed the issue when there is no valid AutoEnginuity Enhanced Interface serial number, only the firmware ROM version

BMW
• Fixed ABS MK60 not showing 5EXX trouble code descriptions
• Fixed ABS MK60 not working on the Z4 models
• Added Convertible Top Module 4 trouble code and PID support
• Added Safety and Information trouble code and PID support
• Added Electronic Power Steering trouble code and PID support
• Added Rain Sensing System PID support and Clear Adaptations system command
• Added Satellite-B Pillar Left trouble code and PID support
• Added Satellite-B Pillar Right trouble code and PID support

Chrysler
• Added 600+ U trouble code descriptions
• Added 500+ P trouble code descriptions
• Added 2500+ B trouble code descriptions
• Added 500+ C trouble code descriptions
• Added Freeze Frame display support for Non-PCode trouble codes
• Added a message when pulling DTCs for VPW body and chassis systems to tell the users that the codes are displayed as sensors
• Fixed pulling an extra DTC from CAN controllers
• Fixed decoding engine size and body code information from VINs being pulled generically
• Fixed an issue with duplicate Engine Speed PID in 2005 CAN NGC vehicles

Ford
• Added Injector Fault 9 and 10 for the Enhanced Powertrain CAN 6.8L models
• Added full system support for '04 - '06 SuperDuty 6.8L models
• Added Module ID support for non-CAN non-PCM controllers
• Improved all Crown Victoria sensor support for '96 - '06 models
• Fixed ABS Self-Test completing but not showing the DTCs for non-CAN controllers

GM
• Fixed incorrect sensors in the Body Information for the 2004 Truck K for HVAC
• Fixed an issue with transmission types specific to the Auto Transfer Case not showing up causing this system to be available

Honda
• Added PCM and transmission actuation commands support
• Added System Tests (where applicable):
Crank Position Sensor Notch Learn
DBW Throttle Carbon Clogging Status
DBW Throttle Carbon Clogging Reset
Engine Oil Replacement Reset
Off-Board EVAP Test (Level 2)
Resolver Zero-Position Offset Calibration

Hyundai/Kia
• Added more trouble code library support

Mazda
• Added text sensor reporting for all bit and mode sensors
• Added support to retrieve Mode 33 trouble codes on ISO controllers
• Added missing Protege 5 ABS and PCM for model years '01 - '03

Nissan
• Added Platina model support

04/15/2007 5.0 Release:
-------------------------

General
• Added the ability to print the data from the Graph, Meter, Grid, and O2 tabs
• Added the ability to to pause the displaying of all live data
• Added a conversions calculator for Length, Mass, Pressure, Volume units
• Added Hardware ROM version reporting in the About screen
• Added support for Hardware-based activation codes for all our USB-based solutions
• Added support to prompt the user to select the which systems to retrieve trouble codes from (current, all, or none)
• Added the ability to change systems without disconnecting by pressing F7
• Added support for Mode 6 test descriptions by mousing over the test ID row
• Improved connection speed by requiring the user to manually initiate the VIN retrieval if they so choose.
• Improved graphing support to include two more graphs
• Improved warnings for "OBD-II Not Found" and not connecting so they are more informative
• Improved Windows Vista support
• Fixed Live Data Grid/Graph/Meter not having translated Tool Tips
• Fixed issue where a second report will be saved with the previous report name only
• Fixed WB02 Voltage sensor range to correctly show the range as 0 - 8Vs
• Removed BMW M3-M5 special initialization type as BMW emissions recall 06E-A03 solves their non-compliance issues
• Removed the requirement that a live data tab be active for actuation controls to work

Vehicle Selection
• Added color-coded support to signify the vehicle selection process current status; red is used to show selected and
yellow is not used
• Added vehicle make specific ToolTip support for all selection fields
• Added a test to make sure the interface hardware supported selected systems before continuing
• Renamed Vehicle Configuration to Saved Session to clarify the true intent of the function
• Improved retrieving VINs by now pulling generic first, then each enhanced interfaces method automatically Instead of
forcing the user to select the make to get proper VIN retrieval methods in some cases
• Improved VIN decoding by automatically setting the vehicle model to Not Selected if there is no decoded VIN

BMW
• Added support to decode which airbag and ABS unit the vehicle has equipped
• Added complete CVM2, ZAEII and EGS832 system support
• Added complete Navigation, Steering Angle System, and Airbag MRSIV sensor coverage
• Added M42 M52TU bi-directional controls support
• Added Navigation support to the E46 M3 and E39 M5
• Added Steering Angle System and EGS832 support to the E36 M3
• Added more RAD, and MID trouble code descriptions to the library
• Added complete ABS/ASC 5.7, ABS/DSC 5.7, BIT, Airbag MRS II, NAV, SM/SML, ZKEIII, and EHC trouble code library support
• Added Sleep Mode and Transport Mode support for Radio, OnBoard Module, Multi-Input Display, and Lighting Check Modules
• Added displaying coding information for all models
• Added displaying service and inspection information for all models
• Added ABS MK20 Steering Angle adjust support
• Added ABS MK60 Steering Angle, Lateral Acceleration, and Pressure adjust support
• Fixed some ABS controllers initialization not completing
• Fixed some EGS controllers not retrieving trouble codes with full systems retrieval

Chrysler
• Added '96-'98 body codes based on make/model
• Added new hardware that is capable of VPW, CAN, and CCD as well as our existing SCI to our Chrysler interface
• Added SBEC, JTEC, CM551, CM845, and CM848 modules other available table sensors which also include OBDII Major
Monitors, Engineering Parameters, and more bitmapped sensors
• Added 2006 Jeep Commander support
• Added new hardware support that no longer requires device drivers and is Vista-compliant
• Added more descriptions to the bi-directional controls
• Added The Distance Since MIL Being Set to the sensor data list. If good trip counts has reported as zero it will not be
listed under the DTCs. JTEC and Cummins under the DTC and SBEC controllers it's located in the sensor data list. If
starts since failed has reported as zero it will not be listed under the DTCs
• Added retrieving DTC details status for NGC modules
• Added body and chassis DTCs sensor lists, to clear codes you would perform a normal code clearing
• Added Freeze Frame sensors for 2004-2005 JTEC vehicles
• Fixed retrieving erroneous codes for some JTEC and SBEC controllers
• Fixed the double reporting of DTCs
• Fixed issue with no sensor data for NGC controllers when in the past only able to read DTCs
• Fixed clearing non-CAN engine codes

Ford
• Added text sensor reporting for all bit and mode sensors
• Added full Instrument Cluster CAN sensor support
• Added Lincoln Zephyr '06 enhanced systems support
• Added F150 Heritage '04 enhanced systems support
• Added GEM/Timer system support to all Powerstroke 6.0L vehicles
• Added Trailer Brake Control system support for all supporting vehicles
• Added engine size detection to VIN decoding
• Added Automatic Transfer Case system support (Sensor/Actuations)
• Improved ABS support for '03 - '05 Navigator and '02 - '03 Expedition
• Improved HEC support for '03 - '05 Navigator and '02 - '03 Expedition
• Improved '99 - '03 Powerstroke 7.3L coverage by adding a few missing PCM sensors
• Fixed CAN ABS controllers single trouble code retrieval failure issue
• Fixed barometric pressure PID reporting slightly too high
• Fixed LTFTs not showing up in some cases
• Fixed Crown Victoria '05 - '06 powertrain and ABS using the wrong protocol
• Fixed '96 Yukon duplicate vehicle speed sensors listed

GM
• Added Air Pump Relay Active Command for 4.3 L35 Light Truck
• Added ABS support for Light truck Product line 'A' and 'B' from '01 - '06
• Improved Mode 6 support
• Fixed 5.7 Light Truck Powertrain sensor list to include missing O2 sensors
• Fixed 3.4 Light Truck Powertrain sensor list being empty
• Fixec EGR Position Error scaling for Saturn 1996 SL2

Honda
• Added all enhanced powertrain support for '96 - '06 models
• Added improved Mode 6 support

Hyundai/Kia
• Added text sensor reporting for all bit and mode sensors
• Added new Delhpi ECM, ABS, airbags, and BCM controller support (requires H/K body and chassis cable)
• Added Santa Fe 2.7L '05, Santa Fe 3.5L '03 - '05, Sonata 2.7L '99 - '00, '05, and Tucson V6 '04 - '05, Rio '05, Sephia
'96 - '99, Sedona 3.5L '02 - '03, Sportage '96 - '99, Tiburon '03 - '05, Rondo '07, and Spectra 1.8L '96 - '99 enhanced
powertrain support
• Added multi-system trouble code retrieval for the controllers
• Added the ability to reset the transaxle, traction control, and vehicle speed configurations for Siemens controllers
• Added trouble code status byte support for Siemens controllers
• Improved trouble code retrieval for the Siemens controllers
• Fixed Ignition Timing PIDs not being scaled correctly

Jaguar
• Improved diagnostics trouble code library support

Land Rover
• Added all enhanced systems support 02 - 07

Mazda
• Added non-Ford models '95 - '97 DTC support

Nissan
• Added text sensor reporting for all bit and mode sensors
• Added X-Trail model support
• Added support for Airbag Diagnostic Record translating the DTCs into full text descriptions
• Fixed Nissan Airbag DTCs not reporting with a certain DTC count size
• Fixed Nissan Idle Air Learn system test reporting failed to complete, yet the request would complete
• Fixed Nissan CAN ABS front wheel speed sensors being swap right and left

Subaru
• Improved Mode 6 support with new entries

Toyota
• Added ABS CAN support
• Added all ECB Utility functions support (ECB Invalid, Zero Down, and Linear Valve Offset Calibration)
• Added ABS functions support (Usual and Master Cylinder Stroke)
• Improved Mode 6 support
• Improved bi-directional controls throughput so that the reinitializing a controller is smoother for command requests
• Fixed airbag DTC support for all Scion models

01/08/2007 4.4.1 Release:
-------------------------

General
• Fixed Mode 6 not supported on non-Vista compliant devices
• Fixed reports not showing the AutoEnginuity logo
• Improved Spanish support by updating the User Guide and adding Spanish report XMLs

Ford
• Added GEM sensors support for 6.0L Powerstrokes

Toyota/Lexus/Scion
• Fixed ABS Wheel speed scaling on some vehicles reporting 10:1 to actual wheel speeds
• Fixed VPW Toyotas not displaying live sensor data

11/17/2006 4.4 Release:
-------------------------
General
• Added Honda VIN decoding support for 1996 - 2006 models
• Added a macro key (F4) for the Communication Configuration menu entry
• Fixed DTCs not being retrieved immediately on the first connection in rare cases
• Fixed Playback feature from reporting an error with any sensor with Time in the name
• Known issue for some Honda 29Bit CAN vehicles. Auto detection may not retrieve all PIDs supported. In this case turn off Auto Detection and manually select 29Bit CAN for the Vehicle Interface Type

BMW/MINI
• Added BMW Status byte support for trouble code reporting
• Added Seat and Steering Column Memory bi-directional controls for Head Restraint and Steering Column
• Added Transport Mode Clear support for some DMEs
• Added FC body/chassis controller descriptions for ABS, BMBT, RAD, IKE, ZKE, etc.
• Added MKIV ABS controllers PIDs support
• Fixed LCM Turn Indicator not showing any states
• Fixed X5 IKE DTC retrieval not working
• Fixed M3/M5 DME bi-directional controls not working
• Improved the MK60 ABS controllers reporting DTCs in SAE style instead of BMW style
• Fixed MK20 ABS controllers not reporting live data in some cases
• Known issues with selecting ABS controllers and not seeing DTCs. Use any other controller to retrieve error codes

Toyota/Lexus/Scion
• Added full text descriptions for all state and mode PIDs
• Added '06 complete model year support
• Added Hiace, Hilux, and ES330 model support
• Added OCC Sensitivity Check and Zero Calibration tests
• Added EMPS Signal Check, Clear Records, and Zero Point Init/Adjust support
• Added '06 Immobilizer bi-directional controls
• Added '06 Power Source Control and TM Control systems support
• Added TPWS Signal Check and Test Mode
• Improved Mode 6 support by adding translations and scaling information for a few missing CIDs
• Improved data rates for all non-CAN systems
• Improved bi-directional controls for all body and chassis systems by allowing for SystemBusy responses
• Fixed some controllers showing 0xBE00 unknown fault codes
• Fixed OCC Weight Information sensors reporting incorrect values
• Fixed DTC retrieval issues with History (Past) setting on some controllers not working
• Known issues connection issues exist with TPWS and Air Conditioning on some vehicles

Ford
• Added Pedal Position Sensor - Volts support for the Ford Powerstrokes
• Added PATS sensors support for 6.0L Powerstrokes
• Improved Mode 6 support for a couple of vehicles
• Fixed Mercury Grand Marquis engine controller not being set as a CAN protocol

Chrysler
• Added new Chrysler USB HID support
• Added VIN decoding for Jeep Grand Cherokee
• Fixed DTC pulling for some NGC, JTEC, and SBEC modules
• Fixed DTC clearing for some NGC controllers
• Fixed Dodge 2005 Stratus being mislabeled as Chrysler Stratus
GM
• Added ABS support for 2001 passenger C product line
• Fixed resolution for the Inside Air, Outside Air, Lower Outlet, and Upper Outlet temperature sensors
• Known issues when we fail to display all of the Failure Records, not enough buffer space in our current hardware design
10/03/2006 4.3.1 Release:
-------------------------

General
• Added Volvo VIN decoding
• Added Jaguar VIN decoding
• Added Jaguar Mode 6 decoding and translation
• Added Land Rover Mode 6 decoding and translation
• Added new Jaguar DTC library
• Improved Suzuki VIN decoding
• Improved KWP2000 vehicle connections
• Improved the Report generation by removing the hard-coding of the "Common Files" path
• Fixed Mazda Tribute VIN decoding
• Fixed Pocket PC Mobile not running on Windows 2003SE by removing the Chrysler CAN support
• Fixed 29Bit CAN Volvo support

BMW/MINI
• Added more engine trouble code descriptions
• Fixed MINI Mode 6 translations

Ford
• Fixed Manifold Pressure PIDs not supporting a large enough range for some modified Powerstrokes

GM
• Added Body Product Line H 2004-2005

Mazda
• Added support to determine if the selected system is available
• Added the following systems support for B-series trucks
Park Aid Module (ISO)
Tire Pressure Monitor (PWM)
Passive Anti-Theft System (PWM)
Enhanced 4x4 Control (ISO)
Remote Anti-Theft (ISO)
Integrate Air Bag Module (ISO)
• Fixed spelling issues in powertrain CAN and transmission CAN sensors

Nissan
• Fixed Nissan Titan Enhanced Powertrain not working

Toyota
Add EHPS Signal Check support
Fixed ABS tests showing the wrong instructions for the test initiated
Fixed Tundra models not having ABS

08/26/2006 4.3.0 Release
-------------------------

General
• Added Report Viewing built-into the ScanTool, so as to no longer require an XML browser
• Added 29-bit CAN support
• Added new Nissan/Infiniti body, chassis and network DTCs
• Improved data logging playback by doubling the input stream buffer size
• Improved feature activation process by reducing the steps involved
• Improved Actuation window support by disabling the actuation controls when not on non-live data tabs
• Fixed font settings not being restored between sessions
• Fixed VPW auto detect issues for 96-98 GM family vehicles
• Fixed umlaut characters not correctly being displayed with the XML reports
• Fixed O2 Sensor tab dropping the connection if the O2 sensor fails to report in
• Fixed meters displaying in red when the value was below 90% or less
• Fixed B2S1 Wide Band O2 Sensor 2 Equivalence Ratio and Voltage showing up as B3

BMW
• Added '96 - 05'
ABS/ASC/DSC (MK20/60)
Airbag Central (SRS)
Body (ZKE/ZME/KOM)
Cruise Control (GR)
Engine (DME)
Transmission (EGS)
Heater/Air Conditioning (IHKA)
Immobilizer (EWS)
Instrument Cluster
Mirror
Memory Driver and Passenger Side (SPMBT)
OnBoard Module (BM)
Parking Distance Control (PDC)
Radio (RAD)
Seat Memory (SMF)
Sliding Tilting/Roof (SMD)
Steering System (LEW)
Switching Center Console (SZM)
Multi-Input Display (MID)
Language Input System (SES)
Video Module (VID)
Multi-Function Steering Wheel (MFL)
Navigation System (NAV)
Automatic Interval Control (AIC/RLS)
Air Suspension (EHC)
Electric Throttle Body (EML)
• Added DDE/DME/EGS Reset Adaptions
• Added DDE/DME Service and Oil Interval Reset support
• Added Module Information reporting for all systems
• Added FC to OBDII translations for engine and transmission controllers

GM
• Added Module Availability Test to warn a user if a system is not present on the vehicle
• Added 3x Crank Sensor support for the '99 Pontiac Montana 3.4L
• Added Cruise Control system support for the '03 Montana
• Added the Engine Speed for the 96 Trans Am
• Added Product Line F for Passenger for years Chassis 1999-2002
• Added Passenger Chassis Product Line E - 1998-2000, W Buick - 2001-2005, D - 2003, W Olds - 2004, Y - 2004
• Added Light Truck Chassis Product Line V - 2002-2005, U - 2000-2005
• Added new chassis system 'CVRSS/ALC'• Improved misfire data for several years of passenger and light truck
• Fixed Fuel Pressure Sensor reporting incorrect data for the '96 Skylark 2.4L
• Fixed ABS response causing dropped packets with PCM responses
• Fixed invalid body active commands for the ’98 Olds Intrigue
• Fixed 4.3L (W) '96 Blazer EGR Desired fixed at 198%
• Fixed 4.8L LR4 (K) '04 Tahoe missing cylinders 7 and 8 misfire data
• Fixed No Communication errors from Saturn Body block commands
• Fixed active commands Vent Solenoid and Fuel Trim Reset for '96 Blazer
• Fixed an issue where the transmission types for some makes where missing
• Fixed missing product lines in the drop down list
• Fixed engine decoding issues from '96-'99
• Fixed several sensors for 2000-2002 6.0 liter and 6.6 Liter Engine and Transmission
• Fixed the broadcasting messages with the multi-packet request for only one response
• Fixed some spelling errors on some sensors
• Corrected the FTP and EGR Decel for 96 and 97 2.4 Liter engines (N)

Chrysler
• Added enhanced CAN systems support (to include: Airbag, ECM, ABS, transmissions, etc.)
• Added 2.4 L Dodge Neon to 2003
• Added more Cummins sensors:
High Pressure Command Fail Fuel Pressure
High Pressure Command Fail Fuel Pressure Set Point
Fan Clutch 1 PWM Duty Cycle
Cylinder Contribution 1-6
Cylinder Bank Contribution 1-2
• Added more Cummins SCI bi-directional controls
Reset Duty Cycle Monitor
Reset Trip Information
Cylinder 1-6 Cutout
Generator Field Test mode
Transmission VFS PWM
Transmission TCC
Transmission Overdrive
Lift Pump Test
Cylinder Performance Test
High Pressure Safety Valve Test

• Added more SCI bi- directional controls
Reset CAM, Crank and Sync Status Record
Reset Fuel Shut-off Record
Reset Engine Running Time Record
Reset All Non-Volatile Memory
Evaporative System Monitor Service Test Mode
Misfire Monitor Service Test Mode
EGR Solenoid Test Mode - Backpressure System
EGR Solenoid Test Mode - Linear System
Torque Converter Clutch Solenoid Test Mode
3-4 Gear Shift Solenoid Test Mode
Reset All Adaptive Memory Fuel Cells
Reset Intake Airflow Control Stepper Motor Position
Set Minimum Throttle Position to Maximum
• Fixed incorrect sensor values for older Chrysler vehicles using the SBEC controllers
• Fixed the issue with bi-dir not shutting off when commanded too
• Fixed the Freeze Frame Calculated Load unit value
• Fixed VIN decoding for a 2002 Grand Caravan
• Fixed bi-directional controls for NGC and JTEC/SBEC controllers

Ford
• Added PATS key programming
• Added "Software Level" reporting to the Vehicle Information feature
• Added Mercury Software and Vehicle Information reporting support
• Added Airbag module Passenger Seat Weight Sensor ReZero procedure support
• Added Falcon BF '05 - '06 support (Airbag, ECM, ICM, ABS, EATC, and 4x4)
• Added Expedition '05 - '06 support (Airbag, ECM, ICM, ABS, EATC, and 4x4)
• Added Ford of Europe Fusion '03 - '06 support (GEM, Airbag, ECM, TCM, ICM, ABS)
• Added UPS P32 '95 - '01 support (ABS and ECM)
• Added several PCM and DDM bi-directional controls
• Added IAT2 V and Temperature to the Mustang '03 - '04 product line
• Added Remote Anti-Theft System remote transmitter viewing and programming (some Lincoln vehicles are
not supported at this time)
• Added Escape Hybrid '05 - '07 support for the Hybrid Electrical Voltage system
• Improved EVAP Bay Test to show EVAP Canister and Canister Vent Duty Cycle during the test
• Fixed no longer showing diesel system tests for gasoline vehicles
• Fixed Crown Victoria '06 enhanced powertrain not working

Toyota
• Added Prius '03 - '06 ABS support
• Improved CAN data rates by caching multi-packet responses
• Fixed Prius '03 - '06 EMPS system not working
• Fixed CAN enhanced powertrain missing some supported PIDs
• Fixed CAN enhanced powertrain Purge Density Learning Value displaying with incorrect decimal position
• Fixed CAN DTC retrieval showing an erroneous C0100 code
• Fixed Tire Pressure Warning System support not enumerating with 2006 vehicles
• Fixed Total Fuel Trim Bank 1 and Bank 2 scaling bug

Nissan
• Added support for the Almera, Micra, Note, Patrol, Primera, Navara, Terrano, Versa models
• Added Self-Learn Control and Idle Air Volume Learn support
• Added CAN BCM support; including work support for Door Lock Unlock Set, Anti-LockOut Set, Horn Chirp
Set, Hazard Lamp Set, Multi-Answer Back Set, Auto-Lock Se, Panic Alarm Set, Trunk Open Set, Power Window
Down Set, Battery Saver Set, Custom Light Setting, Illumination Delay Set, Wiper Speed Setting, Reset
Setting Value, Room Lamp Timer Set, Security Alarm Set, Theft Alarm Trigger Erase)
• Improved CAN data rates by caching multi-packet responses
• Fixed Throttle Sensor 1 and 2 not working
• Fixed Accelerator Sensor 1 and 2 not working
• Fixed 4WD system Battery voltage sensor reporting incorrectly

Mazda
• Added Tribute and Protege '02 model coverage (GEM, IC, PCM, ABS)
• Added '96 and '97 Miata support
• Fixed Tire Pressure and Temperature having incorrect scaling values
• Fixed Tire Pressure Monitoring System Wheel Temperature and Pressure 4 sensor not being listed
• Fixed miscellaneous typos in the sensor list
• Fixed '03 Protege ABS and airbag systems not working
• Fixed retrieving all CAN system DTCs instead of retrieving from the selected system only
• Improved VIN decoding for all models

Hyundai/Kia
• Added Kia Amanti support for powertrain
• Added Kia VIN decoding

03/31/2006 4.1.0 Release:
-------------------------

General
• Added RF wireless support
• Added USB hardware serial number reporting in the About window
• Added more Subaru DTC descriptions
• Fixed 17th digit of VIN not showing up for Hyundai and Toyota
• Fixed warning message showing that not all IM Monitors have complete when Secondary Air Monitor had completed
• Fixed Playback Rate not working on the Grid control
• Fixed DTC/MIL Status Information from being used on the next vehicle connection if the next vehicle doesn't support DTC/MIL Status Information
• Fixed Pocket PC version DTC reports missing the first three characters of the DTC description
• Fixed Pocket PC version BlueTooth connection issues where it wouldn't find the connector
• Fixed KWP2000 Fast Init connection issues

Ford
• Added Ford FreeStyle '05 - '06 support
• Added Ford GT '03 -'04 support
• Added Ford of Europe support for Fairlane, Fairmont, Falcon, Galaxy, and LTD
• Added Software and Vehicle Module Information to Vehicle Information support to show PCM Part #, Copyright date, Octane Adjust, Fuel Octane, Fuel Type, Tire Size, Axle Ratio, Manual Transmission settings
• Fixed CAN ICP and ICP Desired sensor resolutions
• Fixed Powerstroke diesel trouble code retrieval
• Fixed Mode 6 $4B-30 decimal formatting

Toyota
• Added enhanced CAN support to include HV ECU and HV Battery systems, etc.
• Added enhanced airbag, CCS, A/C, and Immobilizer systems, etc.
• Added hundreds of new U and P trouble codes
• Added Hilux and Yaris support
• Added Vehicle Module Information to Vehicle Information support to show Model Code, Engine Type, Cylinders, etc.

GM
• Added DPID support (4x sampling)
• Added passenger and light truck chassis support
• Added Workhorse support for make and models (P42 Series, W22 Series, W24 Series, W52 Series, LF72 Series, P32 Series, W18 Series, FE20 Series, W42 Series)
• Added all EVAP PIDs
• Added '06 passenger (non-CAN) vehicle support
• Added EVAP System test for Saturn 1.9 '98 - '02
• Added Saturn body support
• Added L and M product for '00 - '01 Pontiac
• Added '06 passenger vehicle VIN decoding
• Fixed communication issues for some body modules
• Fixed GM trouble code retrieval for some systems body controllers
• Fixed GM Crank Variation Learn not being listed in some cases where support was available

Hyundai/Kai
• Added enhanced support for '98 - '04
Including European Hyundai Atoz, Centenial, Marcia and Kia Enterprise, Frontier, K2500, Pergio, Picanto, Pontentia, Pride
MELCO and Siemens/SiemensK21 Powertrain
MELCO and Siemens/SiemensK21 Transaxle
• Added ECU Identification Table support to Vehicle Information support to show CAL, CAL programming date, Boot software number, ECU software number, vehicle manufacturer and supplier ECU hardware number, etc.

Chrysler
• Added Vehicle Module Information to Vehicle Information support to show Product Line, Engine Size, Module Name, Module Part #
• Fixed sensor support table for '03 Dodge Stratus

Mazda
• Added CAN enhanced support for '03 - '06
• Added new systems:
4x4 Control Module CAN
Anti-Lock Brakes
Anti-Lock Brakes CAN
Enhanced Powertrain CAN
Electronic Power Steering CAN
Instrument Cluster CAN
Transmission Control Module CAN
Tire Pressure Monitor CAN
Restraint Control Module
Remote Keyless Entry CAN

01/06/2006 4.0.1 Release:
-------------------------

General
• Added Hungarian language support
• Added web-based activation process for enhanced options
• Added Honda Pilot support
• Added RF wireless support
• Fixed German and Spanish support not being updated to version 4.0
• Fixed KWP2000 auto detection issue with some slow baud init Mercedes
• Fixed Grid Units field drop-down list from ignoring a units change
• Fixed Pontiac TransAm/Formula VIN decoding
• Changed the update rate for DTCs and IM/Mode 6 information from 5 minutes to 10 minutes

Ford
• Fixed EVAP System Test not failing when fuel level is too low or high
• Fixed CAN LTFT and STFT ranges being too large
• Fixed CAN Throttle Position Sensors 1 and 2 not reporting the hundredths decimal places

Chrysler
• Added SCI serial connector support for Pocket PC/Windows Mobile and Windows PC
• Added (Gas) post-fix to Dodge R2500 and R3500 to differentiate between Cummins and gas versions of the truck
• Added more Dodge Dakota engine series support
• Changed to default to Chrysler make by default when connected to a SCI connector
• Changed Town & Country to report as Town&Country to fix XML reports from not being parsed correctly
• Fixed '02 - '05 Cummins temperature sensors reporting incorrectly
• Fixed Freeze Frame sensor value issues

GM
• Fixed retrieving DTCs from certain body controllers
• Fixed '03 - '05 Trai